Department of Transportation December 2023 – Federal Register Recent Federal Regulation Documents
Results 1 - 50 of 226
Airworthiness Directives; Leonardo S.p.a. Helicopters
The FAA is adopting a new airworthiness directive (AD) for all Leonardo S.p.a. Model A109E, A109S, AW109SP, A119, and AW119 MKII helicopters. This AD was prompted by multiple reports of excessive axial play on the ball bearing of the lower half of the main rotor (MR) rotating scissor assembly. This AD requires one-time scissor coupling and axial play inspections and repetitive quantitative axial play inspections and, depending on the results, additional inspections and replacing certain parts. This AD also requires reporting information and prohibits installing certain parts unless certain inspections have been accomplished. These requirements are specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Transforming Transportation Advisory Committee; Public Meeting
The Office of the Secretary of Transportation (OST) announces a public meeting of the Transforming Transportation Advisory Committee (TTAC) on Thursday, January 18, 2024. This notice announces the date, time, and location of the meeting, which will be virtually open to the public. The purpose of the TTAC is to provide information, advice, and recommendations to the Secretary on matters relating to transportation innovations.
Airworthiness Directives; Piaggio Aviation S.p.A. Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Piaggio Aviation S.p.A. (Piaggio) Model P-180 airplanes. This AD is prompted by a report of corrosion on the various aluminum alloy reinforcements in the horizontal stabilizer (HS) central box caused by a humid environment inside the box from water ingress and/or condensation. This AD requires a one-time detailed inspection of the HS central box for corrosion; an assessment of the corrosion level; and depending on the determination, repetitive detailed inspections of the HS central box for corrosion and the internal composite structure for surface cracks, distortion, and damage; and repair or replacement of the HS assembly. Repair or replacement of the HS assembly is terminating action for the repetitive inspections. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Pilatus Aircraft Ltd. Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Pilatus Aircraft Ltd. (Pilatus) Model PC-24 airplanes. This AD was prompted by a determination that the titanium threaded bolts at the forward end of the short rudder trim tab actuating rods could be subject to unexpectedly high oscillating loads due to aerodynamic forces acting on the rudder trim tab. This AD requires periodic replacement of affected titanium threaded bolts, a one-time inspection of the rudder mass balance arm and other elements of the rudder trim tab installation for correct attachment, damage (gouges), cracks, deformation, surface finish, and corrosion on any surrounding parts and, depending on findings, accomplishment of applicable corrective actions, as specified in a European Union Aviation Safety Agency (EASA) emergency AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; The Boeing Company Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for certain The Boeing Company Model MD-11 and MD-11F airplanes equipped with General Electric (GE) CF6-80C2D1F high-bypass turbofan engines. This proposed AD was prompted by a report of a Model MD-11F airplane experiencing an uncommanded deployment of a thrust reverser in-flight at low altitude. This proposed AD would require a one-time detailed inspection of the engine pylon thrust reverser control system wire harnesses and applicable on-condition actions. The proposed AD would also require repetitive detailed inspections and wire integrity tests of the engine thrust reverser control system wire harnesses (in the pylon), junction box and junction box cover, left side and right side thrust reverser electrical harnesses, core (engine compartment) miscellaneous wire harness assembly, and 30 degree bulkhead wire harness assembly; and applicable on-condition actions. This AD also requires reporting. The FAA is proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; International Aero Engines, LLC Engines
The FAA is withdrawing a notice of proposed rulemaking (NPRM) that proposed to supersede Airworthiness Directive (AD) 2022-19-15, which applies to certain International Aero Engines, LLC (IAE LLC) Model PW1100G series engines; and AD 2023-16-07, which applies to certain IAE LLC Model PW1100G series engines and PW1400G series engines. AD 2022-19-15 requires an angled ultrasonic inspection (AUSI) of the high-pressure turbine (HPT) 1st-stage disk and HPT 2nd-stage disk, and replacement if necessary. AD 2023-16-07 requires an AUSI of the HPT 1st-stage hub (also known as the HPT 1st-stage disk) and HPT 2nd-stage hub (also known as the HPT 2nd-stage disk) for cracks, and replacement if necessary, which is terminating action for AD 2022-19- 15. The NPRM was prompted by a manufacturer investigation that determined an increased risk of powder metal anomalies for all powder metal parts in certain powder metal production campaigns, which are susceptible to failure significantly earlier than previously determined. The NPRM would have retained the AUSI requirement for certain HPT 1st-stage and HPT 2nd-stage hubs from AD 2023-16-07. The NPRM would also have required performing an AUSI of the HPT 1st-stage hub, HPT 2nd-stage hub, high-pressure compressor (HPC) 7th-stage integrally bladed rotor (IBR-7), and HPC 8th-stage integrally bladed rotor (IBR-8) for cracks and replacement if necessary. The NPRM would also have required accelerated replacement of the HPC IBR-7, HPC IBR-8, HPC rear hub, HPT 1st-stage hub, HPT 1st-stage air seal, HPT 1st-stage blade retaining plate, HPT 2nd-stage hub, HPT 2nd-stage blade retaining plate, and HPT 2nd-stage rear seal. Since issuance of the NPRM, the FAA has received information that an error was inadvertently included in the compliance times for some of the HPT 1st-stage and 2nd-stage hubs, which would have required removal significantly later than necessary. Accordingly, the NPRM is withdrawn.
