February 19, 2014 – Federal Register Recent Federal Regulation Documents
Results 101 - 106 of 106
Airworthiness Directives; Bombardier, Inc. Airplanes
We are adopting a new airworthiness directive (AD) for certain Bombardier, Inc. Model CL-600-1A11 (CL-600), CL-600-2A12 (CL-601), and CL-600-2B16 (CL-601-3A, CL-601-3R, and CL-604 Variants) airplanes. This AD requires repetitive inspections for fractured or incorrectly oriented fasteners on the inboard flap hinge-box forward fittings on both wings, and fastener replacement if necessary. This AD was prompted by two reports of fractured fastener heads found on the inboard flap hinge-box forward fitting. We are issuing this AD to detect and correct incorrectly oriented or fractured fasteners, which could result in detachment of the flap hinge-box and the flap surface, and consequent reduced controllability of the airplane.
Airworthiness Directives; Airbus Helicopters (Type Certificate Previously Held by Eurocopter France)
We are adopting a new airworthiness directive (AD) for certain Airbus Model AS332C, AS332L, AS332L1, AS332L2, and SA330J helicopters. This AD requires inspecting the crimping of the ball joint of the upper- and lower- end-fittings of the main servo-control and, depending on findings, replacing the main servo-control or repairing the ball joint. This AD was prompted by incidents of missing crimping on the ball joints of servo-control end-fittings. The actions of this AD are intended to prevent failure of a main servo-control upper end fitting, and subsequent failure of the flight controls and loss of control of the helicopter.
Airworthiness Directives; Various Restricted Category Helicopters
We are adopting a new airworthiness directive (AD) for various restricted category helicopters, originally manufactured by Bell Helicopter Textron, Inc. (Bell), model numbers HH-1K, TH-1F, TH-1L, UH- 1A, UH-1B, UH-1E, UH-1F, UH-1H, UH-1L, and UH-1P. This AD requires inspecting the tail rotor (T/R) cable assembly for an incorrectly machined body. This AD is prompted by a report from Bell that a defective body on the cable prevents the barrel assembly from fully engaging in the body cavity. These actions are intended to prevent disengagement of the cable from the barrel, failure of the T/R pitch control, and subsequent loss of control of the helicopter.
Airworthiness Directives; Bell Helicopter Textron, Inc. (Bell) Helicopters
We are adopting a new airworthiness directive (AD) for Bell Model 204B helicopters with a certain cable assembly installed. This AD requires inspecting the tail rotor (T/R) cable assembly for an incorrectly machined body. This AD is prompted by a report from Bell that a defective body on the cable prevents the barrel assembly from fully engaging in the body cavity. These actions are intended to prevent disengagement of the cable from the barrel, failure of the T/R pitch control, and subsequent loss of control of the helicopter.
Airworthiness Directives; ATR-GIE Avions de Transport Régional Airplanes
We are adopting a new airworthiness directive (AD) for certain ATRGIE Avions de Transport R[eacute]gional Model ATR42 and Model ATR72 airplanes. This AD was prompted by reports of defective sealing between the nacelle lower fairing and the underwing box. This AD requires a one-time general visual inspection for damaged (worn, torn, or abraded) or missing seals between the nacelle lower fairing and the underwing box of both the left-hand and right-hand engine nacelles, and replacement of the seal and/or shims if necessary. We are issuing this AD to prevent the decrease of the fire extinguishing agent efficiency, which could delay fire extinction and allow fire propagation out of the nacelle fire protected area, resulting in damage to the airplane.
Fisheries off West Coast States; Pacific Coast Groundfish Fishery Management Plan; Trawl Rationalization Program; Catch Monitor Program; Observer Program
This action would revise Pacific Coast Groundfish Fishery regulations pertaining to certified catch monitors and certified observers required for vessels in the Shorebased Individual Fishery Quota Program, the Mothership Coop Program, the Catcher/Processor Coop Program, and for processing vessels in the fixed gear or open access fisheries. This action also specifies permitting requirements for persons interested in providing certified observers and certified catch monitor services; updates observer provider and vessels responsibilities relative to observer safety; makes minor revisions relative to administration of the programs, and proposes numerous housekeeping measures. This action affects individuals serving as certified catch monitors and observers, persons that provide certified catch monitors and observers, vessels that are required to carry certified observers, and persons that are required to employ the services of certified catch monitors.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
