Department of Transportation October 12, 2005 – Federal Register Recent Federal Regulation Documents
Results 1 - 21 of 21
Privacy Act of 1974: System of Records
DOT proposes to modify an existing system of records under the Privacy Act of 1974. Proposed modifications include changing the name from DOT/SLS 152 Data Automation Program Records to DOT/SLS 152 Travel Voucher Records; deleting some records now covered under Department of the Interior System of Records DOI-85; and updating administrative information.
Draft Supplemental Environmental Impact Statement for US 411 Connector, Bartow County, GA
In compliance with the National Environmental Policy Act of 1969, the FHWA, in cooperation with the Georgia Department of Transportation (GDOT), have jointly prepared a Draft Supplemental Environmental Impact Statement (DSEIS) for proposed transportation improvements in the US 411 Corridor. The project is within Bartow County. The DSEIS identifies various alternatives and the associated environmental impacts of the proposed alternatives. Interested citizens are invited to review the DSEIS and submit comments. Copies of the DSEIS may be obtained by telephoning or writing the contact person listed below under ADDRESSES. Public reading copies of the DSEIS are available at the locations listed under SUPPLEMENTARY INFORMATION.
Agency Information Collection Activities; Request for Comments; Clearance of a New Information Collection: Work Schedules and Sleep Patterns of Railroad Dispatchers
The Federal Railroad Administration invites public comments about our intention to request the Office of Management and Budget's (OMB) approval for a new information collection. The proposed collection involves the work schedules and sleep patterns of railroad dispatchers. FRA seeks to develop an understanding of the work schedule-related fatigue issues that affect railroad dispatchers. FRA will use the data obtained from the proposed collection (a survey) to identify whether or not this segment of the railroad workforce has a work and sleep schedule pattern that may compromise their ability to carry out their safety critical role in railroad operations in a suitable manner. FRA is required by the Paperwork Reduction Act of 1995 to publish this notice. The Federal Register notice with a 60-day comment period soliciting comments on the following collection of information was published on August 4, 2005.
Airworthiness Directives; Boeing Model 727, 727C, 727-100, and 727-100C Series Airplanes
This amendment adopts a new airworthiness directive (AD), applicable to certain Boeing Model 727, 727C, 727-100, and 727-100C series airplanes. This AD requires repetitive inspections of the frame inner chord, outer chord, and web of the forward and aft edge frames of the lower lobe forward cargo door (FCD) cutout, and corrective action if necessary. The actions specified by this AD are intended to detect and correct fatigue cracking of the forward and aft edge frames of the lower lobe FCD cutout, which could result in the loss of the FCD and rapid decompression of the airplane. This action is intended to address the identified unsafe condition.
Airworthiness Directives; Airbus Model A319-100 Series Airplanes; Model A320-111 Airplanes; Model A320-200 Series Airplanes, and Model A321-100 and -200 Series Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Airbus airplane models, as specified above. This AD requires modifying the floor proximity emergency escape path marking system. This AD results from information that the existing system design for interconnection of the emergency power supply units of the floor proximity emergency escape path marking system does not provide adequate floor path lighting and marking for safe evacuation of the airplane in the event of an emergency. We are issuing this AD to prevent inadequate lighting and marking of the escape path, which could delay or impede the flightcrew and passengers when exiting the airplane during an emergency landing.
Airworthiness Directives; Airbus Model A340-211, -212, -311, and -312 Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Airbus Model A340-211, -212, -311, and -312 airplanes. This AD requires an initial rotating probe inspection and initial and repetitive ultrasonic inspections for discrepancies of the first fastener hole of the horizontal flange of the keel beam on previously modified airplanes, installation of new fasteners, and corrective action if necessary. This AD results from a report that certain inspections done before accomplishing the modification of the lower keel beam fitting and forward lower shell connection, revealed cracking that was outside the modification limits specified in the service bulletin; the cracking was repaired by installing a titanium doubler. We are issuing this AD to find and fix discrepancies of the fastener holes of the horizontal flange of the keel beam, which could result in reduced structural integrity of the fuselage.
