Department of Transportation 2010 – Federal Register Recent Federal Regulation Documents
Results 1,151 - 1,200 of 3,032
Airworthiness Directives; Airbus Model A380-800 Series Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; The Boeing Company Model 767-300 Series Airplanes
We are adopting a new airworthiness directive (AD) for certain Model 767-300 series airplanes. This AD requires replacing a wire bundle clamp and installing a tetrafluoroethylene (TFE 2X) sleeve. This AD results from fuel system reviews conducted by the manufacturer. We are issuing this AD to prevent chafing of a wiring bundle, which could result in a high-energy short and, consequently, a possible ignition source in the center auxiliary fuel tank.
Airworthiness Directives; Airbus Model A330-201, -202, -203, -223, -243, -301, -302, -303, -321, -322, -323, -341, -342, and -343 Airplanes, Model A340-211, -212, -213, -311, -312, and -313 Airplanes, and Model A340-541 and -642 Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; The Boeing Company Model 737-600, -700, -700C, -800, and -900 Series Airplanes
We are adopting a new airworthiness directive (AD) for certain Model 737-600, -700, -700C, -800, and -900 series airplanes. This AD requires replacement of the power control relays in the P91 and P92 power distribution panels for the fuel boost and override pumps with new, improved relays having a ground fault interrupter (GFI) feature, or installation and maintenance of universal fault interrupters (UFIs) using a certain supplemental type certificate. This AD results from fuel system reviews conducted by the manufacturer. We are issuing this AD to prevent pump housing burn-through due to electrical arcing, which could create a potential ignition source inside a fuel tank. This condition, in combination with flammable fuel vapors, could result in a fuel tank explosion and consequent loss of the airplane.
Airworthiness Directives; McDonnell Douglas Corporation Model MD-90-30 Airplanes
We are adopting a new airworthiness directive (AD) for certain Model MD-90-30 airplanes. This AD requires inspecting for corrosion of the retract cylinder support fitting for the main landing gear (MLG) and the mating bore for the support fitting in the MLG trunnion fitting, performing corrective actions if necessary, and replacing cadmium-plated retract cylinder support bushings and bearings. This AD results from reports of the retract cylinder support fitting for the MLG failing during gear extension and subsequently damaging the hydraulic system. We are issuing this AD to prevent corrosion and damage that could compromise the integrity of the retract cylinder support fitting for the MLG, which could adversely affect the airplane's safe landing.
Preliminary Theft Data; Motor Vehicle Theft Prevention Standard
This document requests comments on data about passenger motor vehicle thefts that occurred in calendar year (CY) 2008 including theft rates for existing passenger motor vehicle lines manufactured in model year (MY) 2008. The preliminary theft data indicate that the vehicle theft rate for CY/MY 2008 vehicles (1.69 thefts per thousand vehicles) decreased by 8.65 percent from the theft rate for CY/MY 2007 vehicles (1.85 thefts per thousand vehicles).
TTX Company-Application for Approval of Pooling of Car Service With Respect to Flatcars
In 2004, the Surface Transportation Board (Board) granted TTX Company (TTX) a 10-year extension of its authority to pool certain rail cars, subject to monitoring by the Board during the term of TTX's extension. Pursuant to this monitoring commitment, the Board, in September 2009, invited comments from interested parties on whether any of TTX's activities require oversight action by the Board. After reviewing the comments, the Board is issuing a final decision concluding that no modification to its approval of the activities of TTX pursuant to TTX's pooling agreement is required.
Qualification of Drivers; Exemption Applications; Vision
FMCSA announces its decision to renew the exemptions from the vision requirement in the Federal Motor Carrier Safety Regulations for 18 individuals. FMCSA has statutory authority to exempt individuals from the vision requirement if the exemptions granted will not compromise safety. The Agency has concluded that granting these exemption renewals will provide a level of safety that is equivalent to, or greater than, the level of safety maintained without the exemptions for these commercial motor vehicle (CMV) drivers.
