Department of Transportation September 8, 2022 – Federal Register Recent Federal Regulation Documents
Results 1 - 26 of 26
Airworthiness Directives; Airbus SAS Airplanes
The FAA is superseding Emergency Airworthiness Directive (AD) 2022-18-51, which applied to all Airbus SAS Model A330-841 and -941 airplanes. Emergency AD 2022-18-51 required revising the existing airplane flight manual (AFM) to incorporate additional limitations prohibiting takeoff for certain airplane configurations; specified airplane dispatch restrictions using certain provisions of the A330 master minimum equipment list (MMEL) or amending the existing FAA- approved operator's minimum equipment list (MEL); and required obtaining and accomplishing instructions following certain maintenance messages. Since the FAA issued Emergency AD 2022-18-51, additional instructions and maintenance procedures have been developed to address failures of the high pressure valve (HPV). This AD continues to require the actions specified in Emergency AD 2022-18-51, and also requires maintenance actions, including an HPV seal integrity test, repetitive replacement of the HPV clips, revision of the existing AFM, and implementation of updates to the FAA-approved operator's MEL, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Agency Information Collection Activities; Renewal of an Approved Information Collection: Transportation of Hazardous Materials; Highway Routing
In accordance with the Paperwork Reduction Act of 1995, FMCSA announces its plan to submit the Information Collection Request (ICR) described below to the Office of Management and Budget (OMB) for its review and approval and invites public comment. FMCSA requests approval to renew an ICR titled, ``Transportation of Hazardous Materials, Highway Routing.'' The information reported by States and Indian tribes is necessary to identify designated/restricted routes and restrictions or limitations affecting how motor carriers may transport certain hazardous materials on highways, including dates that such routes were established and information on subsequent changes or new hazardous materials routing designations.
Risk Reduction Program
In response to issues raised by a petition for reconsideration of the Risk Reduction Program (RRP) final rule, FRA is issuing this NPRM to solicit information to help determine whether FRA should retain or remove a provision in the RRP final rule clarifying that contractors who perform a significant portion of a railroad's operations are considered the railroad's directly affected employees for purposes of the RRP rule.
Agency Information Collection Activities; Renewal of an Approved Information Collection: 391.41 CMV Driver Medication Form
In accordance with the Paperwork Reduction Act of 1995, FMCSA announces its plan to submit the renewal Information Collection Request (ICR) described below to the Office of Management and Budget (OMB) for review and approval and invites public comment. FMCSA requests approval to renew an ICR titled, ``391.41 CMV Driver Medication Form.'' This Information Collection (IC) is voluntary and may be utilized by Medical Examiners (MEs) responsible for issuing Medical Examiner's Certificates (MECs) to commercial motor vehicle (CMV) drivers. MEs that choose to use this IC do so to communicate with treating healthcare professionals who are responsible for prescribing certain medications, so that the ME fully understands the reasons the medications have been prescribed. The information obtained by the ME when utilizing this IC assists the ME in determining if the driver is medically qualified and ensures that there are no disqualifying medical conditions or underlying medical conditions and prescribed medications that could adversely affect their safe driving ability or cause incapacitation constituting a risk to the public.
