November 3, 2020 – Federal Register Recent Federal Regulation Documents

Veteran's Benefits Administration (VBA), Department of Veterans Affairs (VA), is announcing an opportunity for public comment on the proposed collection of certain information by the agency. Under the Paperwork Reduction Act (PRA) of 1995, Federal agencies are required to publish notice in the Federal Register concerning each proposed collection of information, including each proposed extension of a currently approved collection, and allow 60 days for public comment in response to the notice.

The Department of Commerce (Commerce) preliminarily determines that mattresses from Serbia are being, or are likely to be, sold in the United States at less than fair value (LTFV). The period of investigation is January 1, 2019 through December 31, 2019. Interested parties are invited to comment on this preliminary determination.

The Department of Commerce (Commerce) preliminarily determines that mattresses from the Socialist Republic of Vietnam (Vietnam) are being, or are likely to be, sold in the United States at less than fair value (LTFV). The period of investigation (POI) is July 1, 2019 through December 31, 2019. Interested parties are invited to comment on this preliminary determination.

The Department of Commerce (Commerce) preliminarily determines that mattresses from Malaysia are being, or are likely to be, sold in the United States at less than fair value (LTFV). The period of investigation (POI) is January 1, 2019 through December 31, 2019. Interested parties are invited to comment on this preliminary determination.

The Department of Commerce (Commerce) preliminarily determines that mattresses from Thailand are being, or are likely to be, sold in the United States at less than fair value (LTFV). The period of investigation (POI) is January 1, 2019 through December 31, 2019. Interested parties are invited to comment on this preliminary determination.

This notice lists communities where the addition or modification of Base Flood Elevations (BFEs), base flood depths, Special Flood Hazard Area (SFHA) boundaries or zone designations, or the regulatory floodway (hereinafter referred to as flood hazard determinations), as shown on the Flood Insurance Rate Maps (FIRMs), and where applicable, in the supporting Flood Insurance Study (FIS) reports, prepared by the Federal Emergency Management Agency (FEMA) for each community, is appropriate because of new scientific or technical data. The FIRM, and where applicable, portions of the FIS report, have been revised to reflect these flood hazard determinations through issuance of a Letter of Map Revision (LOMR), in accordance with Federal Regulations. The LOMR will be used by insurance agents and others to calculate appropriate flood insurance premium rates for new buildings and the contents of those buildings. For rating purposes, the currently effective community number is shown in the table below and must be used for all new policies and renewals.

The Department of the Army is publishing this notice to announce the following virtual Federal Advisory Committee meeting of the Board of Visitors (Board) for the Western Hemisphere Institute for Security Cooperation (the Institute).

The National Institute of Standards and Technology (NIST) requests comments on Draft Federal Information Processing Standard (FIPS) 201-3, Personal Identity Verification (PIV) of Federal Employees and Contractors (Standard). This Standard defines common credentials and authentication mechanisms offering varying degrees of security for both logical and physical access applications. The draft revision proposes changes to FIPS 201-2, Standard for Personal Identity Verification of Federal Employees and Contractors to include: Expanding specification on the use of additional PIV credentials known as derived PIV credentials, procedures for supervised remote identity proofing, the use of federation as a means for a relying system to interoperate with PIV credentials issued by other agencies, alignment with the current practice/policy of the Federal Government and specific changes requested by Federal agencies and implementers. Before recommending these proposed changes to the Secretary of Commerce for review and approval, NIST invites comments from all interested parties.

The Office of the Secretary, the Department of Commerce (DOC), announces the appointment of those individuals who have been selected to serve as members of the Performance Review Board. The Performance Review Board is responsible for reviewing performance appraisals and ratings of Senior Executive Service (SES) members and Senior Level (SL) members and making recommendations to the appointing authority on other performance management issues, such as pay adjustments, bonuses and Presidential Rank Awards. The appointment of these members to the Performance Review Board will be for a period of twenty-four (24) months.

The FAA is adopting a new airworthiness directive (AD) for certain Pilatus Aircraft Ltd Model PC-24 airplanes. This AD was prompted by mandatory continuing airworthiness information (MCAI) issued by the aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as the vinyl grommets on the upper panel assembly on the left-hand (LH) and right-hand (RH) emergency exits becoming rigid after exposure to low temperatures, which could result in failure of the emergency exits to open during an evacuation. This AD requires replacing the grommets. The FAA is issuing this AD to address the unsafe condition on these products.

