Notification of Proposed Production Activity ASA Electronics, LLC Subzone 125D (Motor Vehicle Audio-Visual Products) Elkhart, Indiana, 69636 [2015-28669]
Download as PDF
asabaliauskas on DSK5VPTVN1PROD with NOTICES
69636
Federal Register / Vol. 80, No. 217 / Tuesday, November 10, 2015 / Notices
a meeting of the Federal Economic
Statistics Advisory Committee (FESAC).
The Committee will advise the Directors
of the Economics and Statistics
Administration’s (ESA) two statistical
agencies, the Bureau of Economic
Analysis (BEA) and the Census Bureau,
and the Commissioner of the U.S.
Department of Labor’s Bureau of Labor
Statistics (BLS) on statistical
methodology and other technical
matters related to the collection,
tabulation, and analysis of federal
economic statistics. Last minute changes
to the agenda are possible, which could
prevent giving advance public notice of
schedule adjustments.
DATES: December 11, 2015. The meeting
will begin at approximately 9:00 a.m.
and adjourn at approximately 4:30 p.m.
ADDRESSES: The meeting will be held at
the U.S. Census Bureau Conference
Center, 4600 Silver Hill Road, Suitland,
MD 20746.
FOR FURTHER INFORMATION CONTACT:
James R. Spletzer, Designated Federal
Official, Department of Commerce, U.S.
Census Bureau, Research and
Methodology Directorate, Room 5K175,
4600 Silver Hill Road, Washington, DC
20233, telephone 301–763–4069, email:
james.r.spletzer@census.gov. For TTY
callers, please call the Federal Relay
Service (FRS) at 1–800–877–8339 and
give them the above listed number you
would like to call. This service is free
and confidential.
SUPPLEMENTARY INFORMATION: Members
of the FESAC are appointed by the
Secretary of Commerce. The Committee
advises the Directors of the BEA, the
Census Bureau, and the Commissioner
of the Department of Labor’s BLS, on
statistical methodology and other
technical matters related to the
collection, tabulation, and analysis of
federal economic statistics. The
Committee is established in accordance
with the Federal Advisory Committee
Act (Title 5, United States Code,
Appendix 2).
The meeting is open to the public,
and a brief period is set aside for public
comments and questions. Persons with
extensive questions or statements must
submit them in writing at least three
days before the meeting to the
Designated Federal Official named
above. If you plan to attend the meeting,
please register by Tuesday, December 1,
2015. You may access the online
registration form with the following
link: https://www.regonline.com/fesac_
december2015_meeting. Seating is
available to the public on a first-come,
first-served basis.
This meeting is physically accessible
to people with disabilities. Requests for
VerDate Sep<11>2014
19:41 Nov 09, 2015
Jkt 238001
sign language interpretation or other
auxiliary aids should also be directed to
the Designated Federal Official as soon
as known, and preferably two weeks
prior to the meeting.
Due to increased security and for
access to the meeting, please call 301–
763–9906 upon arrival at the Census
Bureau on the day of the meeting. A
photo ID must be presented in order to
receive your visitor’s badge. Visitors are
not allowed beyond the first floor.
Dated: November 4, 2015.
John H. Thompson,
Director, Bureau of the Census.
[FR Doc. 2015–28557 Filed 11–9–15; 8:45 am]
BILLING CODE 3510–07–P
DEPARTMENT OF COMMERCE
Foreign-Trade Zones Board
[B–71–2015]
Notification of Proposed Production
Activity ASA Electronics, LLC Subzone
125D (Motor Vehicle Audio-Visual
Products) Elkhart, Indiana
The St. Joseph County Airport
Authority, grantee of FTZ 125,
submitted a notification of proposed
production activity to the FTZ Board on
behalf of ASA Electronics, LLC (ASA),
operator of Subzone 125D, for ASA’s
facility located in Elkhart, Indiana. The
notification conforming to the
requirements of the regulations of the
FTZ Board (15 CFR 400.22) was
received on October 21, 2015.
ASA already has authority to produce
motor vehicle radio/cassette players,
radio/compact disc players, compact
disc players, speakers, video
observation systems, TV/video cassette
recorder/digital video disk
entertainment systems, and flip down
video screens within Subzone 125D.
The current request would add new
finished products and foreign-status
materials and components to the scope
of authority. Pursuant to 15 CFR
400.14(b), FTZ activity would be limited
to the specific foreign-status
components and specific finished
products described in the submitted
notification (as described below) and
subsequently authorized by the FTZ
Board.
Production under FTZ procedures
could exempt ASA from customs duty
payments on the foreign status materials
and components used in export
production. On its domestic sales, ASA
would be able to choose the duty rates
during customs entry procedures that
apply to: Microphones; audio speakers;
amplifiers; digital video disk (DVD)
PO 00000
Frm 00005
Fmt 4703
Sfmt 9990
players; observation cameras; radios;
liquid crystal display (LCD) monitors;
television antennas; radar/navigation
antennas; power control systems;
camera switchers; public address
systems; insulated coaxial cables; and,
wire harnesses (duty rate ranges from
free to 5.3%) for the foreign-status
inputs noted below and in the existing
scope of authority. Customs duties also
could possibly be deferred or reduced
on foreign status production equipment.