Airworthiness Directives; Boeing Model 747-100, 747-100B, 747-100B SUD, 747-200B, 747-300, 747SP, and 747SR Series Airplanes
The FAA is superseding an existing airworthiness directive (AD), which applies to certain Boeing Model 747 series airplanes. That AD currently requires repetitive inspections to detect cracks in various areas of the fuselage internal structure, and repair if necessary. This new AD requires repetitive inspections of additional areas of the fuselage internal structure, and related investigative/ corrective actions if necessary. This new AD also removes certain requirements from the existing AD. This AD results from fatigue testing of the fuselage structure of a Boeing Model 747SR series airplane. We are issuing this AD to prevent the loss of the structural integrity of the fuselage, which could result in rapid depressurization of the airplane.
Airworthiness Directives; Boeing Model 747-100, 747-100B, 747-100B SUD, 747-200B, 747-300, 747SP, and 747SR Series Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Boeing Model 747-100, 747-100B, 747-100B SUD, 747-200B, 747- 300, 747SP, and 747SR series airplanes. This AD requires repetitive inspections to detect cracks in various areas of the upper deck floor beams, and repair if necessary. This AD results from fatigue testing that revealed severed upper chords of the upper deck floor beams due to fatigue cracking. We are issuing this AD to detect and correct cracking in the upper chords of the upper deck floor beams. Undetected cracking could result in large deflection or deformation of the upper deck floor beams, resulting in damage to wire bundles and control cables for the flight control system, and reduced controllability of the airplane. Multiple adjacent severed floor beams could result in rapid decompression of the airplane.
Airworthiness Directives; Airbus Model A320-111 Airplanes
The FAA is superseding an existing airworthiness directive (AD), which applies to certain Airbus Model A320-111 airplanes. The existing AD currently requires repetitive inspections for cracking in the front and rear faces and at the crown fittings of the upper stringers of the center wing box and applicable repairs. This new AD requires continuing the repetitive inspections at revised thresholds and intervals, and applicable repairs. This AD results from a manufacturer survey of airplanes affected by the existing inspection program that led to the consequent revision of the thresholds and intervals of the repetitive inspections. We are issuing this AD to detect and correct fatigue cracking of the upper stringers of the center wing box, which could lead to loss of structural integrity of the wing.
Airworthiness Directives; British Aerospace Model HS 748 Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain British Aerospace Model HS 748 airplanes. This AD requires relocating the battery earth posts located on the nose landing gear (NLG) pintle webs. This AD results from an accident in which the nose landing leg, together with the pintle webs, detached from the airplane. As a result, the battery earth return cables were severed from their earth posts. We are issuing this AD to prevent loss of safety critical services including fuel shut-off and nacelle fire extinguishing services.
Airworthiness Directives; Airbus Model A320-111 Airplanes; and Model A320-200, A321-100, and A321-200 Series Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Airbus Model A320-111 airplanes; and Model A320-200, A321-100, and A321-200 series airplanes. This AD requires installing a bonding lead between the low pressure valve and the adjacent pipe assembly in each wing. This AD results from fuel system reviews conducted by the manufacturer. We are issuing this AD to prevent an ignition source for fuel vapor in the wing, which could result in fire or explosion in the adjacent wing fuel tank.
Airworthiness Directives; Empresa Brasileira de Aeronautica S.A. (EMBRAER) Model EMB-135BJ, -135ER, -135KE, -135KL, -135LR, -145, -145ER, -145MR, -145LR, -145XR, -145MP, and -145EP Airplanes
The FAA is adopting a new airworthiness directive (AD) for all EMBRAER Model EMB-135 airplanes and Model EMB-145, -145ER, -145MR, - 145LR, -145XR, -145MP, and -145EP airplanes. This AD requires repetitive detailed inspections for surface bruising of the main landing gear (MLG) trailing arms and integrity of the MLG pivot axle sealant, and corrective actions if necessary. This AD also provides for optional terminating action for the repetitive detailed inspections. This AD results from a report of a fractured axle of the trailing arm of the MLG due to corrosion of the axle. We are issuing this AD to prevent a broken trailing arm and consequent failure of the MLG, which could lead to loss of control and damage to the airplane during takeoff or landing.
