2015 – Federal Register Recent Federal Regulation Documents

As part of its continuing effort to reduce paperwork burdens, and as required by the Paperwork Reduction Act (PRA) of 1995 (44 U.S.C. 3501-3520), the Federal Communications Commission (FCC or Commission) invites the general public and other Federal agencies to take this opportunity to comment on the following information collections. Comments are requested concerning: Whether the proposed collection of information is necessary for the proper performance of the functions of the Commission, including whether the information shall have practical utility; the accuracy of the Commission's burden estimate; ways to enhance the quality, utility, and clarity of the information collected; ways to minimize the burden of the collection of information on the respondents, including the use of automated collection techniques or other forms of information technology; and ways to further reduce the information collection burden on small business concerns with fewer than 25 employees. The FCC may not conduct or sponsor a collection of information unless it displays a currently valid OMB control number. No person shall be subject to any penalty for failing to comply with a collection of information subject to the PRA that does not display a valid OMB control number.

As part of its continuing effort to reduce paperwork burdens, and as required by the Paperwork Reduction Act (PRA) of 1995 (44 U.S.C. 3501-3520), the Federal Communications Commission (FCC or Commission) invites the general public and other Federal agencies to take this opportunity to comment on the following information collections. Comments are requested concerning: whether the proposed collection of information is necessary for the proper performance of the functions of the Commission, including whether the information shall have practical utility; the accuracy of the Commission's burden estimate; ways to enhance the quality, utility, and clarity of the information collected; ways to minimize the burden of the collection of information on the respondents, including the use of automated collection techniques or other forms of information technology; and ways to further reduce the information collection burden on small business concerns with fewer than 25 employees. The FCC may not conduct or sponsor a collection of information unless it displays a currently valid OMB control number. No person shall be subject to any penalty for failing to comply with a collection of information subject to the PRA that does not display a valid OMB control number.

The Environmental Protection Agency (EPA) is taking final action under section 110 of the Clean Air Act (CAA or Act) to approve a State Implementation Plan (SIP) revision for five California air districts. The State of California (State) is required by the CAA to adopt and implement a SIP-approved Prevention of Significant Deterioration (PSD) permit program. This SIP revision incorporates PSD rules for five local California air districts into the California SIP to establish a PSD permit program for pre-construction review of certain new and modified major stationary sources in attainment and unclassifiable areas located within these districts. The local air districts with PSD rules that are the subject of this action are the Feather River Air Quality Management District (Feather River or FRAQMD), Great Basin Unified Air Pollution Control District (Great Basin or GBUAPCD), Butte County Air Quality Management District (Butte or BCAQMD), Santa Barbara County Air Pollution Control District (Santa Barbara or SBAPCD), and San Luis Obispo County Air Pollution Control District (San Luis Obispo or SLOAPCD)collectively, the Districts.

The Environmental Protection Agency (EPA) is proposing to approve a revision to the California State Implementation Plan (SIP) consisting of state regulations establishing standards and other requirements relating to the control of emissions from new on-road and new and in-use off-road vehicles and engines. The EPA is proposing to approve these regulations because they meet the applicable requirements of the Clean Air Act and are relied upon by various California plans intended to provide for the attainment or maintenance of the national ambient air quality standards.

The Department of the Treasury, as part of its continuing effort to reduce paperwork and respondent burden, invites the general public and other Federal agencies to take this opportunity to comment on a proposed and/or continuing information collection, as required by the Paperwork Reduction Act of 1995, Public Law 104-13 (44 U.S.C. 3506(c)(2)(A)). Currently the Bureau of the Fiscal Service within the Department of the Treasury is soliciting comments concerning the Supporting Statement of Ownership for Overdue United States Bearer Securities.

We propose to adopt a new airworthiness directive (AD) for certain Bombardier, Inc. Model CL-600-2C10 (Regional Jet Series 700, 701, & 702) airplanes, Model CL-600-2D15 (Regional Jet Series 705) airplanes, Model CL-600-2D24 (Regional Jet Series 900) airplanes, and Model CL-600-2E25 (Regional Jet Series 1000) airplanes. This proposed AD was prompted by the discovery of a number of incorrectly calibrated angle of attack (AOA) transducers installed in the stall protection system. This proposed AD would require replacement of affected AOA transducers. We are proposing this AD to detect and replace incorrectly calibrated AOA transducers; incorrect calibration of the transducers could result in late activation of the stick pusher.

We propose to adopt a new airworthiness directive (AD) for certain Airbus Defense and Space S.A. (formerly known as Construcciones Aeronauticas, S.A.) Model CN-235-200 and CN-235-300 airplanes. This proposed AD was prompted by reports of false engine fire warning events, which consequently led to engine in-flight shut down. This proposed AD would require modification of the location and routing of the engine fire detection system. We are proposing this AD to prevent unnecessary engine in-flight shut down, which could result in reduced controllability of the airplane.