Airworthiness Directives; Airbus Helicopters
The FAA is superseding Airworthiness Directive (AD) 2022-27- 09, which applied to certain Airbus Helicopters Model EC130T2 helicopters. AD 2022-27-09 required repetitively inspecting the vibration level on the tail rotor drive shaft and, depending on the results, taking corrective action. AD 2022-27-09 also required reporting information and prohibited installing certain rotor drive shafts unless the inspection was done. Since the FAA issued AD 2022-27- 09, Airbus Helicopters revised its service information to update the procedures for inspecting that vibration level, reduce an allowable vibration level, and clarify when a balance correction may be accomplished. This AD was prompted by the determination that a certain vibration measurement tool was providing unexpected results and therefore the threshold must be revised. This AD continues to require certain actions in AD 2022-27-09 and also revises the procedures for inspecting the vibration level on the tail rotor drive shaft and depending on these results, requires replacing certain parts, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Macquarie Infrastructure Partners V GP, LLC-Control Exemption-Northern Indiana Railroad Company, LLC
Airworthiness Directives; International Aero Engines, LLC Engines
The FAA proposes to supersede Airworthiness Directive (AD) 2022-19-15, which applies to certain International Aero Engines, LLC (IAE LLC) Model PW1100G series engines; and AD 2023-16-07, which applies to certain IAE LLC Model PW1100G series engines and PW1400G series engines. AD 2022-19-15 requires an angled ultrasonic inspection (AUSI) of the high-pressure turbine (HPT) 1st-stage disk and HPT 2nd- stage disk, and replacement if necessary. AD 2023-16-07 requires an AUSI of the HPT 1st-stage hub (also known as the HPT 1st-stage disk) and HPT 2nd-stage hub (also known as the HPT 2nd-stage disk) for cracks, and replacement if necessary, which is terminating action for AD 2022-19-15. Since the FAA issued those two ADs, an investigation determined an increased risk of powder metal anomalies for all powder metal parts in certain powder metal production campaigns, which are susceptible to failure significantly earlier than previously determined. This proposed AD would retain the AUSI requirement for certain HPT 1st-stage and HPT 2nd-stage hubs from AD 2023-16-07. This proposed AD would also require performing an AUSI of the HPT 1st-stage hub, HPT 2nd-stage hub, high-pressure compressor (HPC) 7th-stage integrally bladed rotor (IBR-7), and HPC 8th-stage integrally bladed rotor (IBR-8) for cracks and replacement if necessary. This proposed AD would also require accelerated replacement of the HPC IBR-7, HPC IBR-8, HPC rear hub, HPT 1st-stage hub, HPT 1st-stage air seal, HPT 1st-stage blade retaining plate, HPT 2nd-stage hub, HPT 2nd-stage blade retaining plate, and HPT 2nd-stage rear seal. The FAA is proposing this AD to address the unsafe condition on these products.
Revisions to Civil Penalty Amounts, 2024
This final rule provides the statutorily prescribed 2024 adjustment to civil penalty amounts that may be imposed for violations of certain DOT regulations.
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for certain Bombardier, Inc., Model CL-600-2B16 (601-3A, 601-3R, and 604 Variants) airplanes. This proposed AD was prompted by a report indicating that a new filter plate connector for the nose wheel steering (NWS) system electronic control module (ECM) does not meet certain certification requirements. This proposed AD would require replacing all affected non-compliant ECMs. This proposed AD would also prohibit the installation of affected parts under certain conditions. The FAA is proposing this AD to address the unsafe condition on these products.
