Department of Transportation March 2013 – Federal Register Recent Federal Regulation Documents

FMCSA announces that its Motor Carrier Safety Advisory Committee will meet from Monday-Wednesday, April 8-10, 2013, in Alexandria, VA. On Monday and Tuesday, April 8 and 9, 2013, the MCSAC will complete its deliberations on Task 13-1 concerning entry-level driver training (ELDT). The MCSAC will receive a briefing from its Compliance, Safety and Accountability (CSA) subcommittee concerning the subcommittee's preliminary work, to date. The MCSAC will also receive briefings from the Agency on its Motor Carrier Safety Assistance Program and the requirements for States to adopt and enforce compatible regulations and FMCSA exemptions allowing motor carriers to use windshield-mounted driver video monitoring systems. On Wednesday, April 10, 2013, the MCSAC's CSA Subcommittee will convene. Meetings are open to the public for their entirety and there will be a public comment period at the end of each day. Times and Dates: The meeting will be held Monday-Tuesday, April 8- 9, 2013, from 9 a.m. to 5 p.m., Eastern Daylight Time (E.D.T.), and on Wednesday, April 10, 2013, from 9 a.m. to 4 p.m., E.D.T. The meetings will be held at the Hilton Alexandria Old Town, 1767 King Street, Alexandria, VA 22314 in the Washington and Jefferson Rooms on the 2nd floor. The Hilton Alexandria Old Town is located across the street from the King Street Metro station. Copies of all MCSAC Task Statements and an agenda for the entire meeting will be made available in advance of the meeting at https:// mcsac.fmcsa.dot.gov.

We are adopting a new airworthiness directive (AD) for Bell Helicopter Textron, Inc. (Bell), Model 412 and 412EP helicopters. This AD requires establishing a lower life limit on certain swashplate outer ring assemblies (outer ring), revising the retirement life on the components' history card or equivalent record, and revising the maintenance manual or Instructions for Continued Airworthiness (ICA). This AD also prohibits installing these outer rings on any helicopter. This AD was prompted by reports of cracking in the outer rings. The actions are intended to prevent failure of an outer ring because of cracking, which could lead to the loss of main rotor (M/R) blade pitch control and subsequent loss of helicopter control.

We propose to supersede an existing airworthiness directive (AD) for all Rolls-Royce plc (RR) RB211-Trent 553-61, 553A2-61, 556-61, 556A2-61, 556B-61, 556B2-61, 560-61, 560A2-61, 768-60, 772-60, 772B-60, 875-17, 877-17, 884-17, 884B-17, 892-17, 892B-17, and 895-17 turbofan engines. The existing AD currently requires inspection of the intermediate-pressure (IP) compressor rotor shaft rear balance land for cracks. Since we issued that AD, a crack was detected in a Trent 500 IP compressor rotor shaft rear balance land during a shop visit, and further engineering evaluation done by RR concluded that the cracking may also exist in Trent 900 engines. This proposed AD would require inspections of the IP compressor rotor shaft as required by the existing AD while adding on-wing inspections for the Trent 500 engines, and on-wing and in-shop inspections for the Trent 900 engines. We are proposing this AD to detect cracking on the IP compressor rotor shaft rear balance land, which could lead to uncontained engine failure and damage to the airplane.

We are adopting a new airworthiness directive (AD) for certain The Boeing Company Model 777-200, -200LR, -300, and -300ER series airplanes. This AD was prompted by reports of in-service events related to electrical power system malfunctions resulting in damage to electrical load management system (ELMS) P200 and P300 power panels and the surrounding area. This AD requires installing enclosure trays to contain debris in certain ELMS panels, and replacing certain ELMS contactors. We are issuing this AD to prevent contactor failures, which could result in uncontained hot debris flow due to ELMS contactor breakdown, consequent smoke and heat damage to airplane structure and equipment during ground operations, and possible injuries to passengers and crew.