Motor Carrier Safety Advisory Committee Public Meeting
FMCSA announces that its Motor Carrier Safety Advisory Committee (MCSAC) will hold a three-day committee meeting concerning fatigue management of commercial motor vehicle (CMV) operators, from August 30 through September 1, 2010. This meeting is open to the public.
Qualification of Drivers; Exemption Applications; Diabetes Mellitus
FMCSA announces its decision to exempt twenty individuals from its rule prohibiting persons with insulin-treated diabetes mellitus (ITDM) from operating commercial motor vehicles (CMVs) in interstate commerce. The exemptions will enable these individuals to operate CMVs in interstate commerce.
Modification of Class E Airspace; Astoria, OR
This action will amend Class E airspace at Astoria, OR, to accommodate aircraft using a new Area Navigation (RNAV) Global Positioning System (GPS) Standard Instrument Approach Procedure (SIAP) at Astoria Regional Airport. This will improve the safety and management of Instrument Flight Rules (IFR) operations at the airport. This action also will correct the airport name from Port of Astoria Airport, and makes minor adjustments to the legal description of the airspace.
Special Conditions: Erickson Air-Crane Incorporated S-64E and S-64F Rotorcraft
These special conditions are issued for the Erickson Air-Crane Incorporated (Erickson Air-Crane) model S-64E and S-64F rotorcraft. These rotorcraft have novel or unusual design features associated with being transport category rotorcraft designed only for use in heavy external-load operations. At the time of original type certification, a special condition was issued for each model helicopter because the applicable airworthiness regulations did not contain adequate or appropriate safety standards for turbine-engine rotorcraft or for rotorcraft with a maximum gross weight over 20,000 pounds that were designed solely to perform external load-operations. At the request of Erickson Air-Crane, the current type certificate (TC) holder for these helicopter models, the following will resolve reported difficulty in applying the existing special conditions and eliminate any confusion that has occurred in Erickson's dealings with a foreign authority. Specifically, we are consolidating the separate special conditions for each model helicopter into one special condition to clarify and more specifically reference certain special condition requirements to the regulatory requirements, to add an inadvertently omitted fire protection requirement, to recognize that occupants may be permitted in the two observer seats and the rear-facing operator seat during other than external-load operations, and to clarify the requirements relating to operations within 5 minutes of a suitable landing area. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.
Proposed Amendment of Class D and Class E Airspace; Klamath Falls, OR
This action proposes to amend Class D and Class E airspace at Klamath Falls, OR. Decommissioning of the Merrill Non-Directional Radio Beacon (NDB) at Klamath Falls Airport has made this action necessary for the safety and management of Instrument Flight Rules (IFR) operations at the airport. This action also would adjust the geographic coordinates of the airport and a navigation aid, and would change the name of the airport.
Proposed Establishment of Class E Airspace; Kalaupapa, HI
This action proposes to establish Class E airspace at Kalaupapa, HI, to accommodate aircraft using a new Area Navigation (RNAV) Global Positioning System (GPS) Standard Instrument Approach Procedure (SIAP) at Kalaupapa Airport. The FAA is proposing this action to enhance the safety and management of aircraft operations at the airport.
Maneuvering Speed Limitation Statement
The Federal Aviation Administration amends the airworthiness standards applicable to transport category airplanes to clarify that flying at or below the design maneuvering speed does not allow a pilot to make multiple large control inputs in one airplane axis or single full control inputs in more than one airplane axis at a time without endangering the airplane's structure. The FAA is issuing this final rule to prevent pilots from misunderstanding the meaning of an airplane's maneuvering speed, which could cause or contribute to a future accident.