Coastwise Endorsement Eligibility Determination for a Foreign-Built Vessel: White Lightning (Motor); Invitation for Public Comments
The Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to issue coastwise endorsement eligibility determinations for foreign-built vessels which will carry no more than twelve passengers for hire. A request for such a determination has been received by MARAD. By this notice, MARAD seeks comments from interested parties as to any effect this action may have on U.S. vessel builders or businesses in the U.S. that use U.S.-flag vessels. Information about the requestor's vessel, including a brief description of the proposed service, is listed below.
Coastwise Endorsement Eligibility Determination for a Foreign-Built Vessel: TACKLE BOX (Motor); Invitation for Public Comments
The Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to issue coastwise endorsement eligibility determinations for foreign-built vessels which will carry no more than twelve passengers for hire. A request for such a determination has been received by MARAD. By this notice, MARAD seeks comments from interested parties as to any effect this action may have on U.S. vessel builders or businesses in the U.S. that use U.S.-flag vessels. Information about the requestor's vessel, including a brief description of the proposed service, is listed below.
Coastwise Endorsement Eligibility Determination for a Foreign-Built Vessel: Ra (Motor); Invitation for Public Comments
The Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to issue coastwise endorsement eligibility determinations for foreign-built vessels which will carry no more than twelve passengers for hire. A request for such a determination has been received by MARAD. By this notice, MARAD seeks comments from interested parties as to any effect this action may have on U.S. vessel builders or businesses in the U.S. that use U.S.-flag vessels. Information about the requestor's vessel, including a brief description of the proposed service, is listed below.
Coastwise Endorsement Eligibility Determination for a Foreign-Built Vessel: OFF WATCH (Motor); Invitation for Public Comments
The Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to issue coastwise endorsement eligibility determinations for foreign-built vessels which will carry no more than twelve passengers for hire. A request for such a determination has been received by MARAD. By this notice, MARAD seeks comments from interested parties as to any effect this action may have on U.S. vessel builders or businesses in the U.S. that use U.S.-flag vessels. Information about the requestor's vessel, including a brief description of the proposed service, is listed below.
Coastwise Endorsement Eligibility Determination for a Foreign-Built Vessel: ODIN (Motor); Invitation for Public Comments
The Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to issue coastwise endorsement eligibility determinations for foreign-built vessels which will carry no more than twelve passengers for hire. A request for such a determination has been received by MARAD. By this notice, MARAD seeks comments from interested parties as to any effect this action may have on U.S. vessel builders or businesses in the U.S. that use U.S.-flag vessels. Information about the requestor's vessel, including a brief description of the proposed service, is listed below.
Coastwise Endorsement Eligibility Determination for a Foreign-Built Vessel: MIKHAYA (Sail); Invitation for Public Comments
The Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to issue coastwise endorsement eligibility determinations for foreign-built vessels which will carry no more than twelve passengers for hire. A request for such a determination has been received by MARAD. By this notice, MARAD seeks comments from interested parties as to any effect this action may have on U.S. vessel builders or businesses in the U.S. that use U.S.-flag vessels. Information about the requestor's vessel, including a brief description of the proposed service, is listed below.
Amendment of VOR Federal Airways V-48, V-52, V-216, and V-434, and Revocation of VOR Federal Airway V-206 in the Vicinity of Ottumwa, IA
This action proposes to amend Very High Frequency Omnidirectional Range (VOR) Federal Airways V-48, V-52, V-216, and V- 434, and revoke VOR Federal Airway V-206. The FAA is proposing this action due to the planned decommissioning of the VOR portion of the Ottumwa, IA (OTM), VOR/Distance Measuring Equipment (VOR/DME) navigational aid (NAVAID). The Ottumwa VOR is being decommissioned in support of the FAA's VOR Minimum Operational Network (MON) program.
Airworthiness Directives; Embraer S.A. (Type Certificate Previously Held by Yaborã Indústria Aeronáutica S.A.; Embraer S.A.) Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Embraer S.A. Model ERJ 190-400 airplanes. This AD was prompted by a report of unexpected wear on the wing hinge bearing assembly of the aileron surfaces found during the functional test of the aileron control system backlash. This AD requires repetitive inspections of the press-fitted bushings of the wing ailerons for migration and broken sealant, measurements of the distance between the aileron surfaces and hinge fittings, functional checks of the backlash of the wing aileron control system, and all applicable related investigative and corrective actions, as specified in an Ag[ecirc]ncia Nacional de Avia[ccedil][atilde]o Civil (ANAC) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Amendment of Class E Airspace; Statesboro, GA
This action amends Class E airspace extending upward from 700 feet above the surface for Statesboro-Bulloch County Airport, Statesboro, GA, to support the revised area navigation (RNAV) instrument approach procedure. This action increases the radius of the Class E airspace extending upward from 700 feet above the surface, and updates the airport's name and geographic coordinates.