This rule amends the Export Administration Regulations (EAR) by adding seven persons under ten entries to the Entity List. The seven persons who are added to the Entity List have been determined by the U.S. Government to be acting contrary to the national security or foreign policy interests of the United States. These persons will be listed on the Entity List under the destinations of China and Hong Kong. This final rule also removes two persons from the Entity List. One entity requested removal from the Entity List in accordance with the procedure for requesting removal or modification of an Entity List entity. The End-User Review Committee (ERC) decided to remove this entity following a review of information provided in the removal request. The ERC decided to remove a second person from the Entity List following a proposal submitted by an ERC member agency, in accordance with the procedure for requesting removal or modification of an Entity List entity. Finally, this final rule modifies ten existing entries on the Entity List consisting of one entry under China and nine entries under Hong Kong to provide additional or modified addresses and/or aliases for these persons.

The U.S. Agency for International Development (USAID) seeks public comment on a proposed rule that would revise the Agency for International Development Acquisition Regulation (AIDAR) to maintain consistency with Federal and Agency regulations and incorporate current and new USAID clauses into the regulation.

We are superseding Airworthiness Directive (AD) 2002-07-08 for certain The Boeing Company Model 737 airplanes. AD 2002-07-08 required repetitive inspections for cracking of the lower skin at the lower row of fasteners in the lap joints of the fuselage; repair of any cracking found; modification of the fuselage lap joints at certain locations, which terminated the repetitive inspections of the modified areas; and replacement of a certain preventive modification with an improved modification. This new AD adds repetitive inspections for cracking at certain window corner fastener holes, a preventive modification, and repair if necessary. This AD was prompted by the FAA's determination that certain modifications of the fuselage lap joints do not provide an adequate level of safety, and the subsequent discovery of cracks in additional fastener locations in the window belt skin panels, adjacent stringers, and window frames in locations outside the previous inspection area. We are issuing this AD to detect and correct fatigue cracking of the fuselage lap joints and window belt skin panels, which could result in reduced structural integrity and sudden decompression of the airplane.

The Department of Commerce (the Department) is amending the final determination in the less-than-fair-value investigation of welded line pipe from the Republic of Korea (Korea) to correct a ministerial error. The period of investigation is October 1, 2013, through September 30, 2014.

The Department of Commerce (the Department) has conducted an administrative review of the countervailing duty (CVD) order on drawn stainless steel sinks (sinks) from the People's Republic of China (PRC). The period of review (POR) is August 6, 2012, through December 31, 2013. On May 7, 2015, we published the preliminary results of this administrative review.\1\ We invited interested parties to comment on the Preliminary Results. After reviewing the comments received, we have made no changes to the Preliminary Results. As such, we continue to find that Guangdong Dongyuan Kitchenware Industrial Co., Ltd. (Dongyuan) received countervailable subsidies during the POR. We also find that Shunde Native Produce Import and Export Co., Ltd. of Guangdong (Native Produce) did not have any reviewable entries during the POR.

The U.S. Environmental Protection Agency (EPA) hereby gives public notice that the EPA has received a complete application from the Commonwealth of Kentucky requesting approval of its Underground Injection Control (UIC) Program for Class II injection wells. The EPA has determined the application contains all the required elements; see the ADDRESSES section for information on how to access the application documents. Public comments are requested and any member of the public may request a public hearing. This application would allow the Kentucky Division of Oil and Gas to regulate all Class II injection wells in Kentucky.

The FAA has determined that the minimum random drug and alcohol testing percentage rates for the period January 1, 2016, through December 31, 2016, will remain at 25 percent of safety- sensitive employees for random drug testing and 10 percent of safety- sensitive employees for random alcohol testing.

The Environmental Protection Agency (EPA) is proposing to convert the conditional approval of revisions to the Pennsylvania State Implementation Plan (SIP) submitted by the Commonwealth of Pennsylvania on behalf of the Allegheny County Health Department (ACHD) to a full approval. The SIP revision included amendments to the ACHD Rules and Regulations, Article XXI, Air Pollution Control, and meets the requirement to adopt Reasonably Available Control Technology (RACT) for sources covered by EPA's Control Techniques Guidelines (CTG) standards for the following categories: Miscellaneous metal and/or plastic parts surface coating processes, automobile and light-duty truck assembly coatings, miscellaneous industrial adhesives, and fiberglass boat manufacturing materials. Upon review of the submittal, EPA found that the average monomer volatile organic compound (VOC) content limits were referenced but not included in the regulation for fiberglass boat manufacturing materials. ACHD has revised the regulation and submitted the table of VOC content limits for fiberglass boat manufacturing materials to EPA in order to address specific RACT requirements for Allegheny County. EPA is, therefore, proposing to convert the conditional approval to a full approval of the revisions to the Pennsylvania SIP in accordance with the requirements of the Clean Air Act (CAA).

The Department of Commerce (the Department) is conducting an administrative review of the antidumping duty order on carbon and certain alloy steel wire rod (wire rod) from Mexico. The period of review (POR) is October 1, 2013 through September 30, 2014.\1\ This review covers two producers/exporters of subject merchandise: ArcelorMittal Las Truchas, S.A. de C.V. (AMLT) and Deacero S.A. de C.V. We preliminarily determine that AMLT and Deacero made sales of subject merchandise at less than normal value (NV) during the POR. Interested parties are invited to comment on these preliminary results.