Federal Aviation Administration December 14, 2005 – Federal Register Recent Federal Regulation Documents
Results 1 - 11 of 11
Petitions for Exemption; Summary of Petitions Received
Pursuant to FAA's rulemaking provisions governing the application, processing, and disposition of petitions for exemption part 11 of Title 14, Code of Federal Regulations (14 CFR), this notice contains a summary of certain petitions seeking relief from specified requirements of 14 CFR. The purpose of this notice is to improve the public's awareness of, and participation in, this aspect of FAA's regulatory activities. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of any petition or its final disposition.
Notice of Opportunity for Public Comment on Surplus Property Release at Aiken Municipal Airport, Aiken, SC
Under the provisions of Title 49, U.S.C. 47153(c), notice is being given that the FAA is considering a request from the City of Aiken to waive the requirement that approximately 94 acres of surplus property, located at the Aiken Municipal Airport, be used for aeronautical purposes.
Noise Exposure Map Notice
The Federal Aviation Administration (FAA) announces its determination that the noise exposure maps submitted by the City of Cincinnati for the Cincinnati-Municipal Lunken Airport under the provisions of the Aviation Safety and Noise Abatement Act (Act), 49 U.S.C. 47501, et seq. and the Federal Aviation Regulations (FAR), 14 CFR part 150 (part 150) are in compliance with applicable requirements.
Proposed Establishment of Class E Airspace; Nicholasville, KY
This notice proposes to establish Class E airspace at Nicholasville, KY. Area Navigation (RNAV) Global Positioning System (GPS) Standard Instrument Approach Procedures (SIAPs) Runway (RWY) 9 and RWY 27 have been developed for Lucas Field Airport. As a result, controlled airspace extending upward from 700 feet Above Ground Level (AGL) is needed to contain the SIAPs and for Instrument Flight Rules (IFR) operations at Lucas Field Airport. The operating status of the airport will change from Visual Flight Rules (VFR) to include IFR operations concurrent with the publication of the SIAPs.
Airworthiness Directives; Boeing Model 767-200 and -300 Series Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Boeing Model 767-200 and -300 series airplanes. This AD requires measuring the turnbuckle gap of the inflation cylinder of the off-wing emergency escape slide; corrective action if necessary; and installing a safety device on the inflation cylinder of the off-wing emergency escape slide. This AD results from a report indicating that the inflation trigger cable may inadvertently disconnect from the inflation turnbuckle of the inflation cylinder of the off-wing emergency escape slide, due to incorrect spacing of the cable insertion gap; and additional reports indicating that the pull force increase mechanism on the off-wing charged cylinder assemblies of the escape slide may be inadvertently disengaged. We are issuing this AD to prevent failed deployment of the emergency escape slide during an emergency, which could impede an evacuation and result in injury to passengers or airplane crewmembers, or inadvertent inflation and loss of an emergency escape slide during flight, which could result in possible structural damage to the airplane.
Airworthiness Directives; Sabreliner Model NA-265, NA-265-20, NA-265-30, NA-265-40, NA-265-50, NA-265-60, NA-265-65, NA-265-70, and NA-265-80 Series Airplanes
The FAA is superseding an existing airworthiness directive (AD), which applies to certain Sabreliner Model NA-265-40, NA-265-50, NA-265-60, NA-265-70, and NA-265-80 series airplanes. That AD currently requires repetitive inspections for discrepancies in the front and rear spars of the wing in the area of the wing center section, and in the lugs on the rear spar and wing trailing edge panel rib, and corrective actions if necessary. This new AD expands the applicability of the existing AD and requires new repetitive inspections for fuel leaks of the front and rear spars of the wing, and for discrepancies in the front and rear spars of the wing in the area of the wing center section, and in the lugs on the rear spar and wing trailing edge panel rib. This AD also requires related investigative and corrective actions, if necessary. This AD results from reports of cracking in the upper and lower flanges of the front and rear spars of the wing near the wing center section, and in the lugs on the rear spar. We are issuing this AD to detect and correct cracking or other discrepancies in these areas, which could result in structural failure of the wing.