We are advising the public that the Animal and Plant Health Inspection Service (APHIS) has received a petition from Pioneer Hi-Bred International, Inc. seeking a determination of nonregulated status for DP23211 maize (corn). The corn is engineered for insect resistance against corn rootworm and contains the gene that codes for the phosphinothricin acetyltransferase protein responsible for tolerance to glufosinate-ammonium herbicides. DP23211 corn also contains the gene that encodes for the phosphomannose isomerase protein, which is used as a selectable marker. We are making the petition available for review and comment to help us identify potential issues and impacts that APHIS may determine should be considered in our evaluation of the petition.

Synthetic biology is a multidisciplinary field of research that involves the design, modification, and creation of biological systems and holds broad promise to advance both basic and applied research in areas ranging from materials science to molecular medicine. However, synthetic nucleic acids and associated technologies may also pose risks if misused. To reduce the risk that individuals with ill intent may exploit the application of nucleic acid synthesis technology to obtain genetic material derived from or encoding Select Agents and Toxins and, as applicable, agents on the Export Administration Regulations' (EAR's) Commerce Control List (CCL), the U.S. Government issued guidance in 2010 providing a framework for screening synthetic double-stranded DNA (dsDNA). This document, the Screening Framework Guidance for Providers of Synthetic Double-Stranded DNA (Guidance), sets forth recommended baseline standards for the gene and genome synthesis industry and other providers of synthetic dsDNA products, regarding the screening of orders, so they are filled in compliance with U.S. regulations prohibiting the possession, use, and transfer of specific pathogens and biological toxins. The other goals of the Guidance are to encourage best practices in addressing biosecurity concerns associated with the potential misuse of these products to inflict harm or bypass existing regulatory controls and to minimize any negative impacts on the conduct of research and business operations. Rapid and continued advances in nucleic acid synthesis technologies and synthetic biology applications necessitate periodic reevaluation of associated risks and mitigation measures. We invite public comments on whether and, if so, how the Guidance should be modified to address new and emerging challenges posed by advances in this area. Please submit all comments related to this request for information (RFI) through the web form on the Screening Framework Guidance for Providers of Synthetic Double-Stranded DNA website at https:// www.phe.gov/syndna/update2020.

The FAA is adopting a new airworthiness directive (AD) for all Airbus Helicopters Deutschland GmbH Model EC135P1, EC135P2, EC135P2+, EC135P3, EC135T1, EC135T2, EC135T2+, EC135T3, and EC635T2+ helicopters. This AD was prompted by reports of improper heat treatment of titanium (Ti)-bolts installed on the forward and aft tail rotor drive shafts, resulting in a broken Ti-bolt. This AD requires an inspection to determine if Ti-bolts installed on the forward and aft tail rotor drive shafts are affected parts, and replacement if necessary, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.

The FAA is adopting a new airworthiness directive (AD) for certain Airbus Helicopters Model AS332C1 and AS332L1 helicopters. This AD was prompted by a report that the affected helicopters use the same ``flight/ground'' logic signal, instead of independent redundant signals. This AD requires amending the emergency procedures of the existing rotorcraft flight manual (RFM) for your helicopter, a wiring modification of the ``flight/ground'' logic signal source of the attitude and heading reference system (AHRS) 1, and then removal of the amendment to the existing RFM for your helicopter. The FAA is issuing this AD to address the unsafe condition on these products.

HUD has submitted the proposed information collection requirement described below to the Office of Management and Budget (OMB) for review, in accordance with the Paperwork Reduction Act. The purpose of this notice is to allow for an additional 30 days of public comment.

HUD has submitted the proposed information collection requirement described below to the Office of Management and Budget (OMB) for review, in accordance with the Paperwork Reduction Act. The purpose of this notice is to allow for an additional 30 days of public comment.

The Internal Revenue Service, as part of its continuing effort to reduce paperwork and respondent burden, invites the general public and other Federal agencies to take this opportunity to comment on proposed and/or continuing information collections, as required by the Paperwork Reduction Act of 1995 (PRA). The IRS is soliciting comments on forms used by business entity taxpayers: Forms 1065, 1066, 1120, 1120-C, 1120-F, 1120-H, 1120-ND, 1120-S, 1120-SF, 1120-FSC, 1120-L, 1120-PC, 1120-REIT, 1120-RIC, 1120-POL; and related attachments to these forms (see the Appendix to this notice).