We are adopting a new airworthiness directive (AD) for certain The Boeing Company Model 777-200, -200LR, -300, and -300ER series airplanes. This AD was prompted by fuel system reviews conducted by the manufacturer. This AD requires doing an inspection to identify the part number of the motor-operated valve (MOV) actuators of the main and center fuel tanks; replacing certain MOV actuators with new MOV actuators; and measuring the electrical resistance of the bond from the adapter plate to the airplane structure, and doing corrective actions if necessary. We are issuing this AD to prevent electrical current from flowing through an MOV actuator into a fuel tank, which could create a potential ignition source inside the fuel tank. This condition, in combination with flammable fuel vapors, could result in a fuel tank explosion and consequent loss of the airplane.

As part of its continuing effort to reduce paperwork burdens, and as required by the Paperwork Reduction Act of 1995, 44 U.S.C. 3501- 3519 (PRA), the Surface Transportation Board (Board) gives notice that it is requesting from the Office of Management and Budget (OMB) approval of the information collectionSystem Diagram Mapsfurther described below. The Board previously published a notice about this collection in the Federal Register on January 17, 2013, at 78 FR 3968. That notice allowed for a 60-day public review and comment period. No comments were received. Comments may now be submitted to OMB concerning (1) whether the collection is necessary for the proper performance of the functions of the Board, including whether the collection has practical utility; (2) the accuracy of the Board's burden estimates; (3) ways to enhance the quality, utility, and clarity of the information collected; and (4) ways to minimize the burden of the collection of information on the respondents, including the use of automated collection techniques or other forms of information technology when appropriate. Comments will be summarized and included in the Board's request for OMB approval.

The FHWA is issuing this notice to advise the public that we are rescinding the Notice of Intent (NOI) and Draft Environmental Impact Statement (EIS) for proposed Loop 9 from US 287 to IH 20. A NOI to prepare an EIS for proposed Loop 9 was published in the Federal Register on August 2, 2002 (Volume 67, No. 149, Page 50504), with a subsequent revision to the project limits published in the Federal Register on January 20, 2004 (Vol. 69, No. 12, Page 2809).

This action modifies Class E airspace at Scammon Bay Airport, Scammon Bay, AK. Controlled airspace is necessary to accommodate aircraft using a new Area Navigation (RNAV) Global Positioning System (GPS) standard instrument approach procedures at Scammon Bay Airport. This action enhances the safety and management of aircraft operations at the airport.

We are adopting a new airworthiness directive (AD) for certain Rolls-Royce Deutschland Ltd & Co KG (RRD) Tay 611-8 turbofan engines. This AD requires inspection and replacement, if necessary, of affected bolts. This AD was prompted by a quality review determination that bolts with reduced material properties may have been installed in some engines. We are issuing this AD to prevent uncontained turbine disc fracture and damage to the airplane.

We are adopting a new airworthiness directive (AD) for certain Rolls-Royce Deutschland Ltd & Co KG (RRD) models Tay 620-15 and Tay 650-15 turbofan engines. This AD was prompted by RRD recalculating the Declared Safe Cyclic Life (DSCL) for certain low-pressure compressor (LPC) rotor disc assemblies operating to the Plan D Flight Mission. This AD requires removing the affected LPC rotor disc assemblies at a new lower recalculated DSCL. We are issuing this AD to prevent failure of the LPC rotor disc assembly, uncontained engine failure, and damage to the airplane.

We are adopting a new airworthiness directive (AD) for certain Airbus Model A330-200, -300, and -200 Freighter series airplanes; and all Airbus Model A340-200 and -300 series airplanes. This AD was prompted by a determination that the bonding lead from a certain isolation valve to a frame was too close to an electrical harness, which might cause chafing between the electrical harness and the associated bonding lead. This chafing could lead to a short circuit of the isolation valve and consequent non-closure of the isolation valve, which would prevent the air flow to be shut off in case of fire. This AD requires modifying the bonding lead installation of the isolation valve. We are issuing this AD to prevent such chafing, which could result in non-closure of the isolation valve in the event of a fire and consequent damage to the airplane and injury to its occupants.

