July 13, 2010 – Federal Register Recent Federal Regulation Documents

In this document, the Commission adopts an interim rule

We propose to adopt a new airworthiness directive (AD) for the products listed above that would supersede an existing AD. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as: Analysis performed in the frame of the Extended Service Goal has led Airbus to modify the inspection programme [modification of thresholds, intervals and associated configurations] which is currently required by DGAC (Direction G[eacute]n[eacute]rale de l'Aviation Civile) France AD F-2005-001. This modified inspection programme is necessary to detect and prevent damage associated with a structural fatigue phenomenon of the rear spar internal angle and the tee fitting located in the centre wing box. This condition, if not corrected, could affect the structural integrity of the centre wing box. The unsafe condition is reduced structural integrity of the wings. The proposed AD would require actions that are

NMFS is prohibiting directed fishing for northern rockfish in the Western Regulatory Area of the Gulf of Alaska (GOA). This action is necessary to prevent exceeding the 2010 total allowable catch (TAC) of northern rockfish in the Western Regulatory Area of the GOA.

The Copyright Royalty Judges are publishing for comment negotiated royalty rates for the satellite carrier statutory license of the Copyright Act for the license period 2010-2014.

NMFS proposes to amend regulations that govern fisheries managed under the Western Alaska Community Development Quota (CDQ) Program. These revisions are needed to comply with certain changes made to the Magnuson-Stevens Fishery Conservation and Management Act (Magnuson-Stevens Act) in 2006. Proposed changes include revising regulations associated with recordkeeping, vessel licensing, catch retention requirements, and fisheries observer requirements to ensure that they are no more restrictive than the regulations in effect for comparable non-CDQ fisheries managed under individual fishing quotas or cooperative allocations. In addition, NMFS proposes to remove CDQ Program regulations that now are inconsistent with the Magnuson-Stevens Act, including regulations associated with the CDQ allocation process, transfer of groundfish CDQ and halibut prohibited species quota, and the oversight of CDQ groups' expenditures.

DoD is issuing an interim rule amending the Defense Federal Acquisition Regulation Supplement (DFARS) to implement section 814 of the National Defense Authorization Act for Fiscal Year 2010.

DoD is issuing an interim rule amending the Defense Federal Acquisition Regulation Supplement (DFARS) to bring DoD into compliance with OMB implementation of the Prompt Payment Act by exempting military contingencies, and certain payments related to emergencies and the release or threatened release of hazardous substances.

This proposed rule would amend the Federal Manufactured Home Construction and Safety Standards by adopting certain recommendations made to HUD by the Manufactured Housing Consensus Committee (MHCC). The National Manufactured Housing Construction and Safety Standards Act of 1974 (the Act) requires HUD to publish in the Federal Register all proposed revised construction and safety standards (Construction and Safety Standards, or Standards) submitted by the MHCC. The MHCC has prepared and submitted to HUD its second group of recommendations to improve various aspects of the Construction and Safety Standards. HUD has reviewed those proposals and has made several editorial revisions to the proposals, and those revisions have been reviewed and accepted by the MHCC.

The FAA is adopting a new airworthiness directive (AD) for McCauley Propeller Systems model 4HFR34C653/L106FA propellers. This AD requires a onetime fluorescent penetrant inspection (FPI) and eddy current inspection (ECI) of the propeller hub for cracks. This AD results from reports of 10 hubs found cracked during propeller overhaul. We are issuing this AD to prevent failure of the propeller hub, which could cause blade separation, damage to the airplane, and loss of control of the airplane.

We are adopting a new airworthiness directive (AD) for certain Model 747-100, 747-100B, 747-100B SUD, 747-200B, 747-200C, 747-200F, 747-300, 747-400, 747SR, and 747SP series airplanes. This AD requires repetitive detailed inspections of certain overwing intercostal webs, and related investigative and corrective actions if necessary. This AD results from reports of cracks in overwing intercostal webs. We are issuing this AD to detect and correct such cracking, which could grow and result in a severed intercostal. If an intercostal is severed, cracks could develop in the adjacent frame structure and skin, resulting in a rapid loss of cabin pressure.

We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by the aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:

We are adopting a new airworthiness directive (AD) for certain Model 777 airplanes. This AD requires inspecting the bolt, nut, and downstop of the slat track assembly to determine if the bolt, nut, or stops are missing and to determine if the thread protrusion of the bolt from the nut is within specified limits and parts are correctly installed, and related investigative and corrective actions if necessary. For certain airplanes, this AD also requires inspecting the slat cans at the outboard slat number 3 and 12 outboard main track locations for holes and wear damage, and corrective actions if necessary; and replacing the downstop hardware for the outboard slats number 3 and 12 outboard and inboard main track locations. This AD results from a report of a hole in the inboard main track slat can for outboard slat number 12 on a Model 777 airplane. The hole was caused when the bolt securing the downstop migrated out of the fitting and contacted the slat can. We are issuing this AD to detect and correct damage to the outboard slat main track slat cans, which can allow fuel leakage into the fixed wing leading edge in excess of the capacity of the draining system. Excess fuel leakage could result in an uncontained fire.

We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:

This final rule amends the Federal regulations on the Procedures for Abatement of Highway Traffic Noise and Construction Noise. The final rule clarifies and adds definitions, the applicability of this regulation, certain analysis requirements, and the use of Federal funds for noise abatement measures.