The components sourced from abroad
include: plastic bags/packaging; foam
packaging; plastic radio housings/TV
cabinets/speaker grills; rubber gaskets;
paper insert packaging/retail box
packaging/manuals; steel bolts/screws;
zinc camera housings; metal brackets/
sleeves; camera receivers-wireless;
microphones; audio speakers/
amplifiers; subwoofer speakers; speaker
grills; DVD players; memory cards–SD;
wireless transmitters; observation
cameras; radios; rear view mirror
monitors; LCD monitors; TV antennas;
radar/navigation antennas; printed
circuit boards; TV tuners; fuses; power
filters; bulkhead coaxial camera
connectors; power control systems;
camera switchers; diodes and light
emitting diodes; public address systems;
insulated coaxial cables; and, wire
harnesses (duty rate ranges from free to
5.5%).
Public comment is invited from
interested parties. Submissions shall be
addressed to the FTZ Board’s Executive
Secretary at the address below. The
closing period for their receipt is
December 21, 2015.
A copy of the notification will be
available for public inspection at the
Office of the Executive Secretary,
Foreign-Trade Zones Board, Room
21013, U.S. Department of Commerce,
1401 Constitution Avenue NW.,
Washington, DC 20230–0002, and in the
‘‘Reading Room’’ section of the FTZ
Board’s Web site, which is accessible
via www.trade.gov/ftz.
For further information, contact Pierre
Duy at Pierre.Duy@trade.gov or (202)
482–1378.
Dated: November 3, 2015.
Elizabeth Whiteman,
Acting Executive Secretary.
[FR Doc. 2015–28669 Filed 11–9–15; 8:45 am]
BILLING CODE 3510–DS–P
E:\FR\FM\10NON1.SGM
10NON1
Agencies
[Federal Register Volume 80, Number 217 (Tuesday, November 10, 2015)]
[Notices]
[Page 69636]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2015-28669]
-----------------------------------------------------------------------
DEPARTMENT OF COMMERCE
Foreign-Trade Zones Board
[B-71-2015]
Notification of Proposed Production Activity ASA Electronics, LLC
Subzone 125D (Motor Vehicle Audio-Visual Products) Elkhart, Indiana
The St. Joseph County Airport Authority, grantee of FTZ 125,
submitted a notification of proposed production activity to the FTZ
Board on behalf of ASA Electronics, LLC (ASA), operator of Subzone
125D, for ASA's facility located in Elkhart, Indiana. The notification
conforming to the requirements of the regulations of the FTZ Board (15
CFR 400.22) was received on October 21, 2015.
ASA already has authority to produce motor vehicle radio/cassette
players, radio/compact disc players, compact disc players, speakers,
video observation systems, TV/video cassette recorder/digital video
disk entertainment systems, and flip down video screens within Subzone
125D. The current request would add new finished products and foreign-
status materials and components to the scope of authority. Pursuant to
15 CFR 400.14(b), FTZ activity would be limited to the specific
foreign-status components and specific finished products described in
the submitted notification (as described below) and subsequently
authorized by the FTZ Board.
Production under FTZ procedures could exempt ASA from customs duty
payments on the foreign status materials and components used in export
production. On its domestic sales, ASA would be able to choose the duty
rates during customs entry procedures that apply to: Microphones; audio
speakers; amplifiers; digital video disk (DVD) players; observation
cameras; radios; liquid crystal display (LCD) monitors; television
antennas; radar/navigation antennas; power control systems; camera
switchers; public address systems; insulated coaxial cables; and, wire
harnesses (duty rate ranges from free to 5.3%) for the foreign-status
inputs noted below and in the existing scope of authority. Customs
duties also could possibly be deferred or reduced on foreign status
production equipment.
The components sourced from abroad include: plastic bags/packaging;
foam packaging; plastic radio housings/TV cabinets/speaker grills;
rubber gaskets; paper insert packaging/retail box packaging/manuals;
steel bolts/screws; zinc camera housings; metal brackets/sleeves;
camera receivers-wireless; microphones; audio speakers/amplifiers;
subwoofer speakers; speaker grills; DVD players; memory cards-SD;
wireless transmitters; observation cameras; radios; rear view mirror
monitors; LCD monitors; TV antennas; radar/navigation antennas; printed
circuit boards; TV tuners; fuses; power filters; bulkhead coaxial
camera connectors; power control systems; camera switchers; diodes and
light emitting diodes; public address systems; insulated coaxial
cables; and, wire harnesses (duty rate ranges from free to 5.5%).
Public comment is invited from interested parties. Submissions
shall be addressed to the FTZ Board's Executive Secretary at the
address below. The closing period for their receipt is December 21,
2015.
A copy of the notification will be available for public inspection
at the Office of the Executive Secretary, Foreign-Trade Zones Board,
Room 21013, U.S. Department of Commerce, 1401 Constitution Avenue NW.,
Washington, DC 20230-0002, and in the ``Reading Room'' section of the
FTZ Board's Web site, which is accessible via www.trade.gov/ftz.
For further information, contact Pierre Duy at Pierre.Duy@trade.gov
or (202) 482-1378.
Dated: November 3, 2015.
Elizabeth Whiteman,
Acting Executive Secretary.
[FR Doc. 2015-28669 Filed 11-9-15; 8:45 am]
BILLING CODE 3510-DS-P