Airworthiness Directives; BAE Systems (Operations) Limited Airplanes
The FAA proposes to supersede Airworthiness Directive (AD) 2022-25-18, which applies to certain BAE Systems (Operations) Limited Model BAe 146 and Model Avro 146-RJ series airplanes. AD 2022-25-18 requires repetitive inspections for cracking of the main landing gear (MLG) side stay outer link and replacement if necessary. Since the FAA issued AD 2022-25-18, additional investigations of the causes of the cracking were conducted. This proposed AD would require a reduction of the repetitive visual inspection interval, provide optional repetitive special detailed inspections, accomplishing a one-off dimensional tolerance check and performing a repetitive lubrication of the MLG side stay outer link pivot, as specified in a United Kingdom (U.K.) Civil Aviation Authority (CAA) (U.K. CAA) AD, which is proposed for incorporation by reference (IBR). The FAA is proposing this AD to address the unsafe condition on these products.
Amendment of Class E Airspace; Thomasville, GA
This action amends Class E airspace extending upward from 700 feet above the surface for Thomasville Regional Airport, Thomasville, GA. This action increases the existing radius, adds an extension to the northeast, and updates the airport's name.
Extension of the Prohibition Against Certain Flights in the Damascus Flight Information Region (FIR) (OSTT)
This action extends the prohibition against certain flight operations in the Damascus Flight Information Region (FIR) (OSTT) by all: U.S. air carriers; U.S. commercial operators; persons exercising the privileges of an airman certificate issued by the FAA, except when such persons are operating U.S.-registered aircraft for a foreign air carrier; and operators of U.S.-registered civil aircraft, except when the operator of such aircraft is a foreign air carrier, for an additional five years, from December 30, 2023, until December 30, 2028. The FAA finds this action necessary to address significant safety-of- flight risks to U.S. civil aviation associated with the enduring complex conflict in Syria. The FAA also republishes the approval process and exemption information for this Special Federal Aviation Regulation (SFAR), consistent with other recently published flight prohibition SFARs.
Amendment of Jet Route J-211 and Revocation of VOR Federal Airway V-41; Youngstown, OH
This action proposes to amend Jet Route J-211 and to revoke Very High Frequency Omnidirectional Range (VOR) Federal Airway V-41. The FAA is proposing this action due to the planned decommissioning of the VOR portion of the Youngstown, OH (YNG), VOR/Tactical Air Navigation (VORTAC) navigational aid (NAVAID). The Youngstown VOR is being decommissioned in support of the FAA's VOR Minimum Operational Network (MON) program.
Airworthiness Directives; Rolls-Royce Deutschland Ltd & Co KG Engines
The FAA is superseding Airworthiness Directive (AD) 2021-25-04 for certain Rolls-Royce Deutschland Ltd & Co KG (RRD) Model Trent 1000 engines. AD 2021-25-04 required operators to revise the airworthiness limitations section (ALS) of their existing approved continuous airworthiness maintenance program by incorporating the revised tasks of the applicable time limits manual (TLM) for each affected model turbofan engine. Since the FAA issued AD 2021-05-04, the manufacturer revised the TLM to introduce new or more restrictive tasks and limitations and associated thresholds and intervals for life-limited parts, which prompted this AD. This AD requires revising the ALS of the operator's existing approved engine maintenance or inspection program, as applicable, to incorporate new or more restrictive tasks and limitations and associated thresholds and intervals for life-limited parts, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Notice of Proposed Nonavailability Waiver of Buy America Requirements for the Nevada Department of Transportation To Purchase Certain High-Speed Rail Components
The Federal Railroad Administration (FRA) is seeking comments on whether to grant a waiver of its Buy America requirements to the Nevada Department of Transportation (NVDOT) for certain components that are not produced in the United States for use in a high-speed passenger train project between Las Vegas, NV and Rancho Cucamonga, CA (Project). FRA selected the Project for funding under the Federal-State Partnership for Intercity Passenger Rail Program (FSP Program), and therefore, FRA's Buy America requirements apply to the Project. FRA's Buy America requirements include both FRA's statutory requirements, which require 100 percent of the manufactured products and steel and iron used in an FRA-funded project to be produced in the United States, and the Build America, Buy America Act (BABA), which requires that all construction materials used in the FRA-funded project be produced in the United States. FRA is not proposing to waive the applicable BABA requirements for construction materials used in the Project, and therefore this proposed waiver would not apply to the construction materials used in the Project. The proposed waiver would apply to the trainset, signal systems, high-speed rail turnout and fire alarm systems based on the domestic nonavailability of such components, as identified by NVDOT's railroad operating partner Brightline West and the two potential suppliers (Alstom and Siemens) of the rolling stock and signaling systems for the project. NVDOT and Brightline estimate that over 95 percent of the total direct dollar expenditures for the Project would be spent on domestically sourced products and labor, including 100 percent of the civil infrastructure costs.