Airworthiness Directives; Airbus Model A330-200 and -300 and A340-200 and -300 Series Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Airbus Model A330-200 and -300 and A340-200 and -300 series airplanes. This AD requires inspecting to determine the part number and serial number of the left- and right-hand elevator assemblies, performing related investigative and corrective actions if necessary, and re- protecting the elevator assembly. This AD results from reports that areas on the top skin panel of the right-hand elevator have disbonded due to moisture penetration. We are issuing this AD to prevent disbonding of the elevator assembly, which could reduce the structural integrity of the elevator and result in reduced controllability of the airplane.
Airworthiness Directives; Aviointeriors S.p.A. (formerly ALVEN), Series 312 Box Mounted Seats
The FAA is adopting a new airworthiness directive (AD) for Aviointeriors S.p.A. (formerly ALVEN), series 312 box mounted seats. This AD requires initial and repetitive inspections of the seat attachments for cracks, and if necessary, replacing the attachments. This AD results from 10 reports of cracked attachments of series 312 box mounted seats. We are issuing this AD to prevent series 312 box mounted seats from detaching from the passenger compartment floor, which could result in injury to the occupant of the seat, and prevent evacuation of passengers in the event of an emergency.
Airworthiness Directives; SOCATA-Groupe AEROSPATIALE Model TBM 700 Airplanes
The FAA adopts a new airworthiness directive (AD) for certain SOCATAGroupe AEROSPATIALE (SOCATA) Model TBM 700 airplanes. This AD requires you to inspect the fuselage skin in the VHF1 antenna mounting area for cracks and loose rivets. This AD also requires you to modify the area if you find cracks or loose rivets. This AD results from mandatory continuing airworthiness information (MCAI) issued by the airworthiness authority for France. We are issuing this AD to detect and correct cracks in the fuselage skin, which could result in loss of aircraft pressurization. Loss of aircraft pressurization could lead to flight crew incapacitation.
Airworthiness Directives; BURKHART GROB LUFT-UND RAUMFAHRT GmbH & CO KG Models G103 TWIN ASTIR, G103A TWIN II ACRO, and G103C TWIN III ACRO Sailplanes
The FAA is revising Airworthiness Directive (AD) 2003-19-14 R1, which applies to certain BURKHART GROB LUFTUND RAUMFAHRT GmbH & CO KG (GROB) Models G103 TWIN ASTIR, G103A TWIN II ACRO, and G103C TWIN III ACRO sailplanes. AD 2003-19-14 R1 requires you to modify the airspeed indicators, install flight speed reduction and aerobatic maneuver restrictions placards (as applicable), and revise the flight and maintenance manuals. AD 2003-19-14 R1 approves simple aerobatic maneuvers for Model G103A TWIN II ACRO sailplanes and provides an option for modifying the rear fuselage for Models G103A TWIN II ACRO and G103C TWIN III ACRO sailplanes to terminate the flight limitation restrictions for aerobatic maneuvers. This AD retains all the actions from AD 2003-19-14 R1 for Models G103A TWIN II ACRO and G103C TWIN III ACRO and reinstates certain operating limits for Model G103 TWIN ASTIR sailplanes. We are issuing this AD to prevent damage to the fuselage during limit load flight, which could result in reduced structural integrity. This condition could lead to loss of control of the sailplane.
Airworthiness Directives; The Cessna Aircraft Company Models 401, 401A, 401B, 402, 402A, 402B, 402C, 404, 411, 411A, 414, 414A, 421, 421A, 421B, 421C, 425, and 441 Airplanes
The FAA adopts a new airworthiness directive (AD) for certain The Cessna Aircraft Company (Cessna) Models 401, 401A, 401B, 402, 402A, 402B, 402C, 404, 411, 411A, 414, 414A, 421, 421A, 421B, 421C, 425, and 441 airplanes equipped with certain avionics bus circuit breaker switches. This AD requires you to inspect the avionics bus circuit breaker switch to determine the date code and replace any without a date code. This AD also imposes a 1,000-hour safe life limit on avionics bus circuit breaker switches with a date code earlier than 0434. This AD results from reports of smoke and a burning smell in the cockpit. We are issuing this AD to prevent failure of the avionics bus circuit breaker switch, which could result in smoke and a burning smell in the cockpit. This failure could lead to reduced ability to control the airplane.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