Under 49 U.S.C. 10502, the Board revokes the class exemption as it pertains to the trackage rights described in Docket No. FD 35715 \1\ to permit the trackage rights to expire 24 months after the commencement date of the agreement, or the date that the Gary City Track Connection, which is located at or near Gary, Ind., is completed and in use, whichever comes first, in accordance with the agreement of the parties, subject to the employee protective conditions set forth in Oregon Short Line RailroadAbandonment Portion Goshen Branch Between Firth & Ammon, in Bingham & Bonneville Counties, Idaho, 360 I.C.C. 91 (1979).

This SNPRM would further modify Class E airspace at Eureka Airport, Eureka, NV. In a NPRM published in the Federal Register on December 21, 2012, the FAA proposed to create additional airspace at Eureka Airport to accommodate aircraft using Area Navigation (RNAV) Global Positioning System (GPS) standard instrument approach procedures. The FAA has found that further enlargement of Class E airspace 1,200 feet above the surface is necessary to enhance safety in the Eureka, NV area.

The FAA proposes to rule and invites public comment on the release of land at the Ankeny Regional Airport, Ankeny, Iowa, under the provisions of U.S.C.

FMCSA announces receipt of applications from 8 individuals for exemption from the vision requirement in the Federal Motor Carrier Safety Regulations. They are unable to meet the vision requirement in one eye for various reasons. The exemptions will enable these individuals to operate commercial motor vehicles (CMVs) in interstate commerce without meeting the prescribed vision requirement in one eye. If granted, the exemptions would enable these individuals to qualify as drivers of commercial motor vehicles (CMVs) in interstate commerce.

The FAA is issuing this notice to advise the public of the first meeting of the RTCA Tactical Operations Committee.

FMCSA announces receipt of applications from 20 individuals for exemption from the prohibition against persons with insulin-treated diabetes mellitus (ITDM) operating commercial motor vehicles (CMVs) in interstate commerce. If granted, the exemptions would enable these individuals with ITDM to operate CMVs in interstate commerce.

FMCSA announces its decision to renew the exemptions from the vision requirement in the Federal Motor Carrier Safety Regulations for 15 individuals. FMCSA has statutory authority to exempt individuals from the vision requirement if the exemptions granted will not compromise safety. The Agency has concluded that granting these exemption renewals will provide a level of safety that is equivalent to or greater than the level of safety maintained without the exemptions for these commercial motor vehicle (CMV) drivers.

In compliance with the Paperwork Reduction Act of 1995 (44 U.S.C. 3501 et seq.), this notice announces that the information collection under Office of Management and Budget (OMB) Control No. 2137-0605, titled ``Integrity Management in High Consequence Areas for Operators of Hazardous Liquid Pipelines'' is being forwarded to OMB for review and comments. A Federal Register notice with a 60-day comment period soliciting comments on this information collection was published on December 13, 2012, (77 FR 74276) under docket number PHMSA-2012- 0302. No comments were received. The purpose of this notice is to allow the public an additional 30 days to send comments to OMB on the information collection as described below.

In preparation for the International Civil Aviation Organization's (ICAO) Dangerous Goods Panel's (DGP's) Spring Working Group to be held April 15-19, 2013, in Montreal, Canada, the FAA's Office of Hazardous Materials Safety and the Pipeline and Hazardous Materials Safety Administration's (PHMSA) Office of Hazardous Materials Safety announce a public meeting.

This rule establishes, amends, suspends, or revokes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.

This document responds to a petition for reconsideration of FRA's final rule published on June 12, 2012, mandating that certain railroads establish and maintain systems that allow members of the public to call the railroads, using a toll-free telephone number, and report an emergency or other unsafe condition at highway-rail and pathway grade crossings. This document amends and clarifies the final rule.

The FHWA invites public comments about our intention to request the Office of Management and Budget's (OMB) approval for a new information collection, which is summarized below under SUPPLEMENTARY INFORMATION. We are required to publish this notice in the Federal Register by the Paperwork Reduction Act of 1995.