Petition To Modify an Exemption of a Previously Approved Antitheft Device; Ford Motor Company
On February 14, 2006, the National Highway Traffic Safety Administration (NHTSA) granted in full Ford Motor Company's (Ford) petition for an exemption in accordance with Sec. 543.9(c)(2) of 49 CFR part 543, Exemption from the Theft Prevention Standard for the Ford Focus vehicle line beginning with model year (MY 2006). On June 18, 2010, Ford submitted a petition to modify its previously approved exemption for the Ford Focus vehicle line beginning with model year (MY) 2012. NHTSA is granting Ford's petition to modify the exemption in full because it has determined that the modified device is also likely to be as effective in reducing and deterring motor vehicle theft as compliance with the parts-marking requirements of the Theft Prevention Standard.
Reports, Forms, and Record Keeping Requirements
Before a Federal agency can collect certain information from the public, it must receive approval from the Office of Management and Budget (OMB). Under procedures established by the Paperwork Reduction Act of 1995 (44 U.S.C. 3501 et seq.), before seeking OMB approval, Federal agencies must solicit public comment on proposed collections of information, including extensions and reinstatements of previously approved collections.
Extension of Comment Period; Airplane and Engine Certification Requirements in Supercooled Large Drop, Mixed Phase, and Ice Crystal Icing Conditions
This action extends the comment period for an NPRM that was published on June 29, 2010. In that document, the FAA proposed to amend the airworthiness standards applicable to certain transport category airplanes certified for flight in icing conditions and the icing airworthiness standards applicable to certain aircraft engines. The
Procedures for Transportation Workplace Drug and Alcohol Testing Programs
The Department of Transportation (the Department or DOT) is amending certain provisions of its drug testing procedures dealing with laboratory testing of urine specimens. Some of the changes will also affect the training of and procedures used by Medical Review Officers. The changes are intended to create consistency with many, but not all, of the new requirements established by the U.S. Department of Health and Human Services.
Civil Penalties
This document proposes to increase the maximum civil penalty amounts for violations covering a related series of violations of the Vehicle Safety Act and violations of the odometer standard with intent to defraud. This action would be taken pursuant to the Federal Civil Monetary Penalty Inflation Adjustment Act of 1990, as amended by the Debt Collection Improvement Act of 1996, which requires us to review and, as warranted, adjust penalties based on inflation at least every four years.
Temporary Closure of I-70 (I-70/I-465 West Leg Interchange to the I-70/I-65 South Split Interchange) on October 7, 2010, in Indianapolis, IN
The FHWA has approved the request from the Indiana Department of Transportation (INDOT) to temporarily close a segment of I-70 (from the I-70/I-465 west leg interchange to the I-70/I-65 south split interchange) on October 7, 2010, for a 12-hour period from 6 a.m. to 6 p.m. The closure will accommodate a concentrated I-70 beautification project sponsored by INDOT. The approval is granted in accordance with the provisions of 23 CFR 658.11 which authorizes the deletion of segments of the federally designated routes that make up the National Network designated in Appendix A of 23 CFR Part 658. The FHWA published a Notice and Request for Comment on July 2, 2010, seeking comments from the general public on this request submitted by INDOT for a deletion in accordance with section 658.11(d). No public comments were received.
