Department of Transportation March 4, 2008 – Federal Register Recent Federal Regulation Documents

Recent events concerning failures of mechanical couplings and related appurtenances have raised concerns about safety in natural gas distribution systems. This notice updates information provided in Advisory Bulletin ADB-86-02 and advises owners and operators of gas pipelines to consider the potential failure modes for mechanical couplings used for joining and pressure sealing two pipes together. Failures can occur when there is inadequate restraint for the potential stresses on the two pipes, when the couplings are incorrectly installed or supported, or when the coupling components such as elastomers degrade over time. In addition, inadequate leak surveys which fail to identify leaks requiring immediate repair can lead to more serious incidents. This notice urges operators to review their procedures for using mechanical couplings and ensure coupling design, installation procedures, leak survey procedures, and personnel qualifications meet Federal requirements. Operators should work with Federal and State pipeline safety representatives, manufacturers, and industry partners to determine how best to resolve potential issues in their respective state or region. Documented repair or replacement programs may prove beneficial to all stakeholders involved.

In accordance with the requirements of 49 U.S.C. 5117( c), PHMSA is publishing the following list of special permit applications that have been in process for 180 days or more. The reason(s) for delay and the expected completion date for action on each application is provided in association with each identified application.

This rule amends Standard Instrument Approach Procedures (SIAPs) for operations at certain airports. These regulatory actions are needed because of changes in the National Airspace System, such as the commissioning of new navigational facilities, adding of new obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.

We are adopting a new airworthiness directive (AD) to supersede AD 76-23-03 R1, which applies to certain Alexandria Aircraft, LLC Models 17-30, 17-31, 17-30A, and 17-31A airplanes. AD 76-23-03 R1 currently requires you to inspect the muffler and tailpipe assemblies for cracks and inspect the exhaust assembly for freedom of movement at the ball joints. Since we issued AD 76-23-03-R1, we have received additional reports of in-flight exhaust system failures. Consequently, this AD reduces the exhaust system inspection interval; requires a more detailed inspection of the muffler; and requires replacement, reconditioning, or repair of the exhaust system if cracks or defects are found. This AD also requires P-lead rerouting. We are issuing this AD to detect and correct cracks in the exhaust system, which could result in heat damage to magneto electrical wiring and smoke in the cockpit. This failure could lead to loss of engine power and/or a fire in the engine compartment.

We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:

We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:

The FAA adopts a new airworthiness directive (AD) for certain Cessna Aircraft Company (Cessna) 172, 182, and 206 series airplanes. This AD requires you to remove the crew seats, modify the seat base/ back attach brackets, and reinstall the seats of the affected airplanes. This AD results from reports of the seat base/back attach bracket failing where it is welded to the seat base. We are issuing this AD to prevent failure of the seat base/back attach brackets, which could result in the seats collapsing backwards during flight with consequent loss of control.

The FAA is superseding an existing airworthiness directive (AD), which applies to all EMBRAER Model EMB-135BJ, -135ER, -135KE, - 135KL, -135LR, -145, -145ER, -145MR, -145LR, -145XR, -145MP, and -145EP airplanes. That AD currently requires reviewing the airplane maintenance records for recent reports of vibration from the tail section or rudder pedals. The existing AD also currently requires repetitively inspecting the skin, attachment fittings, and control rods of rudder II to detect cracking, loose parts, wear, or damage; and related investigative/corrective actions if necessary. This new AD requires the existing repetitive inspection to be done with new service information. This new AD also requires replacing the locking tab washers on the control rods of the rudder II and installing springs on the hinge assemblies of the rudder II, which would terminate the repetitive inspection requirements. This AD results from reports of rudder vibration due to wear. We are issuing this AD to prevent failure of multiple hinge fittings, which could result in severe vibration, and to prevent failure of the rudder control rods, which could result in jamming of the rudder II; and possible structural failure and reduced controllability of the airplane.