Department of Transportation March 2015 – Federal Register Recent Federal Regulation Documents
Results 101 - 150 of 226
Airworthiness Directives; British Aerospace Regional Aircraft Airplanes
We are superseding an airworthiness directive (AD) 2014-06-03 for British Aerospace Regional Aircraft Model Jetstream Series 3101 and Jetstream Model 3201 airplanes. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as stress corrosion cracking of the main landing gear spigot housing. We are issuing this AD to require actions to address the unsafe condition on these products.
Airworthiness Directives; Lockheed Martin Corporation/Lockheed Martin Aeronautics Company Airplanes
We are adopting a new airworthiness directive (AD) for certain Lockheed Martin Corporation/Lockheed Martin Aeronautics Company Model 382, 382B, 382E, 382F, and 382G airplanes. This AD was prompted by an evaluation by the design approval holder (DAH) indicating that the upper and lower rainbow fittings on the outer wing are subject to widespread fatigue damage (WFD). This AD requires repetitive inspections of the upper and lower rainbow fittings on the outer wing to detect cracks propagating from fasteners attaching the fittings to skin panels, and related investigative and corrective actions if necessary; and replacement of the upper and lower rainbow fittings on the outer wing. We are issuing this AD to prevent fatigue cracking of the upper and lower rainbow fittings on the outer wing and skin-panel- to-fitting fastener holes, which could result in reduced structural integrity of the airplane and possible separation of the wing from the airplane.
Thirty-Second Meeting: RTCA Special Committee 224, Airport Security Access Control Systems
The FAA is issuing this notice to advise the public of the thirty-second meeting of the RTCA Special Committee 224, Airport Security Access Control Systems.
Agency Information Collection Activities: Requests for Comments; Clearance of Renewed Approval of Information Collection: Organization Designation Authorization
In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew an information collection. The Federal Register Notice with a 60-day comment period soliciting comments on the following collection of information was published on December 22, 2014. This collection involves organizations applying to perform certification functions on behalf of the FAA, including approving data and issuing various aircraft and organization certificates.
Airworthiness Directives; Stemme AG Gliders
We are adopting a new airworthiness directive (AD) for Stemme AG TSA-M Models S6 and S6-RT gliders. This AD results from mandatory continuing airworthiness information (MCAI) issued by the aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as a bending defect of the fork head installed in the aileron, speed brake, and flap control systems. We are issuing this AD to require actions to address the unsafe condition on these products.
Airworthiness Directives; Short Brothers & Harland Ltd. Airplanes
The FAA is correcting an airworthiness directive (AD) that published in the Federal Register. That AD applies to all Short Brothers & Harland Ltd. Model SC-7 Series 3 airplanes. The amendment number in the Agency Identification Numbers in the preamble section of the AD is incorrect. Although no other part of the preamble or regulatory information has been corrected, we are publishing the entire rule in the Federal Register.
Airworthiness Directives; Agusta S.p.A. Helicopters
We are superseding Airworthiness Directive (AD) 2014-04-14 for Agusta S.p.A. (Agusta) Model A109S, AW109SP, A119, and AW119 MKII helicopters. AD 2014-04-14 required removing certain rod end assemblies from service because of reports of fractures. This new AD retains the requirements of AD 2014-04-14 but expands the scope of applicable rod end assemblies. This AD was prompted by reports of additional fractured rod end assemblies. We are issuing this AD to prevent failure of a rod end assembly, which could result in damage to the main rotor assembly and loss of control of the helicopter.
Nineteenth Meeting: RTCA Special Committee 225, Rechargeable Lithium Battery and Battery Systems
The FAA is issuing this notice to advise the public of the nineteenth meeting of the RTCA Special Committee 225, Rechargeable Lithium Battery and Battery Systems.
Notice of Request To Release Airport Property
The FAA proposes to rule and invites public comment on the release of land, Lot #7, 14550 Terminal Ave., at the Ottumwa Regional Airport, Ottumwa, Iowa, under the provisions of 49 U.S.C. 47107(h)(2).
Prevention of Alcohol Misuse and Prohibited Drug Use in Transit Operations
This notice announces the 2015 random testing rates for employers subject to the Federal Transit Administration's (FTA) drug and alcohol rules.
Agency Request for Emergency Processing of Collection of Information by the Office of Management and Budget
FRA hereby gives notice that it is submitting the following Information Collection request (ICR) to the Office of Management and Budget (OMB) for Emergency processing under the Paperwork Reduction Act of 1995 and its implementing regulations. FRA requests that OMB immediately authorize the collection of information identified below on March 18, 2015, for a period of 180 days.
