Department of Transportation December 1, 2011 – Federal Register Recent Federal Regulation Documents
Results 1 - 17 of 17
Harmonization of Various Airworthiness Standards for Transport Category Airplanes-Flight Rules
This rule amends the regulations governing various airworthiness standards for transport category airplanes. This action harmonizes the requirements for takeoff speeds, static lateral-directional stability, speed increase and recovery characteristics, and the stall warning margin for the landing configuration in icing conditions with the European Aviation Safety Agency (EASA) certification standards.
Critical Parts for Airplane Propellers
The Federal Aviation Administration (FAA) proposes to amend the airworthiness standards for airplane propellers. This action would define what a propeller critical part is, require the identification of propeller critical parts by the manufacturer, and establish engineering, manufacture, and maintenance processes for those parts. The intended effect of this proposal is to ensure the continued airworthiness of propeller critical parts by requiring a system of processes to identify and manage these parts throughout their service life. Adopting this proposal would eliminate regulatory differences between part 35 and European Aviation Safety Agency (EASA) propeller critical parts requirements, thereby simplifying airworthiness approvals for exports.
Random Drug and Alcohol Testing Percentage Rates of Covered Aviation Employees for the Period of January 1, 2012, Through December 31, 2012
The FAA has determined that the minimum random drug and alcohol testing percentage rates for the period January 1, 2012, through December 31, 2012, will remain at 25 percent of safety- sensitive employees for random drug testing and 10 percent of safety- sensitive employees for random alcohol testing.
Damage Tolerance and Fatigue Evaluation of Composite Rotorcraft Structures
This rule revises airworthiness standards for type certification requirements of normal and transport category rotorcraft. The amendment requires evaluation of fatigue and residual static strength of composite rotorcraft structures using a damage tolerance evaluation, or a fatigue evaluation if the applicant establishes that a damage tolerance evaluation is impractical. The amendment addresses advances in composite structures technology and provides internationally harmonized standards.
Reports, Forms, and Recordkeeping Requirements
Before a Federal agency can collect certain information from the public, it must receive approval from the Office of Management and Budget (OMB). Under procedures established by the Paperwork Reduction Act of 1995, before seeking OMB approval, Federal agencies must solicit public comment on proposed collections of information, including extensions and reinstatement of previously approved collections. This document describes an existing collection of information for motor vehicle tire and rim labeling requirements for which NHTSA intends to seek renewed OMB approval.
Reports, Forms, and Recordkeeping Requirements
Before a Federal agency can collect certain information from the public, it must receive approval from the Office of Management and Budget (OMB). Under procedures established by the Paperwork Reduction Act of 1995, before seeking OMB approval, Federal agencies must solicit public comment on proposed collections of information, including extensions and reinstatement of previously approved collections. This document describes an existing collection of information for 49 CFR part 574, Tire Identification and Recordkeeping, for which NHTSA intends to seek renewed OMB approval.
New Car Assessment Program (NCAP); Safety Labeling
This document contains corrections to a final rule (49 CFR 575.302), which was published in the Federal Register of Friday, July 29, 2011 (76 FR 45453). The final rule amended NHTSA's regulation on vehicle labeling of safety rating information to reflect the enhanced NCAP ratings program.
RTCA Program Management Committee
The FAA is issuing this notice to advise the public of a meeting of RTCA Program Management Committee
Agency Information Collection Activities: Requests for Comments; Clearance of Renewed Approval of Information Collection: New England Region Aviation Expo Database
In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew an information collection. The Federal Register Notice with a 60-day comment period soliciting comments on the following collection of information was published on September 23, 2011, vol. 76, no. 185, page 59186. The New England Region Aviation Expo database performs conference registration and helps plan the logistics and non-pilot courses for the expo.
Agency Information Collection Activities: Requests for Comments; Clearance of Renewed Approval of Information Collection: Aircraft Registration Renewal
In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew an information collection. The Federal Register Notice with a 60-day comment period soliciting comments on the following collection of information was published on September 23, 2011, vol. 76, no. 185, page 59185. Aircraft owners are required to complete the Aircraft Registration Renewal to verify the registration information and renew registration triennially. The information collected on an Aircraft Re- Registration Application, AC Form 8050-1A will be used by the FAA to verify and update aircraft registration information collected for an aircraft when it was first registered.
Agency Information Collection Activities: Requests for Comments; Clearance of Renewed Approval of Information Collection: Use of Certain Personal Oxygen Concentrator (POC) Devices on Board Aircraft
In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew an information collection. The Federal Register Notice with a 60-day comment period soliciting comments on the following collection of information was published on September 23, 2011, vol. 76, no. 185, page 59184-59185. A Special Federal Aviation Regulation requires passengers who intend to use an approved POC to present a physician statement before boarding. The flight crew must then inform the pilot-in-command that a POC is on board.
Agency Information Collection Activities: Requests for Comments; Clearance of Renewed Approval of Information Collection: Notice of Landing Area Proposal
In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew an information collection. The Federal Register Notice with a 60-day comment period soliciting comments on the following collection of information was published on September 23, 2011, vol. 76, no. 185, pages 59185-59186. FAA Form 7480-1 (Notice of Landing Area Proposal) is used to collect information about any construction, alteration, or change to the status or use of an airport.