Office of Commercial Space Transportation; Availability of Finding of No Significant Impact (FONSI) and Record of Decision (ROD) for Actions Related to Environmental Assessment for the Expansion of the Wallops Flight Facility Launch Range
In accordance with the National Environmental Policy Act of 1969 (NEPA), 42 U.S.C. 4321-4347 (as amended), Council on Environmental Quality NEPA implementing regulations (40 Code of Federal Regulations (CFR) parts 1500 to 1508), and FAA Order 1050.1E, Change 1, the FAA is announcing the availability of a FONSI/ROD, based on the analysis and findings of the National Aeronautics and Space Administration's (NASA) August 2009 Environmental Assessment for the Expansion of the Wallops Flight Facility Launch Range (the EA). The FAA (Office of Commercial Space Transportation) participated as a cooperating agency with NASA in the preparation of the EA, which evaluates the potential environmental impacts of the proposed expansion of the Mid-Atlantic Regional Spaceport (MARS) at NASA's Goddard Space Flight Center Wallops Flight Facility (WFF). As the MARS expansion would require Federal actions (as defined in 40 CFR Section 1508.18) involving both NASA and the FAA, the EA was prepared to satisfy the NEPA obligations of both agencies. NASA, as the WFF property owner and lead agency, is responsible for ensuring overall compliance with applicable environmental statutes, including NEPA. The FAA served as a cooperating agency in the preparation of the EA because of its role in (1) licensing the Virginia Commercial Space Flight Authority (VCSFA) which operates MARS as a commercial launch site and (2) issuing licenses or permits to operate commercial launch and reentry vehicles at MARS. The FAA has formally adopted the EA and is using the FONSI/ROD to support the modification or renewal of VCSFA's Launch Site Operator License and issuance of licenses or experimental permits for commercial launch and reentry vehicles at MARS.
Fifth Meeting: RTCA Special Committee 219: Attitude and Heading Reference System (AHRS)
The FAA is issuing this notice to advise the public of a meeting of RTCA Special Committee 219: Attitude and Heading Reference System (AHRS).
Notice of Meeting
The U.S. Department of Transportation is providing notice that it intends to hold a Distracted Driving Summit (The Summit) to exchange information and ideas on the best possible methods to reduce the number of crashes and deaths due to distracted driving.
Notice of Final Federal Agency Actions on Proposed Highway in Indiana
This notice announces actions taken by the FHWA, the USFWS, and the USACE that are final within the meaning of 23 U.S.C. 139(l)(1). The actions relate to proposed highway projects for a 28.7 mile segment of I-69 in the Counties of Gibson, Pike and Daviess, State of Indiana, and a 25.73 mile segment of I-69 in the Counties of Daviess and Greene, State of Indiana, and grant licenses, permits, and approvals for the projects.
Requested Administrative Waiver of the Coastwise Trade Laws
As authorized by 46 U.S.C. 12121, the Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to grant waivers of the U.S.-build requirement of the coastwise laws under certain circumstances. A request for such a waiver has been received by MARAD. The vessel, and a brief description of the proposed service, is listed below. The complete application is given in DOT docket MARAD-2010-0072 at https://www.regulations.gov. Interested parties may comment on the effect this action may have on U.S. vessel builders or businesses in the U.S. that use U.S.-flag vessels. If MARAD determines, in accordance with 46 U.S.C. 12121 and MARAD's regulations at 46 CFR part 388 (68 FR 23084; April 30, 2003), that the issuance of the waiver will have an unduly adverse effect on a U.S.-vessel builder or a business that uses U.S.-flag vessels in that business, a waiver will not be granted. Comments should refer to the docket number of this notice and the vessel name in order for MARAD to properly consider the comments. Comments should also state the commenter's interest in the
Airworthiness Directives; BAE Systems (Operations) Limited Model Avro 146-RJ and BAe 146 Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; BAE Systems (Operations) Limited Model BAe 146-100A and -200A Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Airbus Model A300 B4-600, B4-600R, and F4-600R Series Airplanes, and Model C4-605R Variant F airplanes (Collectively Called A300-600 series airplanes); and A310 Series Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; The Boeing Company Model 777-200LR and -300ER Series Airplanes Equipped with GE90-100 Series Engines
We are adopting a new airworthiness directive (AD) for certain Model 777-200LR and -300ER series airplanes equipped with GE90-100 series engines. This AD requires replacing the insulation blanket fasteners of the lower aft cowl of the thrust reverser. This AD also requires inspecting the oil scavenge tube on the turbine rear frame of the engine for damage, and replacement if necessary. This AD results from a determination of insufficient clearance and subsequent interference between the oil scavenge tube on the turbine rear frame of the engine and the bolt on the aft cowl insulation blanket of the thrust reverser. We are issuing this AD to prevent damage and possible puncture of the oil scavenge tube and consequent oil loss, which could result in an in-flight shutdown of the engine.
