Department of Transportation December 23, 2021 – Federal Register Recent Federal Regulation Documents

The FAA is adopting a new airworthiness directive (AD) for certain Bell Textron Canada Limited Model 206, 206A, 206A-1, 206B, 206B-1, 206L, 206L-1, 206L-3, and 206L-4 helicopters. This AD was prompted by reports of cracked or missing nuts on the tail rotor drive shaft (TRDS) disc pack (Thomas) couplings. This AD requires removing certain nuts from service, installing newly designed nuts, and applying a specific torque and a torque stripe to each newly installed nut. This AD then requires, after the installation of each newly designed nut, inspecting the torque and, depending on the inspection results, either applying a torque stripe or performing further inspections and removing certain parts from service. Finally, this AD prohibits installing any affected nut on any TRDS Thomas coupling. The FAA is issuing this AD to address the unsafe condition on these products.

The FAA is adopting a new airworthiness directive (AD) for all DG Flugzeugbau GmbH Model DG-500MB and DG-1000M gliders with a Solo Kleinmotoren GmbH Solo Model 2625 02i engine installed. This AD was prompted by mandatory continuing airworthiness information (MCAI) issued by the aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as an error in the engine control unit (ECU) software. This AD requires updating the ECU software. The FAA is issuing this AD to address the unsafe condition on these products.

The FAA is adopting a new airworthiness directive (AD) for all Rolls-Royce Deutschland Ltd & Co KG (RRD) Trent 1000-A2, Trent 1000- AE2, Trent 1000-C2, Trent 1000-CE2, Trent 1000-D2, Trent 1000-E2, Trent 1000-G2, Trent 1000-H2, Trent 1000-J2, Trent 1000-K2, and Trent 1000-L2 model turbofan engines. This AD was prompted by the manufacturer revising the engine Time Limits Manual (TLM) life limits of certain critical rotating parts, updating direct accumulation counting (DAC) data files, and updating certain maintenance tasks. This AD requires revision of the engine TLM life limits of certain critical rotating parts and DAC data files, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.

The FAA proposes to adopt a new airworthiness directive (AD) for certain Bell Textron Canada Limited Model 429 helicopters. This proposed AD was prompted by reports of failed rivets between the tailboom skin and the tail rotor (TR) gearbox support assembly. This proposed AD would require visually inspecting the external surface of the TR gearbox support assembly, borescope inspecting or visually inspecting the inside of the tailboom for certain conditions, and performing a tactile inspection. Depending on the results of the inspections, this proposed AD would require removing certain rivets from service or repairing gaps in accordance with FAA-approved methods. This proposed AD would also require repeating these inspections within certain intervals. The FAA is proposing this AD to address the unsafe condition on these products.

The FAA proposes to supersede Airworthiness Directive (AD) 2017-18-10, which applies to certain Diamond Aircraft Industries GmbH (DAI) Model DA 42, DA 42 M-NG, and DA 42 NG airplanes. AD 2017-18-10 requires modifying the flap control system, repetitively inspecting the flap bell crank, and replacing the flap bell crank as necessary. Since the FAA issued AD 2017-18-10, the European Union Aviation Safety Agency (EASA) superseded its mandatory continuing airworthiness information (MCAI) to correct an unsafe condition on these products. This proposed AD would retain the actions required by AD 2017-18-10, expand the applicability, and prohibit the installation of certain flap bell cranks. The FAA is proposing this AD to address the unsafe condition on these products.

The FAA is adopting a new airworthiness directive (AD) for all Airbus SAS Model A350-941 and -1041 airplanes. This AD was prompted by reports of slat transmission jams caused by frozen slat geared rotary actuators (SGRAs) at slat 5 track 12. This AD requires repetitive water drainage and plug cleaning of the left- and right-hand SGRAs having a certain part number installed on slat 5 track 12 with certain functional item numbers, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.