Release of Airport Property, Martin County Airport, Stuart, FL
The FAA hereby proposes to rule and invites public comment on its intent to release certain obligated properties, namely approximately 200 acres at the Martin County Airport, Stuart, FL, from the conditions, reservations, and restrictions as contained in a Surplus Property Agreement between the FAA and the Martin County, dated July 1, 1947, and in accordance with the provisions of Title 49 U.S.C. 47153(c). In anticipation and consideration of its request for a release, Martin County contracted for the installation of Engineered Materials Arresting Systems (EMAS) on Runway 12-30 at the Martin County Airport. The County also advised that its release request is designed to clarify the airport property and to correct ambiguities in title records since portions of the property contemplated by its release requested have been transferred over a number of years to a number of private and public parties. The release of the airport premises thus allows for the FAA and Martin County to establish a reliable and accurate boundary of obligated airport property. The property to be released includes parcels occupied by portions of the Martin County Golf Course, the YMCA, residential developments, a drainage area, and vacant lands. These parcels are currently designated as non-aeronautical use. The County accommodated the installation EMAS on Runway 12-30, enhancing safety for aeronautical users without impacting useable runway length in consideration of its request that a portion of the airport property be released of its federal obligations. The release of the nearly 200 acres also allows the FAA and the airport sponsor to establish and agree upon the boundary of airport property obligated through the Surplus Property Act of 1944. Additionally, the release will not prevent accomplishing the purpose for which the property was made subject to the terms, conditions, reservations, or restrictions, and will advance the interests of the United States in civil aviation. The FAA has preliminarily determined that the request to release property at the Martin County Airport submitted by the County met the procedural requirements of the Federal Aviation Regulations, 14 CFR part 155. Documents reflecting the Sponsor's request are available, by appointment only, for inspection at the Martin County Airport and the FAA Airports District Office.
Public Notice for Waiver of Aeronautical Land-Use Assurance at Auburn-Lewiston Municipal Airport, Auburn, ME
The FAA is considering a proposal to change a portion of the airport from aeronautical use to non-aeronautical use and to authorize the sale and/or conversion of airport property. The proposal consists of converting 4.1 acres of an 8.5 acre parcel to non-aeronautical use. This 8.5 acre residential property was acquired under grant 3-23- 0002-019-2010 for airport development purposes and to ensure compatible land-use. The portion of the property to be designated as non- aeronautical use will likely be leased as aviation compatible light industrial, retail, or mixed use development. The remaining 4.4 acres will remain aeronautical use and be used for airport development. There are no impacts to the airport by allowing the change in use of the parcel in question as it is not needed for aeronautical purposes. Approval does not constitute a commitment by the FAA to financially assist in the disposal of the subject airport property nor a determination of eligibility for grant-in-aid funding from the FAA. The disposition of proceeds from the disposal of the airport property will be in accordance with FAA's Policy and Procedures Concerning the Use of Airport Revenue, published in the Federal Register on February 16, 1999. In accordance with section 47107(h) of title 49, United States Code, this notice is required to be published in the Federal Register 30 days before modifying the land-use assurance that requires the property to be used for an aeronautical purpose.
Airworthiness Directives; The Boeing Company Model 737-200, -200C, -300, -400, and -500 Series Airplanes
We are superseding an existing airworthiness directive (AD) for certain Model 737-300, -400, and -500 series airplanes. That AD currently requires repetitive external non-destructive inspections to detect cracks in the fuselage skin along the chem-mill step at stringers S-1 and S-2 right, between station (STA) 827 and STA 847, and repair if necessary. This new AD adds inspections for cracking in additional fuselage crown skin locations, and repair if necessary. This new AD also reduces the inspection thresholds for certain airplanes, extends certain repetitive inspection intervals, and adds airplanes to the applicability of the existing AD. This AD was prompted by reports of additional crack findings of the fuselage crown skin at the chem- milled steps. We are issuing this AD to detect and correct fatigue cracking of the fuselage skin panels at the chem-milled steps, which could result in sudden fracture and failure of the fuselage skin panels, and consequent rapid decompression of the airplane.
2017 and Later Model Year Light-Duty Vehicle Greenhouse Gas Emissions and Corporate Average Fuel Economy Standards
EPA and NHTSA, on behalf of the Department of Transportation, are issuing this joint proposal to further reduce greenhouse gas emissions and improve fuel economy for light-duty vehicles for model years 2017-2025. This proposal extends the National Program beyond the greenhouse gas and corporate average fuel economy standards set for model years 2012-2016. On May 21, 2010, President Obama issued a Presidential Memorandum requesting that NHTSA and EPA develop through notice and comment rulemaking a coordinated National Program to reduce greenhouse gas emissions of light-duty vehicles for model years 2017- 2025. This proposal, consistent with the President's request, responds to the country's critical need to address global climate change and to reduce oil consumption. NHTSA is proposing Corporate Average Fuel Economy standards under the Energy Policy and Conservation Act, as amended by the Energy Independence and Security Act, and EPA is proposing greenhouse gas emissions standards under the Clean Air Act. These standards apply to passenger cars, light-duty trucks, and medium- duty passenger vehicles, and represent a continued harmonized and consistent National Program. Under the National Program for model years 2017-2025, automobile manufacturers would be able to continue building a single light-duty national fleet that satisfies all requirements under both programs while ensuring that consumers still have a full range of vehicle choices. EPA is also proposing a minor change to the regulations applicable to MY 2012-2016, with respect to air conditioner performance and measurement of nitrous oxides.
Airworthiness Directives; Bombardier, Inc. Airplanes
We are adopting a new airworthiness directive (AD) for Bombardier, Inc. Model DHC-8-201 and -202 airplanes with FAA Supplemental Type Certificate (STC) ST00753NY (Transport Canada Civil Aviation (TCCA) STC SA97-106) installed. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