Railworthiness Directive for Railroad Tank Cars Equipped With Certain McKenzie Valve & Machining LLC Valves
Recent FRA investigations identified several railroad tank cars transporting hazardous materials and leaking small quantities of product from the cars' liquid lines. FRA's investigation revealed that the liquid lines of the leaking tank cars were equipped with a certain type of 3 ball valve marketed and sold by McKenzie Valve and Machining (McKenzie) (formerly McKenzie Valve & Machining Company), an affiliate company of Union Tank Car Company (UTLX). FRA further found certain closure plugs installed on the 3 valves cause mechanical damage to the valves, which leads to the destruction of the valves' seal integrity and that the 3 valves, as well as similarly-designed 1 and 2 valves provided by this manufacturer are not approved for use on tank cars. FRA is issuing this Railworthiness Directive (Directive) to all owners of tank cars used to transport hazardous materials within the United States to ensure they identify and appropriately remove and replace these valves with approved valves consistent with Federal regulations.
Parts and Accessories Necessary for Safe Operation; Exemption Renewal for Lytx, Inc.
FMCSA renews Lytx, Inc.'s (Lytx) (previously DriveCam, Inc.) \1\ exemption which allows the placement of video event recorders within the swept area of the windshields on commercial motor vehicles (CMVs). Motor carriers may continue to use the video event recorders mounted in the windshield area to increase safety through (1) identification and remediation of risky driving behaviors such as distracted driving and drowsiness; (2) enhanced monitoring of passenger behavior for CMVs in passenger service; and (3) enhanced collision review and analysis. The Agency has concluded that granting this exemption renewal will maintain a level of safety that is equivalent to or greater than the level of safety achieved without the exemption. However, the Agency requests comments and information on the exemption, especially from anyone who believes this standard will not be maintained.
Hours of Service of Drivers: Oregon Trucking Associations' Application for Exemption
FMCSA announces its decision to grant the application of the Oregon Trucking Associations (OTA) for a limited exemption from the Agency's hours-of-service (HOS) regulation requiring commercial motor vehicle (CMV) drivers to take 30-minute rest breaks at specified intervals in their duty day. This exemption is limited to CMV drivers engaged in transporting timber from Oregon forestlands, and further limited to periods of the year in which the Oregon Department of Forestry (ODF) has formally restricted logging operations to certain hours of the day due to an elevated risk of forest fire. FMCSA believes that the rest breaks during these periods of restricted operating hours may reduce the volume of timber that OTA drivers can deliver, affecting the economic viability of the Oregon lumber industry. The Agency grants this limited exemption on condition that these exempt drivers do not drive after the 12th hour of their duty day. The Agency finds that the CMV operations of OTA timber transporters under this limited exemption would likely achieve a level of safety equivalent to or greater than the level of safety that would be obtained in the absence of the exemption.
Parts and Accessories Necessary for Safe Operation; Mobileye, Inc., Application for an Exemption
The Federal Motor Carrier Safety Administration (FMCSA) announces its decision to grant Mobileye, Inc.'s (Mobileye) exemption application to enable motor carriers to utilize its camera-based collision avoidance systems (CAS) mounted within the swept area of the windshield wipers. The Federal Motor Carrier Safety Regulations (FMCSRs) currently require antennas, transponders, and similar devices to be located outside the area swept by the windshield wipers. The Mobileye CAS is able to warn drivers of potential hazards by detecting other vehicles, pedestrians and cyclists on the road, and lane markings and traffic signs. The Agency believes the use of the CAS promotes improved safety performance and that the placement of the system in the swept area of the windshield wipers will not obstruct drivers' view of the roadway and potential hazards. The Agency has concluded that the limited 2-year exemption will achieve a level of safety equivalent to or greater than the level of safety provided by the rule restricting the placement of devices in the windshield area.
Qualification of Drivers; Exemption Applications; Vision
FMCSA announces receipt of applications from 28 individuals for exemption from the vision requirement in the Federal Motor Carrier Safety Regulations. They are unable to meet the vision requirement in one eye for various reasons. The exemptions will enable these individuals to operate commercial motor vehicles (CMVs) in interstate commerce without meeting the prescribed vision requirement in one eye. If granted, the exemptions would enable these individuals to qualify as drivers of commercial motor vehicles (CMVs) in interstate commerce.
Qualification of Drivers; Exemption Applications; Vision
FMCSA announces receipt of applications from 21 individuals for exemption from the vision requirement in the Federal Motor Carrier Safety Regulations. They are unable to meet the vision requirement in one eye for various reasons. The exemptions will enable these individuals to operate commercial motor vehicles (CMVs) in interstate commerce without meeting the prescribed vision requirement in one eye. If granted, the exemptions would enable these individuals to qualify as drivers of commercial motor vehicles (CMVs) in interstate commerce.