Airworthiness Directives; Empresa Brasileira de Aeronautica S.A. (EMBRAER) Model ERJ 170 Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain EMBRAER Model ERJ 170 airplanes. This AD requires doing a general visual inspection of the passenger seat track attachments to determine if the attachment rod is installed and to check the torque value of the attachment bolts, and doing any corrective actions if necessary. This AD results from the finding of missing rods, which attach the passenger seat tracks to the airplane structure to absorb loads. We are issuing this AD to detect and correct missing attachment rods, which could result in reducing the ability of the seat to withstand a hard landing or rejected takeoff and possible injury to passengers.
Airworthiness Directives; Airbus Model A330-243, -341, -342, and -343 Airplanes Equipped with Rolls-Royce RB211 TRENT 700 Engines
The FAA is adopting a new airworthiness directive (AD) for certain Airbus Model A330-243, -341, -342, and -343 airplanes equipped with Rolls-Royce RB211 TRENT 700 engines. This AD requires modifying the cowl assemblies of the left- and right-hand thrust reversers. This AD results from a review of certification tests of the thrust reverser, which revealed that certain structural components within the C-duct need strengthening to meet high fatigue loads and maintain structural integrity. We are issuing this AD to prevent fatigue cracking of the hinges integrated into the 12 o'clock beam of the thrust reversers, which could result in separation of a thrust reverser from the airplane, and consequent reduced controllability of the airplane.
Airworthiness Directives; Airbus Model A330-300, A340-200, and A340-300 Series Airplanes
The FAA is superseding an existing airworthiness directive (AD), which applies to certain Airbus Model A330-300, A340-200, and 340-300 series airplanes. The existing AD requires repetitive inspections to detect cracking of the fuselage skin in the area of the VHF2 antenna, and repair if necessary. The existing AD also provides for optional terminating action for the repetitive inspections. This new AD requires accomplishment of the previously optional terminating action, and revises the applicability by removing certain airplanes. This AD is prompted by the need to change the applicability of the existing AD and to mandate the formerly optional terminating action. We are issuing this AD to prevent cracking of the fuselage skin in the area of the VHF2 antenna, which could result in depressurization of the airplane.
Airworthiness Directives; Airbus Model A300 B2 Series Airplanes, Model A300 B4 Series Airplanes, Model A310-200 Series Airplanes, Model A310-300 Series Airplanes; and Model A300 B4-600, B4-600R, and F4-600R Series Airplanes, and Model C4-605R Variant F Airplanes (Collectively Called A300-600 Series Airplanes)
The FAA is adopting a new airworthiness directive (AD) for certain Airbus transport category airplanes. This AD requires repetitive eddy current inspections for cracks of the stiffener fittings of the fuselage at frame (FR) 12A, and corrective actions if necessary. This AD also provides a terminating action for the inspections. This AD results from reports of cracks on the upper attachment fitting of the stiffener fitting at FR12A. We are issuing this AD to prevent failure of the stiffener fittings, which could result in the reduced structural integrity of the floor and rods around FR 12A.
Airworthiness Directives; Empresa Brasileira de Aeronautica S.A. (EMBRAER) Model EMB-135BJ, -135ER, -135KE, -135KL, and -135LR Airplanes; and Model EMB-145, 145ER, -145MR, -145LR, -145XR, -145MP, and -145EP Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain EMBRAER airplanes listed above. This AD requires modifying the drain system of the auxiliary power unit (APU) by installing a scavenge pump and, for certain airplanes, replacing the APU exhaust assembly. This AD results from a report of fuel leaking from the APU feeding line and accumulating inside the APU compartment because the drain system is inadequate when the APU is running. We are issuing this AD to prevent fuel accumulation and subsequent flammable fuel vapors in the APU cowling, which, combined with an ignition source, could result in a fire or explosion.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