Airworthiness Directives; Airbus SAS Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Airbus SAS Model A350-941 airplanes. This AD was prompted by a report indicating that the inflatable free aisle restrictor (IFAR) on certain single lane slide-rafts demonstrated inconsistent release behavior in aft wind conditions. This AD requires replacing an affected part with a serviceable part, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. This AD also prohibits the installation of affected parts. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; The Boeing Company Airplanes
The FAA proposes to supersede Airworthiness Directive (AD) 2021-07-09, which applies to all The Boeing Company Model 747-100, 747- 100B, 747-100B SUD, 747-200B, 747-200C, 747-200F, 747-300, 747-400, 747-400D, 747-400F, 747SR, and 747SP series airplanes. AD 2021-07-09 requires repetitively inspecting all trim air diffuser ducts or sidewall riser duct assemblies (collectively referred to as TADDs) for damage, including repetitive structural inspections of the center fuel tanks for damage, and applicable on-condition actions. Since the FAA issued AD 2021-07-09, the agency has determined that the existing requirements do not adequately address the unsafe condition. This proposed AD would continue to require repetitive inspections of the TADDs for damage with revised compliance times, and repair if applicable. This proposed AD would also require repetitive replacement of the TADDs and would remove the structural inspections of the center fuel tanks. This proposed AD would also prohibit the installation of affected parts. The FAA is proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; The Boeing Company Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for all The Boeing Company Model 747-100, 747-100B, 747-100B SUD, 747- 200B, 747-200C, 747-200F, 747-300, 747-400, 747-400D, 747-400F, 747SR, and 747SP series airplanes. This proposed AD was prompted by reports that high temperature composite trim air diffuser ducts (TADD) showed composite degradation and signs of hot air leakage. This proposed AD would require a one-time low frequency eddy current (LFEC) inspection of certain center tank upper skin panels on the right and left side for any structural damage due to heat exposure, and repair if necessary. The FAA is proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; The Boeing Company Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for all The Boeing Company Model 737-100, -200, -200C, -300, -400, and -500 series airplanes. This proposed AD was prompted by a report indicating that a crack was found in one of the holes of the wing rear spar lower chord at the main landing gear (MLG) aft fitting at a certain wing buttock line (WBL). This proposed AD would require repetitive open hole high frequency eddy current (HFEC) inspections or surface HFEC and ultrasonic (UT) inspections for cracking of the wing rear spar lower chord at the MLG aft fitting at a certain WBL, and applicable on-condition actions. The FAA is proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; Gulfstream Aerospace Corporation Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for certain Gulfstream Aerospace Corporation Model GVII-G500 and GVII- G600 airplanes. This proposed AD was prompted by reports of two landing incidents in which the alpha limiter engaged in the landing flare in unstable air, resulting in high rate of descent landings and damage to the airplanes. This proposed AD would require updating the flight control computer (FCC) software. The FAA is proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus Helicopters
The FAA is adopting a new airworthiness directive (AD) for all Airbus Helicopters Model AS332C, AS332C1, AS332L, and AS332L1 helicopters. This AD was prompted by review of maintenance instructions that showed conflicting methods of recording torque cycles for certain parts. This AD requires recalculating the torque cycles of certain parts and updating log cards; removing certain other parts from service; and applying an operational restriction on certain parts, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. This AD also requires incorporating the re-calculated life limits into existing maintenance records. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; The Boeing Company Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for certain The Boeing Company Model 747-8 and -8F series airplanes. This proposed AD was prompted by reports of cracking in stringers and splice fittings located at stringer splices at multiple body stations. This proposed AD would require an inspection of each free flange of the stringers at the stringer splice for the presence of radius fillers at fastener locations, an inspection for cracking of the stringers and stringer splice fittings at certain stringer splice locations, and applicable on-condition actions. The FAA is proposing this AD to address the unsafe condition on these products.
Airspace Designations; Incorporation by Reference
This action amends 14 CFR part 71 relating to airspace designations to reflect the approval by the Director of the Federal Register of the incorporation by reference of FAA Order JO 7400.11G, Airspace Designations and Reporting Points. This action also explains the procedures the FAA will use to amend the listings of Class A, B, C, D, and E airspace areas; air traffic service routes; and reporting points incorporated by reference.
Amendment and Revocation of Area Navigation (RNAV) Routes; Southeastern and Northeastern United States
This action amends Area Navigation (RNAV) route Q-81 to realign a portion of the route to improve traffic flows, and to remove Canadian RNAV route Q-947 at the request of NavCanada. These changes support the Northeast Corridor Atlantic Coast Route Project.
Removal of VOR Federal Airways in the Eastern United States
This action removes VHF Omnidirectional Range (VOR) Federal Airways V-31, V-447, and V-475 in support of the FAA's VOR Minimum Operation Network (MON) Program.