Qualification of Drivers; Exemption Applications; Vision
FMCSA announces its decision to renew the exemptions from the vision requirement in the Federal Motor Carrier Safety Regulations for 11 individuals. FMCSA has statutory authority to exempt individuals from the vision requirement if the exemptions granted will not compromise safety. The Agency has concluded that granting these exemption renewals will provide a level of safety that is equivalent to or greater than the level of safety maintained without the exemptions for these commercial motor vehicle (CMV) drivers.
Hours of Service of Drivers: Trailways Companies, Application for Renewal of Exemption
FMCSA announces that it has received an application from Adirondack Trailways, Pine Hill Trailways, and New York Trailways (``Trailways'') for a renewal of their exemption from the hours-of- service (HOS) record of duty status (RODs) provision in 49 CFR 395.8(c). Trailways currently holds an exemption for the period of May 31, 2013 to May 31, 2015. FMCSA extended the exemption to include all regular-route passenger carriers and their drivers rather than limiting it to Trailways' drivers. The renewal of the exemption would allow these drivers to perform their daily duties without having to record entries in the daily log for breaks in driving time of 10 minutes or less. Such activity would not be considered a change of duty status. FMCSA requests public comment on Trailways' application for exemption.
Qualification of Drivers; Exemption Applications; Diabetes Mellitus
FMCSA announces receipt of applications from 39 individuals for exemption from the prohibition against persons with insulin-treated diabetes mellitus (ITDM) operating commercial motor vehicles (CMVs) in interstate commerce. If granted, the exemptions would enable these individuals with ITDM to operate CMVs in interstate commerce.
Hazardous Materials Safety Program
In preparation for the International Civil Aviation Organization's (ICAO) Dangerous Goods Panel's (DGP's) meeting to be held April 27-May 1, 2015, in Montreal, Canada, the FAA's Office of Hazardous Materials Safety and the Pipeline and Hazardous Materials Safety Administration's (PHMSA) Office of Hazardous Materials Safety announce a public meeting.
Notice of Final Federal Agency Actions on Proposed Highway in California
The FHWA, on behalf of Caltrans, is issuing this notice to announce actions taken by Caltrans and U.S. Fish and Wildlife Service that are final within the meaning of 23 U.S.C. 139(l)(1). The actions relate to a proposed highway project known as CURE Safety Improvement that proposes to remove all fixed objects in the clear recovery zone along a 4-mile section of the southbound roadside of Highway 101 between King City and Greenfield in Monterey County, State of California. Those actions grant licenses, permits, and approvals for the project.
Agency Information Collection Activity Under OMB Review
The Federal Transit Administration invites public comment about its intention to request the Office of Management and Budget's (OMB) approval to renew the following information collection:
Agency Information Collection Activity Under OMB Review
The Federal Transit Administration invites public comment about its intention to request the Office of Management and Budget's (OMB) approval to renew the following information collection:
Notice of Request for the Extension of a Currently Approved Information Collection
In accordance with the Paperwork Reduction Act of 1995, this notice announces the intention of the Federal Transit Administration (FTA) to request the Office of Management and Budget (OMB) to approve the revision of the currently approved information collection: Job Access and Reverse Commute Program.
Airworthiness Directives; General Electric Company Turbofan Engines
We propose to adopt a new airworthiness directive (AD) for all General Electric Company (GE) GEnx turbofan engine models. This proposed AD was prompted by reports of GEnx-1B and GEnx-2B engines experiencing power loss in ice crystal icing (ICI) conditions. This proposed AD would preclude the use of full authority digital engine control (FADEC) software, version B175 or earlier, in GEnx-1B engines, and the use of FADEC software, version C065 or earlier, in GEnx-2B engines. We are proposing this AD to prevent engine failure, loss of thrust control, and damage to the airplane.
Airworthiness Directives; Flugzeugwerke Altenrheim AG (FFA) Airplanes
We are adopting a new airworthiness directive (AD) for Flugzeugwerke Altenrheim AG (FFA) Models AS 202/15 ``BRAVO'', AS 202/ 18A ``BRAVO'', and AS 202/18A4 ``BRAVO'' airplanes. This AD results from mandatory continuing airworthiness information (MCAI) issued by the aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as corrosion on the upper forward fuselage stringers. We are issuing this AD to require actions to address the unsafe condition on these products.
