Department of Transportation 2016 – Federal Register Recent Federal Regulation Documents

On October 7, 2010, the FAA published in the Federal Register a notice of proposed rulemaking (NPRM) to require certificate holders to establish a safety management system (SMS) for the entire airfield environment, including movement and non-movement areas, to improve safety at airports hosting air carrier operations. After reviewing the comments received and conducting further internal analysis, the FAA is amending that proposal. The FAA now proposes to require an SMS only for a certificated airport classified as a small, medium, or large hub airport in the National Plan of Integrated Airport Systems; serving international air traffic; or having more than 100,000 total annual operations. The FAA is also proposing changes that would extend the implementation period from 18 to 24 months; require submission of an implementation plan within 12 months instead of 6 months of the effective date of the final rule; modify the training requirements; ensure consistency among various FAA SMS initiatives, and reduce the implementation burden.

NHTSA announces a meeting of the FICEMS to be held in the Washington, DC area. This notice announces the date, time, and location of the meeting, which will be open to the public. Pre-registration is encouraged.

FMCSA announces receipt of applications from 18 individuals for exemption from the vision requirement in the Federal Motor Carrier Safety Regulations. They are unable to meet the vision requirement in one eye for various reasons. The exemptions will enable these individuals to operate commercial motor vehicles (CMVs) in interstate commerce without meeting the prescribed vision requirement in one eye. If granted, the exemptions would enable these individuals to qualify as drivers of commercial motor vehicles (CMVs) in interstate commerce.

FMCSA confirms its decision to exempt 55 individuals from its rule prohibiting persons with insulin-treated diabetes mellitus (ITDM) from operating commercial motor vehicles (CMVs) in interstate commerce. The exemptions enable these individuals to operate CMVs in interstate commerce.

On January 23, 2015, FMCSA announced the results of the Agency's study on the feasibility of using a motor carrier's role in crashes in the assessment of the company's safety. This study assessed: Whether police accident reports (PARs) provide sufficient, consistent, and reliable information to support crash-weighting determinations; whether a crash-weighting determination process would offer an even stronger predictor of crash risk than overall crash involvement and how crash weighting would be implemented in the Agency's Safety Measurement System (SMS); and how FMCSA might manage a process for making crash- weighting determinations, including the acceptance of public input. Based on the feedback received in response to the January 23, 2015, Federal Register notice, FMCSA announced in a separate notice elsewhere in today's Federal Register that it conducted additional analysis in response to comments received. However, in this notice, FMCSA is proposing to develop and implement a demonstration program to determine the efficacy of a program to conduct preventability determinations on certain types of crashes that generally are less complex. This notice provides FMCSA's proposal for a demonstration program and seeks additional comment.

This notice contains a summary of a petition seeking relief from specified requirements of Title 14 of the Code of Federal Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, the FAA's exemption process. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.

The application for a determination of preemption is dismissed, and this docket is closed, because the City of Pittsburgh, Pennsylvania's permit and permit fee requirements are not being applied or enforced.

We propose to adopt a new airworthiness directive (AD) for certain The Boeing Company Model 737-100, -200, and -200C series airplanes. This proposed AD is intended to complete certain mandated programs intended to support the airplane reaching its limit of validity (LOV) of the engineering data that support the established structural maintenance program. This proposed AD would require repetitive detailed, high frequency eddy current (HFEC), and ultrasonic inspections of the center section rear spar upper clevis lugs and horizontal stabilizer rear spar upper lugs, as applicable, for any cracking, and related investigative and corrective actions if necessary. For certain airplanes, this proposed AD would require replacement of the center section rear spar upper chord with a new part and a serviceable center section assembly. This proposed AD would also require repetitive HFEC and fluorescent dye penetrant inspections of the center section for cracking of the front and rear spar upper clevis lugs or horizontal stabilizer front and rear spar upper lugs, and related investigative and corrective actions if necessary. We are proposing this AD to detect and correct cracking in the rear spar upper clevis lugs of the center section, and in the rear spar upper lugs of the horizontal stabilizer which could result in the loss of structural integrity and controllability of the airplane.

We are superseding Airworthiness Directive (AD) 2015-10-03 for certain Airbus Model A330-200 and -300 series airplanes, and Model A340-200 and -300 series airplanes. AD 2015-10-03 required a detailed inspection for visible chrome of each affected main landing gear (MLG) sidestay upper cardan pin, associated nuts, and retainer assembly; pin replacement if needed; measurement of cardan pin clearance dimensions (gap check); corrective actions if necessary; and a report of all findings. This new AD requires a detailed inspection of the upper cardan pin and nut threads for any corrosion, pitting, or thread damage, and if necessary, replacement of the cardan pin and nut. This new AD also revises the applicability to include additional airplane models. This AD was prompted by a report that an MLG sidestay upper cardan pin migration event had been caused by corrosion due to lack of jointing compound and inadequate sealant application during the MLG installation. We are issuing this AD to detect and correct migration of the sidestay upper cardan pin, which could result in disconnection of the sidestay upper arm from the airplane structure, and could result in a landing gear collapse and consequent damage to the airplane and injury to occupants.

We are adopting a new airworthiness directive (AD) for certain Dassault Aviation Model FALCON 7X airplanes. This AD was prompted by a report of improperly drilled bores, located on upper and lower stiffener joints to the Web at a certain frame. This AD requires a one- time inspection of the bores, and repair if necessary. We are issuing this AD to detect and correct an unsatisfactory bore that can adversely affect the structural integrity of the airplane.

