Department of Transportation 2020 – Federal Register Recent Federal Regulation Documents

This action removes Class E airspace extending upward from 700 feet above the surface at Schuylkill County/Joe Zerbey Airport, Pottsville, PA due to the extension of runway 11. This action also updates the geographic coordinates of the airport, and Schuylkill Medical Center Heliport (formerly Pottsville Hospital). Controlled airspace is necessary for the safety and management of instrument flight rules (IFR) operations in the area.

This action modifies Class E airspace by adding an area, designated as an extension to a Class D or Class E surface area. This action also implements several administrative amendments to the airspace legal descriptions.

The FAA is revising an earlier proposal for certain Piper Aircraft, Inc. (Piper) Models PA-28-140, PA-28-150, PA-28-160, PA-28- 180, PA-28-235, PA-32-260, and PA-32-300 airplanes. This action revises the notice of proposed rulemaking (NPRM) by including a revision to the manufacturer's service information, including an additional inspection method, and removing the requirement to install the access panel. The FAA is proposing this airworthiness directive (AD) to address the unsafe condition on these products. Since the actions in the revised service information would impose an additional burden over those in the NPRM, the FAA is reopening the comment period to allow the public the chance to comment on these changes.

The FAA is adopting a new airworthiness directive (AD) for certain Airbus SAS Model A320-214, -216, -231, -232, -233, -251N, and - 271N airplanes. This AD was prompted by a report that following the installation of a second cargo fire extinguishing bottle, insufficient clearance between the cargo compartment fire extinguishing pipes was found. This AD requires inspection and modification of the cargo compartment fire extinguishing pipes, and on-condition actions if necessary, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.

The FAA proposes to supersede Airworthiness Directive (AD) 2019-23-03, which applies to certain Dassault Aviation Model FALCON 900EX airplanes. AD 2019-23-03 requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive maintenance requirements and/or airworthiness limitations. Since the FAA issued AD 2019-23-03, the FAA has determined that new or more restrictive airworthiness limitations are necessary. This proposed AD would continue to require those maintenance or inspection program revisions, and would also require revising the existing maintenance or inspection program, as applicable, to incorporate additional new or more restrictive airworthiness limitations, as specified in a European Union Aviation Safety Agency (EASA) AD, which will be incorporated by reference. The FAA is proposing this AD to address the unsafe condition on these products.

The Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to grant waivers of the U.S.-build requirements of the coastwise trade laws to allow the carriage of no more than twelve passengers for hire on vessels, which are three years old or more. A request for such a waiver has been received by MARAD. The vessel, and a brief description of the proposed service, is listed below.

The Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to grant waivers of the U.S.-build requirements of the coastwise trade laws to allow the carriage of no more than twelve passengers for hire on vessels, which are three years old or more. A request for such a waiver has been received by MARAD. The vessel, and a brief description of the proposed service, is listed below.

The Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to grant waivers of the U.S.-build requirements of the coastwise trade laws to allow the carriage of no more than twelve passengers for hire on vessels, which are three years old or more. A request for such a waiver has been received by MARAD. The vessel, and a brief description of the proposed service, is listed below.

In accordance with the Paperwork Reduction Act of 1995, FMCSA announces its plan to submit the Information Collection Request (ICR) described below to the Office of Management and Budget (OMB) for its review and approval and invites public comment. FMCSA requests approval to renew the previously approved ICR titled, ``Annual Report of Class I and Class II Motor Carriers of Property,'' OMB Control No. 2126-0032. This ICR is necessary to ensure that motor carriers comply with FMCSA's financial and operating statistics requirements at chapter III of title 49 CFR part 369 titled, ``Reports of Motor Carriers.''

PHMSA is requesting nominations for individuals to serve on the Gas Pipeline Advisory Committee (GPAC), also known as the Technical Pipeline Safety Standards Committee, and the Liquid Pipeline Advisory Committee (LPAC), also known as the Technical Hazardous Liquid Pipeline Safety Standards Committee. Each committee is composed of 15 members appointed by the Secretary of Transportation (the Secretary).

In accordance with the Paperwork Reduction Act of 1995, PHMSA invites comments on an Office of Management and Budget (OMB) control number pertaining to hazardous materials transportation. This notice follows the publication of a PHMSA final rule titled ``Hazardous Materials: Liquefied Natural Gas by Rail'' [HM-264, 85 FR 44994] authorizing the transportation of liquefied natural gas by rail. PHMSA intends to request a renewal with change of currently approved OMB control number 2137-0612, ``Hazardous Materials Security Plans.''

This notice announces actions taken by FHWA and other Federal agencies that are final. The actions relate to the Environmental Assessment (EA) and Finding of No Significant Impact (FONSI) for the Verde Connect, Cornville Road to State Route (SR) 260 project in Yavapai County, AZ. The actions grant licenses, permits, and approvals for the project.

This action amends Class E surface airspace, and Class E airspace extending upward from 700 feet above the surface at Floyd Bennett Memorial Airport, (previously Warren County Airport), Glens Falls, NY due to the decommissioning of the Glens Falls very high frequency omnidirectional range collocated tactical air navigation (VORTAC) system, and cancellation of associated approaches. Controlled airspace is necessary for the safety and management of instrument flight rules (IFR) operations in the area. This action also updates the airport's name.

