Federal Aviation Administration June 18, 2008 – Federal Register Recent Federal Regulation Documents
Results 1 - 11 of 11
Airworthiness Directives; Boeing Model 747-400, 747-400D, and 747-400F Series Airplanes
We propose to adopt a new airworthiness directive (AD) for certain Boeing Model 747-400, 747-400D, and 747-400F series airplanes. This proposed AD would require installing an extension tube to the existing pump discharge port of the scavenge pump on the outboard side of the center fuel tank in the main fuel tank 2. This AD results from fuel system reviews conducted by the manufacturer. We are issuing this AD to prevent a fire or explosion in the fuel tank and consequent loss of the airplane.
Airworthiness Directives; Lindstrand Balloons Ltd. Models 42A, 56A, 60A, 69A, 77A, 90A, 105A, 120A, 150A, 180A, 210A, 240A, 260A, and 310A Balloons
We are superseding an existing airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Viking Air Limited Model DHC-2 Series Airplanes
We are superseding an existing airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Dassault Model Falcon 2000EX Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Dassault Model Falcon 2000EX and 900EX Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Lockheed Model L-1011 Series Airplanes
The FAA is superseding an existing airworthiness directive (AD), which applies to all Lockheed Model L-1011 series airplanes. That AD currently requires an inspection of the fuel level control switch, the fuel level control switch wiring harness, and the wiring harness conduit for damage, wear or chafing, broken or missing O-rings, or indications of electrical arcing. That AD also requires replacement of a certain conduit in the fuel level control switch wiring harness, installation of electrical sleeving over the fuel level control switch wiring harness, and installation of the fuel level control switch that has been so modified. This new AD requires an inspection of the fuel level control switch, wiring harnesses, and harness conduit for any visible damage, wear or chafing, broken or missing O-rings, or indications of electrical arcing; an inspection to determine the part number of the wiring harness conduit; and corrective actions if necessary. This new AD also requires replacing certain sleeving with new, improved sleeving over the wiring harness of the fuel level control switch. This AD results from a design review of the fuel tank systems. We are issuing this AD to prevent chafing of the fuel level control switch wiring harness, which could cause arcing and result in a fire in the fuel tank.
Airworthiness Directives; Dassault Model Falcon 2000EX Airplanes and Model Falcon 900EX Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Notice of Passenger Facility Charge (PFC) Approvals and Disapprovals
The FAA publishes a monthly notice, as appropriate, of PFC approvals and disapprovals under the provisions of the Aviation Safety and Capacity Expansion Act of 1990 (Title IX of the Omnibus Budget Reconciliation Act of 1990) (Pub. L. No. 101-508) and Part 158 of the Federal Aviation Regulations (14 CFR Part 158). This notice is published pursuant to paragraph d of Sec. 158.29.
Airworthiness Directives; M7 Aerospace LP SA226 and SA227 Series Airplanes
We are adopting a new airworthiness directive (AD) for certain M7 Aerospace LP SA226 and SA227 series airplanes. This AD requires you to inspect electrical wires/components, hydraulic and bleed air tube assemblies at left-hand (LH) and right-hand (RH) inboard wing leading edge/battery box areas, LH/RH wing stations 51.167 to 81.174, and at all feed-through locations into the LH/RH inboard keelson. If chafing/ arcing is found, this AD requires you to reposition, repair, and/or replace all chafed electrical wires, components, and hydraulic and bleed air tube assemblies, as required. This AD also requires you to reposition the battery lead cables, cover four-gauge wires leaving the battery box with firesleeving and secure with clamps, and protect the battery power cable. This AD results from five reports of chafing between the bleed air tube and the electrical starter cables with one incident resulting in a fire. We are issuing this AD to detect and correct chafing/arcing of electrical wires, components, and bleed air lines. This condition could result in arcing of the exposed wires and burn a hole in the bleed air line or the nearby hydraulic line, and lead to a possible hydraulic fluid leak and fire in the engine nacelle compartment.
Airworthiness Directives; Viking Air Limited Models DHC-2 Mk. I, DHC-2 Mk. II, and DHC-3 Airplanes
We are superseding an existing airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; GENERAL AVIA Costruzioni Aeronatiche Models F22B, F22C, and F22R Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