Notice of Final Action of Waiver With Respect to Land; Coleman A. Young Municipal Airport, Detroit, MI
The FAA is providing notice of a release of Federal obligations for one land parcel at Coleman A. Young Municipal Airport, Detroit, Michigan.
Agency Information Collection Activities: Notice of Request for Extension of Currently Approved Information Collection
The FHWA invites public comments about our intention to request the Office of Management and Budget's (OMB) approval for renewal of an existing information collection that is summarized below under SUPPLEMENTARY INFORMATION. We are required to publish this notice in the Federal Register by the Paperwork Reduction Act of 1995.
Agency Information Collection Activities: Notice of Request for Renewal of Currently Approved Information Collection
The FHWA has forwarded the information collection request described in this notice to the Office of Management and Budget (OMB) for approval of a renewal of information collection. We published a Federal Register Notice with a 60-day public comment period on this information collection on October 18, 2023. We are required to publish this notice in the Federal Register by the Paperwork Reduction Act of 1995.
Quarterly Rail Cost Adjustment Factor
The Surface Transportation Board has adopted the first quarter 2024 Rail Cost Adjustment Factor and cost index filed by the Association of American Railroads.
Amendment of Class D and Class E Airspace; Huntington, WV
This action proposes to amend Class D airspace and E airspace extending upward from 700 feet above the surface for Tri-State/Milton J. Ferguson Field, Huntington, WV, and removes unnecessary verbiage from the descriptor header.
Transportation Services for Individuals With Disabilities: ADA Standards for Transportation Facilities
The U.S. Department of Transportation (DOT, or Department) is extending through February 20, 2024 the period for interested persons to submit comments to its request for information on whether to amend the accessibility requirements for transportation facilities under the Americans with Disabilities Act of 1990 (ADA) currently contained in appendix A to DOT's regulations governing transportation services for individuals with disabilities.
Qualification of Drivers; Exemption Applications; Epilepsy and Seizure Disorders
FMCSA announces its decision to exempt 17 individuals from the requirement in the Federal Motor Carrier Safety Regulations (FMCSRs) that interstate commercial motor vehicle (CMV) drivers have ``no established medical history or clinical diagnosis of epilepsy or any other condition which is likely to cause loss of consciousness or any loss of ability to control a CMV.'' The exemptions enable these individuals who have had one or more seizures and are taking anti- seizure medication to operate CMVs in interstate commerce.
Qualification of Drivers; Exemption Applications; Epilepsy and Seizure Disorders
FMCSA announces receipt of applications from 12 individuals for an exemption from the prohibition in the Federal Motor Carrier Safety Regulations (FMCSRs) against persons with a clinical diagnosis of epilepsy or any other condition that is likely to cause a loss of consciousness or any loss of ability to control a commercial motor vehicle (CMV) to drive in interstate commerce. If granted, the exemptions would enable these individuals who have had one or more seizures and are taking anti-seizure medication to operate CMVs in interstate commerce.
California and Washington Meal and Rest Break Rules; Petitions for Waiver of Preemption Determinations
FMCSA requests comments on petitions requesting waivers of the Agency's December 21, 2018 and January 13, 2020 decisions preempting the State of California's Meal and Rest Break (MRB) rules for certain drivers of property- and passenger-carrying commercial motor vehicles (CMVs) and its November 17, 2020 decision preempting the State of Washington's MRB rules for certain drivers of property-carrying CMVs. Waiver petitions were filed by the International Brotherhood of Teamsters; the Truck Safety Coalition, Citizens for Reliable and Safe Highways and Parents Against Tired Truckers; William B. Trescott; and the State of California.