This action removes Class E airspace area designated as an extension to a Class D surface area for Cecil Airport, Jacksonville, FL, as the Cecil very high frequency omnidirectional range (VOR) has been decommissioned, and the VOR approach cancelled. This action also amends Class D and E airspace by updating the names and geographic coordinates of several airports located in and around Jacksonville, FL, and corrects the line between Cecil Airport and Whitehouse NOLF. Controlled airspace is necessary for the safety and management of instrument flight rules (IFR) operations in the area. This action also makes an editorial change replacing the term Airport/Facility Directory with the term Chart Supplement in the legal descriptions of associated Class D airspace.

The FAA proposes to adopt a new airworthiness directive (AD) for certain Airbus SAS Model A330-200 and A330-300 series airplanes, and all Model A340-200 and A340-300 series airplanes. This proposed AD was prompted by reports of hydraulic system failure due to fatigue failure of the screws attaching the manual valve to the ground service manifold (GSM). This proposed AD would require, for certain GSMs, repetitive replacement of the hydraulic system GSM manual valve attachment screws having certain part numbers; and, for certain other GSMs with certain screws installed, replacement of those screws, as specified in a European Union Aviation Safety Agency (EASA) AD, which will be incorporated by reference. The FAA is proposing this AD to address the unsafe condition on these products.

This notice contains a summary of a petition seeking relief from specified requirements of Federal Aviation Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, the FAA's exemption process. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.

The Federal Aviation Administration (FAA) is issuing this notice to advise the public that it has published a Record of Decision (ROD) signed by the FAA for the Final Supplement to the Final Environmental Impact Statement (EIS) for the proposed Runway Extension Project at Gnoss Field Airport (DVO), Novato, Marin County, California.

The FAA is adopting a new airworthiness directive (AD) for certain Airbus SAS Model A350-941 airplanes. This AD was prompted by reports of improperly locked diagonal struts located in a certain section of the fuselage; the teeth of the lock washers were incorrectly engaged, which could lead to a loss of tightening torque of an affected strut. This AD requires inspecting the diagonal strut for correct installation and for correct locking of the lock washers, and corrective actions if necessary, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.

The FAA is superseding Airworthiness Directive (AD) 2015-13- 06, which applied to certain The Boeing Company Model 747-400 and 747- 400F series airplanes. AD 2015-13-06 required repetitive inspections of the longeron extension fittings for cracking; repetitive high frequency eddy current (HFEC) inspections of any modified, repaired, or replaced longeron extension fitting for cracking; and applicable on-condition actions. This AD retains the requirements of AD 2015-13-06. This AD also requires, for certain additional airplanes, repetitive inspections of the longeron extension fittings for cracking and repair if necessary. This AD was prompted by the FAA's determination that additional airplanes are affected by the identified unsafe condition. The FAA is issuing this AD to address the unsafe condition on these products.

The FAA is adopting a new airworthiness directive (AD) for all Airbus Helicopters Model EC225LP helicopters. This AD was prompted by a mechanical deformation found on the protective cover of the ``SHEAR'' control pushbutton installed on a copilot collective stick. This AD requires modification of the helicopter by replacing the protective cover and re-identifying the part number of the pilot and copilot collective sticks. The FAA is issuing this AD to address the unsafe condition on these products.

The FAA is adopting a new airworthiness directive (AD) for Pacific Aerospace Limited Model 750XL airplanes. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as ineffective firewall sealing for firewall wiring penetrations. The FAA is issuing this AD to require actions to address the unsafe condition on these products.

Notice is being given that the FAA is considering a request from the Town of Old Town, ME to change the land use from Aeronautical to Non Aeronautical for 31.2 acres of airport land. The land use change will allow the development of a solar farm on land that is not needed for aeronautical purposes. The revenue generated by the lease of airport land for the solar farm will be placed into the airport's operation and maintenance fund.

In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew an information collection. The collection involves extracting flight data such as aircraft, routing speed, etc. from domestic and international flights. FAA Form 7233-1, Flight Plan: Domestic flight plan information is used to govern the flight of aircraft for the protection and identification of aircraft and property and persons on the ground. The information is used by air traffic controllers, search and rescue (SAR) personnel, flight standards inspectors, accident investigators, military, law enforcement, and the Department of Homeland Security. FAA Form 7233-4, International Flight Plan: International flight plan information is used for the same purposes as domestic flight plans; in addition, it is used by Customs and international controllers.

The FAA proposes to adopt a new airworthiness directive (AD) for certain Textron Aviation Inc. (Textron) (type certificate previously held by Beechcraft Corporation) Models F90, 65-90, 65-A90, B90, C90, H90 (T-44A), E90, 65-A90-1 (JU-21A, U-21A, RU-21A, RU-21D, U- 21G, RU-21H), 65-A90-2 (RU-21B), 65-A90-3 (RU-21C), 65-A90-4 (RU-21E, RU-21H), 99, 99A, 99A (FACH), A99, A99A, B99, C99, 100, A100 (U-21F), and B100 airplanes. This proposed AD was prompted by reports of fatigue cracks in the lower forward wing fitting. This proposed AD would require a one-time inspection for the presence of washer part number (P/N) 90-380058-1 on the left-hand (LH) and right-hand (RH) lower forward wing bolt and, if applicable, removing washer P/N 90-380058-1, inspecting the wing fitting, bolt, and nut, replacing the wing fitting if it is cracked, and replacing the washer with washer P/N 90-380019-1. The FAA is proposing this AD to address the unsafe condition on these products.