Airworthiness Directives; Airbus Airplanes
We propose to supersede Airworthiness Directive (AD) 2008-22- 20, for certain Airbus Model A330-200, A330-300, and A340-300 series airplanes. AD 2008-22-20 currently requires repetitive high frequency eddy current (HFEC) inspections for cracking, repair if necessary, and modification of the upper shell structure of the fuselage. Since we issued AD 2008-22-20, we have determined from a fatigue and damage tolerance evaluation that the compliance times must be reduced. This proposed AD would shorten certain compliance times. We are proposing this AD to prevent fatigue cracking of the upper shell structure of the fuselage, which could result in reduced structural integrity of the airplane.
Airworthiness Directives; Bombardier, Inc. Airplanes
We are adopting a new airworthiness directive (AD) for certain Bombardier, Inc. Model CL-600-2B19 (Regional Jet Series 100 & 440) airplanes. This AD was prompted by reports of cracking on the skin panels and skin splice joints and angles at certain stringers at various locations between certain fuselage stations. This AD requires revising the maintenance or inspection program, as applicable, to incorporate new or revised maintenance requirements and airworthiness limitations, and incorporating structural repairs and modifications to preclude widespread fatigue damage (WFD). We are issuing this AD to detect and correct WFD, which could adversely affect the structural integrity of the airplane.
Motor Carrier Safety Advisory Committee (MCSAC): Public Meeting
FMCSA announces that its MCSAC will meet on Monday and Tuesday, March 30-31, 2015. The MCSAC will meet to discuss and analyze data to support the potential benefits and feasibility of voluntary compliance and ways to credit carriers and drivers who initiate and establish programs that promote safety beyond the standards established in FMCSA regulations. The meeting will be open to the public for its entirety with a public comment period at the end of each day. Times and Dates: The meeting will be held MondayTuesday, March 30-31, 2015, from 9 a.m. to 4:30 p.m., Eastern Daylight Time (EDT), at the Hyatt Regency Crystal City, 2799 Jefferson Davis Highway, Arlington, VA 22202, (703) 418-1234. Copies of the MCSAC Task Statement and an agenda for the entire meeting will be made available in advance of the meeting at https://mcsac.fmcsa.dot.gov.
Petition for Exemption From the Vehicle Theft Prevention Standard; Volkswagen Group of America, Inc.
This document grants in full the Volkswagen Group of America, Inc.'s (Volkswagen's) petition for exemption of the Audi TT vehicle line in accordance with 49 CFR part 543, Exemption from the Theft Prevention Standard. This petition is granted because the agency has determined that the antitheft device to be placed on the line as standard equipment is likely to be as effective in reducing and deterring motor vehicle theft as compliance with the parts-marking requirements of 49 CFR part 541, Federal Motor Vehicle Theft Prevention Standard (Theft Prevention Standard).
Commercial Space Transportation Advisory Committee-Open Meeting
Pursuant to Section 10(a)(2) of the Federal Advisory Committee Act (Pub. L. 92-463, 5 U.S.C. App. 2), notice is hereby given of a meeting of the Commercial Space Transportation Advisory Committee (COMSTAC). The meeting will take place on Wednesday, April 1, 2015, from 8:00 a.m. to 5:00 p.m. at the National Transportation Safety Board Conference Center, 429 L'Enfant Plaza SW., Washington, DC 20594. This will be the 61st meeting of the COMSTAC. The proposed schedule for the COMSTAC working group meetings on April 1 is below:
Airworthiness Directives; Bombardier, Inc. Airplanes
We are superseding Airworthiness Directive (AD) 2015-02-06 for certain Bombardier, Inc. Model CL-600-2B16 (CL-604 Variant) airplanes. AD 2015-02-06 required a revision to the airplane flight manual, a revision to the maintenance or inspection program, as applicable, and replacement of horizontal stabilizer trim actuators (HSTAs) having certain part numbers. This new AD continues to require those actions and corrects certain typographical errors. This AD was prompted by the discovery of three typographical errors in AD 2015-02-06. We are issuing this AD to detect and correct loose spur gear bolts on the HSTA, which, if combined with the failure of the primary load path, could lead to failure of the HSTA and subsequent loss of the airplane.
Airworthiness Directives; Bell Helicopter Textron Canada Helicopters
We are adopting a new airworthiness directive (AD) for Bell Helicopter Textron Canada (BHTC) Model 407 helicopters. This AD requires inspecting the aft fuselage upper skin (upper skin) for a crack and the upper left longeron assembly (longeron assembly) for a crack, corrosion, or defect. This AD requires replacing or repairing a part or section, depending on the inspection's outcome. This AD was prompted by reports of cracks in the upper left-hand longeron. This AD's actions are intended to prevent failure of the longeron assembly or the upper skin, which could lead to a structural failure and loss of helicopter control.