Amendment and Removal of VOR Federal Airways in the Eastern United States
This action amends 4 VHF Omnidirectional Range (VOR) Federal Airways, (V-7, V-9, V-106, and V-214); and removes 5 VOR Federal Airways, (V-58, V-130, V-149, V-445, V-451) in support of the FAA's VOR Minimum Operation Network (MON) project.
Amendment and Revocation of Air Traffic Service (ATS) Routes; Eastern United States
This action amends four jet routes and removes eight jet routes in the eastern United States. This action is associated with the Northeast Corridor Atlantic Coast Route Project and supports the VHF Omnidirectional Range (VOR) Minimum Operational Network (MON) to improve the efficiency of the National Airspace System (NAS) and reduce dependency on ground-based navigational systems.
Amendment of United States Area Navigation (RNAV) Route T-232; Fairbanks, AK
This action corrects a final rule published by the FAA in the Federal Register on August 29, 2022, that amends United States Area Navigation (RNAV) route T-232 in the vicinity of Fairbanks, AK, in support of a large and comprehensive T-route modernization project for the state of Alaska. The final rule identified the IMARE, AK, route point as a waypoint (WP), in error. This action makes an editorial correction to the references of the IMARE, AK, WP to change it to be reflected as a Fix and match the FAA's aeronautical database information.
Airworthiness Directives; Airbus SAS Airplanes
The FAA is superseding Airworthiness Directive (AD) 2020-22- 03, which applied to all Airbus SAS Model A330-200, -200 Freighter, and -300 series airplanes. AD 2020-22-03 required revising the existing airplane flight manual (AFM) to incorporate procedures to be applied if an engine bleed over-temperature occurs when the associated engine bleed valve is jammed open, and provided for the optional embodiment of updated flight warning computer (FWC) software, which terminated the AFM revision. This AD was prompted by the development of new maintenance actions and software related to over-temperature failure conditions. This AD continues to require the actions specified in AD 2020-22-03, requires accomplishing the new maintenance tasks and corrective actions, and mandates embodiment of the updated FWC software for certain airplanes, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. This AD also prohibits the installation of affected FWC software. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus SAS Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Airbus SAS Model A318, A319, A320, and A321 series airplanes. This AD was prompted by unclear and incomplete placard instructions for the doghouse door lock. This AD requires installing improved handling instruction placards on affected doghouses and re-identifying the doghouses, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. This AD also prohibits the installation of affected doghouses under certain conditions. The FAA is issuing this AD to address the unsafe condition on these products.
Noise Compatibility Program for Laredo International Airport, Webb County, Texas
The Federal Aviation Administration (FAA) announces its determination that the noise exposure map submitted by Laredo International Airport is in compliance with applicable statutory and regulatory requirements.
Pipeline Safety: Information Collection Activities
In compliance with the Paperwork Reduction Act of 1995, this notice announces that the information collection requests abstracted below are being forwarded to the Office of Management and Budget (OMB) for review and comment. A Federal Register notice with a 60-day comment period soliciting comments on the information collections was published on June 16, 2022.
Fees for the Unified Carrier Registration Plan and Agreement
The Federal Motor Carrier Safety Administration is correcting a final rule that published September 1, 2022, in the Federal Register. The document amended the regulations for the annual registration fees States collect from motor carriers, motor private carriers of property, brokers, freight forwarders, and leasing companies for the Unified Carrier Registration (UCR) Plan and Agreement for the 2023 registration year and subsequent registration years.
Noise Exposure Map Notice: San Diego County Regional Airport Authority for San Diego International Airport
The Federal Aviation Administration (FAA) announces its determination that the noise exposure maps submitted by the San Diego County Regional Airport Authority for San Diego International Airport complies with applicable statutory and regulatory requirements, refer to the supplementary information for details. Further, in conjunction with the noise exposure maps, FAA is reviewing the proposed noise compatibility program for the San Diego International Airport, which the FAA will approve or disapprove on or before February 28, 2023. This notice also announces the availability of this noise compatibility program for public review and comment.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.