Federal Aviation Administration November 30, 2005 – Federal Register Recent Federal Regulation Documents

These special conditions are issued to Garmin AT, Inc., 2345 Turner Rd. SE, Salem, OR 97302, for a Supplemental Type Certificate for the Mooney M20M and M20R. These airplanes will have novel and unusual design features when compared to the state of technology envisaged in the applicable airworthiness standards. These novel and unusual design features include the installation of an electronic flight instrument system (EFIS) display, Model G-1000, manufactured by Garmin International, for which the applicable regulations do not contain adequate or appropriate airworthiness standards for the protection of these systems from the effects of high intensity radiated fields (HIRF). These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to the airworthiness standards applicable to these airplanes.

This amendment adopts miscellaneous amendments to the required IFR (instrument flight rules) altitudes and changeover points for certain Federal airways, jet routes, or direct routes for which a minimum or maximum en route authorized IFR altitude is prescribed. This regulatory action is needed because of changes occurring in the National Airspace System. These changes are designed to provide for the safe and efficient use of the navigable airspace under instrument conditions in the affected areas.

The FAA is adopting a new airworthiness directive (AD) for McCauley Propeller Systems propeller assemblies, models 2D34C53/74E-X; D2A34C58/90AT-X; 3AF32C87/82NC-X; D3AF32C87/82NC-X; D3A32C88/82NC-X; D3A32C90/82NC-X; and 3AF34C92/90LF-X. This AD requires, within 10 flight hours or 10 days after the effective date of this AD, whichever occurs first, removing certain serial number propeller hubs from service. This AD results from a report by the manufacturer that they manufactured and released 40 propeller hubs with improperly machined socket retention threads. We are issuing this AD to prevent cracked propeller hubs, which could cause failure of the propeller hub, blade separation, and loss of control of the airplane.