Department of Transportation May 24, 2007 – Federal Register Recent Federal Regulation Documents
Results 1 - 13 of 13
Safety Advisory: Removal From Service of Liner-Less, Fully-Wrapped Fiberglass Composite Cylinders
Recently, five (5) 33-pound propane cylinders authorized under DOT Special Permit (DOT-SP 13957) ruptured during storage at a facility in Miami, Florida. The purpose of this notice is to alert owners and users of certain cylinders manufactured under this special permit to potential safety problems and to advise them to remove the cylinders from service as outlined in this notice. Also, PHMSA requests information on any other failures or leakage of lading, involving all cylinders made under DOT-SP 13957, which include 10-pound, 20-pound, and 33-pound cylinders, that may not have been previously reported to the agency.
Petition for Exemption; Summary of Petition Received
This notice contains a summary of a certain petition seeking relief from specified requirements of 14 CFR. The purpose of this notice is to improve the public's awareness of, and participation in, this aspect of FAA's regulatory activities. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of any petition or its final disposition.
Petitions for Exemption; Summary of Petitions Received
This notice contains a summary of certain petitions seeking relief from specified requirements of 14 CFR. The purpose of this notice is to improve the public's awareness of, and participation in, this aspect of FAA's regulatory activities. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of any petition or its final disposition.
Petition for Exemption; Summary of Petition Received
This notice contains a summary of a certain petition seeking relief from specified requirements of 14 CFR. The purpose of this notice is to improve the public's awareness of, and participation in, this aspect of FAA's regulatory activities. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of any petition or its final disposition.
Petitions for Exemption; Summary of Petitions Received
This notice contains a summary of certain petitions seeking relief from specified requirements of 14 CFR. The purpose of this notice is to improve the public's awareness of, and participation in, this aspect of FAA's regulatory activities. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of any petition or its final disposition.
Airworthiness Directives; Aerospatiale Model SN-601 (Corvette) Airplanes
We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Boeing Model 747-100, -200B, -200C, and -200F Series Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for certain Boeing Model 747-100, -200B, -200C, and -200F series airplanes. This proposed AD would require performing repetitive inspections for cracks in the fuselage skin at the cutout of the bulk cargo door light, and corrective actions if necessary. This proposed AD also provides terminating action for airplanes with a certain type of damage. This proposed AD results from a report of a 2-inch crack through the fuselage skin and internal bonded doubler at the cutout of the bulk cargo door light. We are proposing this AD to detect and correct cracks in the fuselage skin at the cutout of the bulk cargo door light, which could result in reduced structural integrity of the fuselage at the bulk cargo door and consequent rapid decompression of the fuselage.
Airworthiness Directives; Airbus Model A330 and A340 Airplanes
We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Lockheed Model 1329 Series Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for certain Lockheed Model 1329 series airplanes. This proposed AD would require determining the part number on the steering cylinder assembly for the nose landing gear (NLG), determining the total flight cycles accumulated on the NLG steering cylinder assembly, repetitive replacement of the assembly, inspecting for missing tow turning limit markings, and performing corrective actions if necessary. This proposed AD results from reports of numerous failures of the NLG steering cylinder. We are proposing this AD to prevent the loss of hydraulic pressure and steering control.
Airworthiness Directives; Empresa Brasileira de Aeronautica S.A. (EMBRAER) Model EMB-135BJ Airplanes
We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Amendment of Class E Airspace; Middlesboro, KY; Correction
This document contains a correction to the final rule (FAA- 2007-27262; 07-ASO-1), which was published in the Federal Register of May 8, 2007, (72 FR 25963), amending Class E airspace at Middlesboro, KY. This action corrects an error in the legal description for the Class E5 airspace at Middlesboro, KY.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