Airworthiness Directives; Rolls-Royce plc (RR) RB211-Trent 900 Series Turbofan Engines
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
America's Marine Highway Grant Notice of Funding Availability
On October 28, 2009, the President of the United States signed the 2010 National Defense Authorization Act (NDAA). Section 3515 of the NDAA, titled America's Short Sea Transportation Grants for the Development of Marine Highways, amended Section 55601 of the 2007 Energy Independence and Security Act, titled Short Sea Transportation Program. Section 3515 of the NDAA directs the Secretary of Transportation (Secretary) to establish and implement a short sea transportation grant program to implement projects or components of a project designated under subsection (d) of Section 55601.
Future of Aviation Advisory Committee (FAAC); Notice of Meeting
The Department of Transportation, Office of the Secretary of Transportation, announces the third meeting of the FAAC, which will be held in the Chicago area. This notice announces the date, time and location of the meeting, which will be open to the public. The purpose of FAAC is to provide advice and recommendations to the Secretary of Transportation to ensure the competitiveness of the U.S. aviation industry and its capability to effectively manage the evolving transportation needs, challenges, and opportunities of the global economy.
Notice of Public Availability of the Final Environmental Assessment (EA) and Finding of No Significant Impact/Record of Decision (FONSI/ROD) Signed August 2, 2010, for the Evaluation of the Potential Environmental Impacts Associated With the Proposed Relocation of the Bowman County Airport (Airport) in Bowman County, ND.
The FAA has made available the final EA and FONSI/ROD for the proposed relocation of the Bowman County Airport. The EA was prepared in accordance with the National Environmental Policy Act (NEPA) of 1969, as amended, FAA Orders 1050.1E, ``Environmental Impacts: Policies and Procedures'' and FAA Order 5050.4B, ``NEPA Implementing Instructions for Airport Actions.''
Inclusion of Reference to Manual Requirements
The Federal Aviation Administration (FAA) is making a minor technical change to a final rule published in the Federal Register on October 16, 2009. That final rule established new requirements for the certification of products and articles. In that final rule, the FAA inadvertently did not change an affected regulatory reference in one section. The FAA is issuing this technical amendment to correct that oversight.
San Luis & Rio Grande Railroad-Petition for a Declaratory Order
In response to a petition filed by the San Luis & Rio Grande Railroad (SLRG), the Board is instituting a declaratory order proceeding under 5 U.S.C. 554(e) and 49 U.S.C. 721 to determine whether the Board's jurisdiction preempts the land use code of Conejos County, Colo. (County) that might otherwise apply to SLRG's proposed operation of a containerized truck-to-rail solid waste transload facility at Antonito, Colo. No responses to the petition have been filed. As discussed below, the Board will provide SLRG an opportunity to supplement its filing and will seek public comments in response, with a particular focus on, but not limited to, issues related to the Clean Railroads Act of 2008, 49 U.S.C. 10501(c)(2), 10908-10910 (CRA).