Qualification of Drivers; Exemption Applications; Epilepsy and Seizure Disorders
FMCSA announces its decision to renew exemptions for three individuals from the requirement in the Federal Motor Carrier Safety Regulations (FMCSRs) that interstate commercial motor vehicle (CMV) drivers have ``no established medical history or clinical diagnosis of epilepsy or any other condition which is likely to cause loss of consciousness or any loss of ability to control a CMV.'' The exemptions enable these individuals who have had one or more seizures and are taking anti-seizure medication to continue to operate CMVs in interstate commerce.
Qualification of Drivers; Exemption Applications; Epilepsy and Seizure Disorders
FMCSA announces its decision to deny applications from 26 individuals who requested an exemption from the Federal Motor Carrier Safety Regulations (FMCSRs) prohibiting persons with a clinical diagnosis of epilepsy or any other condition that is likely to cause a loss of consciousness or any loss of ability to operate a commercial motor vehicle (CMV) from operating CMVs in interstate commerce.
Proposed Agency Information Collection Activities; Comment Request
Under the Paperwork Reduction Act of 1995 (PRA) and its implementing regulations, FRA seeks approval of the Information Collection Request (ICR) summarized below. Before submitting this ICR to the Office of Management and Budget (OMB) for approval, FRA is soliciting public comment on specific aspects of the activities identified in the ICR.
Proposed Agency Information Collection Activities; Comment Request
Under the Paperwork Reduction Act of 1995 (PRA) and its implementing regulations, FRA seeks approval of the Information Collection Request (ICR) summarized below. Before submitting this ICR to the Office of Management and Budget (OMB) for approval, FRA is soliciting public comment on specific aspects of the activities identified in the ICR.
National Emergency Medical Services Advisory Council; Notice of Public Meeting
This notice announces a meeting of the National Emergency Medical Services Advisory Council (NEMSAC).
FMCSA Registration System Modernization
FMCSA announces a public meeting to engage stakeholders, which includes motor carriers, brokers, freight forwarders, insurance companies, financial institutions, process agents, blanket companies, and third-party service providers; to get their perspective on improving the registration experience with FMCSA.
Airworthiness Directives; The Boeing Company Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for all The Boeing Company Model 787-8, 787-9, and 787-10 airplanes. This proposed AD was prompted by a report indicating that the oxygen supply tubing can become kinked when certain passenger service unit (PSU) oxygen panel assemblies are installed in the forward-most position of a center stow bin. This proposed AD would require a one- time inspection of the affected PSU oxygen panel assemblies and applicable on-condition actions. This proposed AD would also prohibit the installation of affected parts. The FAA is proposing this AD to address the unsafe condition on these products.
Notice of Request To Release Airport Property for Land Disposal
The FAA proposes to rule and invites public comment on the release of land at the St. Louis Lambert International Airport (STL), St. Louis, Missouri.
Amendment of Class D and Class E Airspace; Wilmington, DE
A final rule was published in the Federal Register on December 7, 2023, amending Class D airspace and Class E surface airspace for New Castle Airport, Wilmington, DE. This action corrects the Class E legal description for New Castle Airport.
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-700-1A10 and BD-700-1A11 airplanes. This proposed AD was prompted by the discovery that existing maintenance tasks do not detect the potential failure of the passenger door detent mechanism because there is no procedure for inspecting the passenger door locking mechanism. This proposed AD would require revising the maintenance or inspection program, as applicable, to require use of a certain aircraft maintenance manual (AMM) task during accomplishment of a specified maintenance check. The FAA is proposing this AD to address the unsafe condition on these products.
Agency Information Collection Activities: Requests for Comments; Clearance of Renewed Approval of Information Collection: Notice of Proposed Outdoor Laser Operation(s)
In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew an information collection. The collection involves the gathering of information necessary for the FAA to ensure proposed outdoor laser operations will not interfere with air traffic operations.
Establishment of Class E Airspace; Desmet, SD
This action proposes to establish Class E airspace at Desmet, SD. The FAA is proposing this action due to the development of new public instrument procedures and to support instrument flight rule (IFR) operations.
Amendment of Class D and Class E Airspace and Revocation of Class E Airspace; Clarksburg, WV
This action proposes to amend the Class D and Class E airspace and revoke Class E airspace at Clarksburg, WV. The FAA is proposing this action as the result of a biennial airspace review. This action will bring the airspace into compliance with FAA orders to support instrument flight rule (IFR) operations.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.