Department of Transportation June 17, 2010 – Federal Register Recent Federal Regulation Documents

The FAA proposes to supersede an existing airworthiness directive (AD) for certain McCauley Propeller Systems propeller assemblies. That AD currently requires removing certain propeller hubs from service at new, reduced life limits and eddy current inspections (ECIs) of the propeller hub. This proposed AD would require removing certain propeller hubs from service before they exceed 6,000 hours time-since-new (TSN). This proposed AD results from a report of a crack in a propeller hub. We are proposing this AD to prevent cracked propeller hubs, which could cause failure of the propeller hub, blade separation, and loss of control of the airplane.

As authorized by 46 U.S.C. 12121, the Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to grant waivers of the U.S.-build requirement of the coastwise laws under certain circumstances. A request for such a waiver has been received by MARAD. The vessel, and a brief description of the proposed service, is listed below. The complete application is given in DOT docket MARAD-2010-0058 at https://www.regulations.gov. Interested parties may comment on the effect this action may have on U.S. vessel builders or businesses in the U.S. that use U.S.-flag vessels. If MARAD determines, in accordance with 46 U.S.C. 12121 and MARAD's regulations at 46 CFR part 388 (68 FR 23084; April 30, 2003), that the issuance of the waiver will have an unduly adverse effect on a U.S.-vessel builder or a business that uses U.S.-flag vessels in that business, a waiver will not be granted. Comments should refer to the docket number of this notice and the vessel name in order for MARAD to properly consider the comments. Comments should also state the commenter's interest in the

As authorized by 46 U.S.C. 12121, the Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to grant waivers of the U.S.-build requirement of the coastwise laws under certain circumstances. A request for such a waiver has been received by MARAD. The vessel, and a brief description of the proposed service, is listed below. The complete application is given in DOT docket MARAD-2010-0057 at https://www.regulations.gov. Interested parties may comment on the effect this action may have on U.S. vessel builders or businesses in the U.S. that use U.S.-flag vessels. If MARAD determines, in accordance with 46 U.S.C. 12121 and MARAD's regulations at 46 CFR part 388 (68 FR 23084; April 30, 2003), that the issuance of the waiver will have an unduly adverse effect on a U.S.-vessel builder or a business that uses U.S.-flag vessels in that business, a waiver will not be granted. Comments should refer to the docket number of this notice and the vessel name in order for MARAD to properly consider the comments. Comments should also state the commenter's interest in the

As authorized by 46 U.S.C. 12121, the Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to grant waivers of the U.S.-build requirement of the coastwise laws under certain circumstances. A request for such a waiver has been received by MARAD. The vessel, and a brief description of the proposed service, is listed below. The complete application is given in DOT docket MARAD-2010-0055 at https://www.regulations.gov. Interested parties may comment on the effect this action may have on U.S. vessel builders or businesses in the U.S. that use U.S.-flag vessels. If MARAD determines, in accordance with 46 U.S.C. 12121 and MARAD's regulations at 46 CFR part 388 (68 FR 23084; April 30, 2003), that the issuance of the waiver will have an unduly adverse effect on a U.S.-vessel builder or a business that uses U.S.-flag vessels in that business, a waiver will not be granted. Comments should refer to the docket number of this notice and the vessel name in order for MARAD to properly consider the comments. Comments should also state the commenter's interest in the

The Department of Transportation (DOT), Office of the Secretary of Transportation, announces a meeting of the FAAC Aviation Safety Subcommittee, which will be held July 6, 2010, in Chicago, Illinois. This notice announces the date, time, and location of the meeting, which will be open to the public. The purpose of the FAAC is to provide advice and recommendations to the Secretary of Transportation to ensure the competitiveness of the U.S. aviation industry and its capability to manage effectively the evolving transportation needs, challenges, and opportunities of the global economy. The Aviation Safety Subcommittee will develop a list of priority safety issues to be referred to the full committee for deliberation. The Subcommittee will also discuss a plan of action and timeline for further work and identification of priority issues for the second Subcommittee meeting.

Before a Federal agency can collect certain information from the public, it must receive approval from the Office of Management and Budget (OMB). Under procedures established by the Paperwork Reduction Act of 1995, before seeking OMB approval, Federal agencies must solicit public comment on proposed collections of information, including extensions and reinstatement of previously approved collections.

The Department of Transportation (DOT), Office of the Secretary of Transportation, announces a meeting of the FAAC Environment Subcommittee, which will be held at the office of The Boeing Company in Arlington, Virginia. This notice announces the date, time, and location of the meeting, which will be open to the public. The purpose of the FAAC is to provide advice and recommendations to the Secretary of Transportation to ensure the competitiveness of the U.S. aviation industry and its capability to manage effectively the evolving transportation needs, challenges, and opportunities of the global economy. The Environment Subcommittee is charged with examining steps and strategies that can be taken by aviation-sector stakeholders and the Federal Government to reduce aviation's environmental footprint and foster sustainability gains in cost-effective ways. This includes consideration of potential approaches to promote effective international actions through the International Civil Aviation Organization.

In accordance with the procedures governing the application for, and the processing of, special permits from the Department of Transportation's Hazardous Material Regulations (49 CFR part 107, subpart B), notice is hereby given that the Office of Hazardous Materials Safety has received the applications described herein. This notice is abbreviated to expedite docketing and public notice. Because the sections affected, modes of transportation, and the nature of application have been shown in earlier Federal Register publications, they are not repeated here. Requests for modification of special permits (e.g. to provide for additional hazardous materials, packaging design changes, additional mode of transportation, etc.) are described in footnotes to the application number. Application numbers with the suffix ``M'' denote a modification request. These applications have been separated from the new application for special permits to facilitate processing.

We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:

We are adopting a new airworthiness directive (AD) to supersede Airworthiness Directive (AD) 2006-17-01, AD 2006-15-07, AD 2000-02-25, and AD 97-25-02, which applies to certain Mitsubishi Heavy Industries, Ltd. (MHI) various Models MU-2B airplanes. An FAA MU-2B safety evaluation resulted in the standardization of the MU-2B specific training and the FAA-accepted pilot operating checklists through a special Federal aviation regulation (SFAR). MHI revised the airplane flight manuals (AFMs) to align them with the information in that training and the checklists. In addition, incorporating all AFM revisions up to and including this latest AFM revision will incorporate all AFM compliance actions required by the four above-mentioned ADs. This AD would retain from AD 2006-17-01 the inspection of the engine torque indication system and possible recalibration of the torque pressure transducers and would require incorporating all revisions up to and including the latest revisions of the AFM. We are issuing this AD to correct inconsistencies in critical operating procedures between the MU-2B specific training, the FAA-accepted pilot operating checklists, and the AFMs, which, if not corrected, could result in the pilot inadvertently taking inappropriate actions in critical operating conditions.