Airworthiness Directives; The Boeing Company Model 737-100, -200, -200C, -300, -400, and -500 Series Airplanes
We propose to adopt a new airworthiness directive (AD) for certain Model 737-100, -200, -200C, -300, -400, and -500 series airplanes. This proposed AD would require installing two warning level indicator lights on the P2-2 center instrument panel in the flight compartment for certain airplanes. For a certain other airplane, this proposed AD would require activating the cabin altitude warning and takeoff configuration warning lights. For all airplanes, this proposed AD also would require revising the airplane flight manual to remove certain requirements included by previous AD actions, to require new pressure altitude limitations for certain airplanes, and to advise the flightcrew of the following changes: revised emergency procedures to use when a cabin altitude warning or rapid depressurization occurs, and revised cabin pressurization procedures for normal operations. This proposed AD results from a design change in the cabin altitude warning
Airworthiness Directives; The Boeing Company Model 767-300 Series Airplanes
We propose to adopt a new airworthiness directive (AD) for certain Model 767-300 series airplanes. This proposed AD would require repetitive inspections for cracks in the fuselage skin and backup structure at the lower very high frequency (VHF) antenna cutout at station 1197 + 99 between stringers 39L and 39R, and corrective actions if necessary. Certain repairs would terminate certain inspection requirements. This proposed AD results from reports of cracking found in the section 46 fuselage lower skin around the periphery of the VHF antenna baseplate at station 1197 + 99. We are proposing this AD to detect and correct fatigue cracks in the fuselage skin and internal backup structure, which could result in rapid decompression of the airplane.
Airworthiness Directives; Eurocopter France Model AS-365N2, AS 365 N3, and SA-365N1 Helicopters
We propose to adopt a new airworthiness directive (AD) for the specified Eurocopter France model helicopters. This proposed AD would require replacing the aluminum tail rotor (T/R) blade pitch control shaft with a steel T/R blade pitch control shaft. This proposed AD is prompted by an incident involving a Eurocopter France Model AS-365N2 helicopter on which there was a loss of control of the T/R due to a broken shaft. The actions specified by this proposed AD are intended to prevent failure of the T/R blade pitch control shaft, loss of T/R control, and subsequent loss of control of the helicopter.
Airworthiness Directives; Eurocopter Deutschland GmbH (ECD) Model MBB-BK 117 C-2 Helicopters
We propose to supersede an existing airworthiness directive (AD) for ECD Model MBB-BK 117 C-2 helicopters. This proposed AD results from a mandatory continuing airworthiness information (MCAI) AD issued by the European Aviation Safety Agency (EASA), which is the Technical Agent for the Member States of the European Community. The MCAI AD states there was an in-flight incident in which a dynamic weight broke off the control lever leading to considerable vibrations. A visual inspection revealed that the threaded bolt of the control lever had broken off. The proposed actions are intended to prevent separation of dynamic weights, severe vibration, and subsequent loss of control of the helicopter.
Airworthiness Directives; Eurocopter France (ECF) Model AS350B3 and EC130 B4 Helicopters
We propose to adopt a new airworthiness directive (AD) for the specified ECF model helicopters. This proposed AD results from a mandatory continuing airworthiness information (MCAI) AD issued by the European Aviation Safety Agency (EASA), which is the Technical Agent for the Member States of the European Community. The MCAI AD states that a dormant failure of one of the two contactors 53Ka or 53Kb can occur following certain modifications. Failure of a contactor can prevent switching from ``IDLE'' mode to ``FLIGHT'' mode during autorotation training making it impossible to execute a power recovery and compelling the pilot to continue the autorotation to the ground. This condition, if not corrected, can lead to an unintended touchdown to the ground during a practice autorotation at a flight-idle power setting, damage to the helicopter, and injury to the occupants.
Automatic Dependent Surveillance-Broadcast (ADS-B) Out Performance Requirements To Support Air Traffic Control (ATC) Service; OMB Approval of Information Collection
This document notifies the public of the Office of Management and Budget's (OMB's) approval of the information collection requirement contained in the FAA's final rule, ``Automatic Dependent Surveillance- Broadcast (ADS-B) Out Performance Requirements To Support Air Traffic Control (ATC) Service,'' which was published on May 28, 2010.
Schedule of Fees Authorized by 49 U.S.C. 30141
This document adopts fees for Fiscal Year 2011 and until further notice, as authorized by 49 U.S.C. 30141, relating to the registration of importers and the importation of motor vehicles not certified as conforming to the Federal motor vehicle safety standards (FMVSS). These fees are needed to maintain the registered importer (RI) program.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.