June 27, 2011 – Federal Register Recent Federal Regulation Documents

Results 101 - 113 of 113
Office of Hazardous Materials Safety; Notice of Applications for Modification of Special Permit
Document Number: 2011-15786
Type: Notice
Date: 2011-06-27
Agency: Pipeline and Hazardous Materials Safety Administration, Department of Transportation
In accordance with the procedures governing the application for, and the processing of, special permits from the Department of Transportation's Hazardous Material Regulations (49 CFR part 107, subpart B), notice is hereby given that the Office of Hazardous Materials Safety has received the applications described herein. This notice is abbreviated to expedite docketing and public notice. Because the sections affected, modes of transportation, and the nature of application have been shown in earlier Federal Register publications, they are not repeated here. Requests for modification of special permits (e.g. to provide for additional hazardous materials, packaging design changes, additional mode of transportation, etc.) are described in footnotes to the application number. Application numbers with the suffix ``M'' denote a modification request. These applications have been separated from the new application for special permits to facilitate processing.
Application of Cargo Preference Requirements To Maritime Loan Guarantee Program
Document Number: 2011-15743
Type: Notice
Date: 2011-06-27
Agency: Maritime Administration, Department of Transportation
This notice clarifies MARAD's position on the application of cargo preference requirements under 46 U.S.C. 55305 to its shipyard and vessel financing guarantees.
Airworthiness Directives; Airbus Model A318, A319, A320, and A321 Series Airplanes
Document Number: 2011-15683
Type: Rule
Date: 2011-06-27
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for the products listed above that would supersede an existing AD. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Learjet Inc. Model 45 Airplanes
Document Number: 2011-15579
Type: Rule
Date: 2011-06-27
Agency: Federal Aviation Administration, Department of Transportation
We are superseding an existing airworthiness directive (AD) for the products listed above. That AD currently requires, for certain airplanes, repetitive inspections for chafing and other damage of the case drain tube from the hydraulic pump case installed on the left-hand engine, and corrective action if necessary. That AD also requires, for all airplanes, repetitive inspections for discrepancies of the left engine's nacelle tubing, repetitive inspections for evidence of fluid leakage within the left engine accessory compartment, and corrective actions if necessary. This new AD also requires replacing the left engine fuel and hydraulic tubing and installing a tubing support channel, which terminates the repetitive inspections required in the existing AD. This new AD also removes airplanes from the applicability. This AD was prompted by reports of chafed hydraulic tubes in the left- hand engine. We are issuing this AD to prevent chafed hydraulic tubes in the left-hand engine and consequent hydraulic tube failure and uncontrolled loss of flammable fluid within the engine cowling, which could result in a fire in the engine nacelle and loss of control of the airplane.
Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
Document Number: 2011-15398
Type: Rule
Date: 2011-06-27
Agency: Federal Aviation Administration, Department of Transportation
This establishes, amends, suspends, or revokes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
Document Number: 2011-15395
Type: Rule
Date: 2011-06-27
Agency: Federal Aviation Administration, Department of Transportation
This rule establishes, amends, suspends, or revokes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Airworthiness Directives; Empresa Brasileira de Aeronautica S.A. (EMBRAER) Model EMB-120, -120ER, -120FC, -120QC, and -120RT Airplanes
Document Number: 2011-15369
Type: Rule
Date: 2011-06-27
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Bombardier, Inc. Model DHC-8-400 Series Airplanes
Document Number: 2011-15367
Type: Rule
Date: 2011-06-27
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Airbus Model A330-200 and -300 Series Airplanes
Document Number: 2011-15366
Type: Rule
Date: 2011-06-27
Agency: Federal Aviation Administration, Department of Transportation
We are superseding an existing airworthiness directive (AD) that applies to the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as: * * * * * The airworthiness limitations applicable to the Certification Maintenance Requirements (CMR) are given in Airbus A330 ALS Part 3, which is approved by the European Aviation Safety Agency (EASA). The revision 03 of Airbus A330 ALS Part 3 introduces more restrictive maintenance requirements and/or airworthiness limitations. Failure to comply with this revision constitutes an unsafe condition. * * * * * The unsafe condition is safety-significant latent failures that would, in combination with one or more other specific failures or events, result in a hazardous or catastrophic failure condition. We are issuing this AD to require actions to correct the unsafe condition on these products.
Airworthiness Directives; Bombardier, Inc. Model DHC-8-400 Series Airplanes
Document Number: 2011-15364
Type: Rule
Date: 2011-06-27
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Broker-Dealer Reports
Document Number: 2011-15341
Type: Proposed Rule
Date: 2011-06-27
Agency: Securities and Exchange Commission, Agencies and Commissions
The Securities and Exchange Commission (the ``Commission'') is proposing amendments to the broker-dealer financial reporting rule under the Securities Exchange Act of 1934 (the ``Exchange Act''). The first set of amendments would, among other things, update the existing requirements of Exchange Act Rule 17a-5, facilitate the ability of the Public Company Accounting Oversight Board (the ``PCAOB'') to implement oversight of independent public accountants of broker-dealers as required by the Dodd-Frank Wall Street Reform and Consumer Protection Act (the ``Dodd-Frank Act''), and eliminate potentially redundant requirements for certain broker-dealers affiliated with, or dually- registered as, investment advisers. The second set of amendments would require broker-dealers that either clear transactions or carry customer accounts to consent to allowing the Commission and designated examining authorities (``DEAs'') to have access to independent public accountants to discuss their findings with respect to annual audits of the broker- dealers and to review related audit documentation. The third set of amendments would enhance the ability of the Commission and examiners of a DEA to oversee broker-dealers' custody practices by requiring broker- dealers to file a new Form Custody.
Energy Conservation Program: Energy Conservation Standards for Residential Furnaces and Residential Central Air Conditioners and Heat Pumps
Document Number: 2011-14557
Type: Rule
Date: 2011-06-27
Agency: Department of Energy
The Energy Policy and Conservation Act of 1975 (EPCA), as amended, prescribes energy conservation standards for various consumer products and certain commercial and industrial equipment, including residential furnaces and residential central air conditioners and heat pumps. EPCA also requires the U.S. Department of Energy (DOE) to determine whether more-stringent, amended standards for these products would be technologically feasible and economically justified, and would save a significant amount of energy. In this direct final rule, DOE adopts amended energy conservation standards for residential furnaces and for residential central air conditioners and heat pumps. A notice of proposed rulemaking that proposes identical energy efficiency standards is published elsewhere in this issue of the Federal Register. If DOE receives adverse comment and determines that such comment may provide a reasonable basis for withdrawing the direct final rule, this final rule will be withdrawn, and DOE will proceed with the proposed rule.
Energy Conservation Program: Energy Conservation Standards for Residential Furnaces and Residential Central Air Conditioners and Heat Pumps
Document Number: 2011-14556
Type: Proposed Rule
Date: 2011-06-27
Agency: Department of Energy
The Energy Policy and Conservation Act of 1975 (EPCA), as amended, prescribes energy conservation standards for various consumer products and certain commercial and industrial equipment, including residential furnaces and residential central air conditioners and heat pumps. EPCA also requires the U.S. Department of Energy (DOE) to determine whether more-stringent, amended standards for these products would be technologically feasible and economically justified, and would save a significant amount of energy. In this notice, DOE proposes energy conservation standards for residential furnaces and for residential central air conditioners and heat pumps identical to those set forth in a direct final rule published elsewhere in today's Federal Register. If DOE receives adverse comment and determines that such comment may provide a reasonable basis for withdrawing the direct final rule, DOE will publish a notice withdrawing the direct final rule and will proceed with this proposed rule.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.