We are revising an earlier proposed airworthiness directive (AD) for certain Saab AB, Saab Aeronautics Model 340A (SAAB/SF340A) and SAAB 340B airplanes. The NPRM proposed to supersede AD 2012-24-06. AD 2012-24-06 currently requires replacing the stall warning computer (SWC) with a new SWC that provides an artificial stall warning in icing conditions, and modifying the airplane for the replacement of the SWC. The NPRM was prompted by a determination that airplanes with certain modifications were excluded from the applicability in AD 2012-24-06, and are affected by the identified unsafe condition; and the SWC required by AD 2012-24-06 contained erroneous logic. This action revises the NPRM by reducing the compliance time for replacing the SWCs. We are proposing this supplemental NPRM (SNPRM) to prevent natural stall events during operation in icing conditions, which could result in loss of control of the airplane. Since this compliance time reduction imposes an additional burden to operators, we are reopening the comment period to allow the public the chance to comment on these proposed changes.

As authorized by 46 U.S.C. 12121, the Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to grant waivers of the U.S.-build requirement of the coastwise laws under certain circumstances. A request for such a waiver has been received by MARAD. The vessel, and a brief description of the proposed service, is listed below.

As authorized by 46 U.S.C. 12121, the Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to grant waivers of the U.S.-build requirement of the coastwise laws under certain circumstances. A request for such a waiver has been received by MARAD. The vessel, and a brief description of the proposed service, is listed below.

As authorized by 46 U.S.C. 12121, the Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to grant waivers of the U.S.-build requirement of the coastwise laws under certain circumstances. A request for such a waiver has been received by MARAD. The vessel, and a brief description of the proposed service, is listed below.

As authorized by 46 U.S.C. 12121, the Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to grant waivers of the U.S.-build requirement of the coastwise laws under certain circumstances. A request for such a waiver has been received by MARAD. The vessel, and a brief description of the proposed service, is listed below.

In accordance with the requirements of 49 U.S.C. 5117(c), PHMSA is publishing the following list of special permit applications that have been in process for 180 days or more. The reason(s) for delay and the expected completion date for action on each application is provided in association with each identified application.

This rule establishes, amends, suspends, or removes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures (ODPs) for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.

As authorized by 46 U.S.C. 12121, the Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to grant waivers of the U.S.-build requirement of the coastwise laws under certain circumstances. A request for such a waiver has been received by MARAD. The vessel, and a brief description of the proposed service, is listed below.

In accordance with the Paperwork Reduction Act of 1995, FMCSA announces its plan to submit the Information Collection Request (ICR) described below to the Office of Management and Budget (OMB) for its review and approval and invites public comment on the approval of a new Information Collection (IC) titled, 391.41 CMV Driver Medication Form. Comments received in response to this notice are sent to the OMB Desk Officer to address. This IC is voluntary and may be utilized by medical examiners (MEs) responsible for issuing Medical Examiner's Certificates (MECs) to commercial motor vehicle (CMV) drivers. MEs that choose to use this IC will do so in an effort to communicate with treating healthcare professionals who are responsible for prescribing certain medications, so that the ME fully understands the reasons the medications have been prescribed. The information obtained by the ME when utilizing this IC will assist the ME in determining if the driver is medically certified according to the physical qualifications standards outlined in 49 CFR 391.41 and to ensure that there are no disqualifying medical conditions or underlying medical conditions and prescribed medications that could adversely affect their safe driving ability or cause incapacitation constituting a risk to the public.

FMCSA announces its decision to renew the Virginia Department of Motor Vehicles (DMV) exemption on behalf of truck and bus drivers who are licensed in the Commonwealth of Virginia and need a Skill Performance Evaluation (SPE) certificate from FMCSA to operate commercial motor vehicles (CMV) in interstate commerce. The exemption enables interstate CMV drivers who are licensed in Virginia and are subject to the Federal SPE requirements under 49 CFR 391.49 to continue to fulfill the Federal requirements with a State-issued SPE and to operate CMVs in interstate commerce anywhere in the United States.

The Department of Transportation is directing all interested persons to show cause why it should not issue an order finding Tropic Ocean Airways, LLC, fit, willing, and able, and awarding it Commuter Air Carrier Authorization.

In accordance with the procedures governing the application for, and the processing of, special permits from the Department of Transportation's Hazardous Material Regulations (49 CFR part 107, subpart B), notice is hereby given that the Office of Hazardous Materials Safety has received the application described herein. Each mode of transportation for which a particular special permit is requested is indicated by a number in the ``Nature of Application'' portion of the table below as follows: 1Motor vehicle, 2Rail freight, 3Cargo vessel, 4Cargo aircraft only, 5Passenger-carrying aircraft.

We are adopting a new airworthiness directive (AD) for certain The Boeing Company Model 787-8 airplanes. This AD was prompted by reports of water leakage from the potable water system due to improperly installed waterline couplings, and water leaking into the electronics equipment (EE) bays from above the floor in the main cabin, resulting in water on the equipment in the EE bays. This AD requires replacing the potable waterline couplings above the forward and aft EE bays with new, improved couplings. This AD also requires sealing the main cabin floor areas above the aft EE bay, installing drip shields and foam blocks, and rerouting the wire bundles near the drip shields above the equipment in the aft EE bay. We are issuing this AD to prevent a water leak from an improperly installed potable water system coupling, or main cabin water source, which could cause the equipment in the EE bays to become wet, resulting in an electrical short and potential loss of system functions essential for safe flight.