Airworthiness Directives; The Boeing Company Airplanes
We are adopting a new airworthiness directive (AD) for all The Boeing Company Model 757-200, -200PF, -200CB, and -300 series airplanes; and Model 767-200, -300, -300F, and -400ER series airplanes. This AD was prompted by reports indicating that the counterweights in some hub assemblies of the ram air turbine (RAT) could be understrength and fracture when the RAT is rotating, and that some RAT hub assemblies were delivered with balance washer retention screws that were incorrectly heat-treated, and therefore, susceptible to fracture and cracking. This AD requires a part number and serial number inspection to determine if certain RAT hub assemblies are installed; and, for affected RAT hub assemblies, doing an inspection for missing and fractured balance washer screws, and replacement or rework if necessary. We are issuing this AD to prevent an inoperative RAT, which, following a dual engine shutdown in flight, will cause loss of all hydraulic power to the primary flight controls, resulting in subsequent loss of control of the airplane.
Notice of Availability of Revised Guidance on the Environmental Review Process
The Federal Highway Administration (FHWA) and Federal Transit Administration (FTA) announce the availability of its revised Section 139 Environmental Review Process guidance (previously referred to as the SAFETEA-LU Environmental Review Process Final Guidance), which was amended to reflect provisions of the Moving Ahead for Progress in the 21st Century Act (MAP-21). The document provides guidance on environmental review process requirements and best management practices for transportation projects funded or approved by the FHWA, FTA, or both agencies. The revisions to the joint guidance reflect the FHWA and FTA's proposed implementation of the MAP-21 changes within their statutory environmental review process requirements, in accordance with the National Environmental Policy Act (NEPA) and other Federal laws. The FHWA and FTA request public comments on the proposed guidance.
Notice of Final Federal Agency Actions on South Mountain Freeway (Loop 202), Interstate 10 (Papago Freeway) to Interstate 10 (Maricopa Freeway) in Phoenix, AZ
In accordance with the National Environmental Policy Act (NEPA) and FHWA procedures, this notice announces the availability of the ROD regarding the South Mountain Freeway project in Phoenix, AZ. The Arizona Division Administrator signed the ROD on March 5, 2015. In addition, this notice announces actions taken by FHWA and other Federal agencies that are final within the meaning of 23 U.S.C. 139(l)(1). The actions relate to the design and construction of the Selected Alternative for the South Mountain Freeway project. Those actions grant licenses, permits, and approvals for the project.
Filing Process for Petitions for Waiver and Other Exemptions, Applications, and Special Approvals
This document provides the public notice that FRA has created an electronic mailbox to receive petitions for waivers and exemptions from railroad safety rules and regulations, as well as applications for modification or discontinuance of railroad signal systems (block signal applications) and certain special approvals from railroad safety rules and regulations. The email address for this inbox is FRAWaivers@dot.gov. FRA requests that all railroad safety waiver and exemption requests, as well as block signal applications and special approval applications be submitted either to FRA's Docket Clerk in accordance with the existing requirements in Title 49 Code of Federal Regulations (CFR) Part 211, Rules of Practice, or to this email address.
Establishment of Class E Airspace; Rogue Valley, OR
This action establishes Class E airspace at the Rogue Valley VHF Omni-Directional Radio Range Tactical Air Navigation Aid (VORTAC), Rogue Valley, OR, to facilitate vectoring of Instrument Flight Rules (IFR) aircraft under control of Seattle and Oakland Air Route Traffic Control Centers (ARTCCs). This action enhances the safety and management of IFR operations within the National Airspace System (NAS).
Establishment of Class E Airspace; Seattle, WA
This action establishes Class E airspace at Seattle, WA, to facilitate vectoring of Instrument Flight Rules (IFR) aircraft under control of Seattle Air Route Traffic Control Center (ARTCC). This action enhances the safety and management of IFR operations within the National Airspace System (NAS).
Establishment of Class E Airspace, and Amendment of Class D and Class E Airspace; Prescott, AZ
This action establishes Class E airspace and modifies Class D and Class E surface area airspace at Prescott, AZ, to accommodate aircraft departing and arriving under Instrument Flight Rules (IFR) at Ernest A. Love Field. New Area Navigation (RNAV) Global Positioning System (GPS) standard instrument approach procedures have made this action necessary for the safety and management of IFR operations at the airport. The geographic coordinates of the airport are adjusted in the respective Class D and Class E airspace areas. This also corrects the airport name to Ernest A. Love Field.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.