Federal Motor Carrier Safety Administration September 23, 2016 – Federal Register Recent Federal Regulation Documents

Hours of Service of Drivers; Parts and Accessories: ArcelorMittal Indiana Harbor, LLC, Application for Exemptions
Document Number: 2016-22963
Type: Rule
Date: 2016-09-23
Agency: Federal Motor Carrier Safety Administration, Department of Transportation
FMCSA announces its decision to grant ArcelorMittal Indiana Harbor, LLC (ArcelorMittal) exemptions from the hours of service (HOS) and parts and accessories rules. One exemption will allow ArcelorMittal's employee-drivers with commercial driver's licenses (CDLs) who transport steel coils between their production and shipping locations on public roads to work up to 16 hours per day and return to work with less than the mandatory 10 consecutive hours off duty. The other exemption will allow ArcelorMittal to use coil carriers that do not meet the ``heavy hauler trailer'' definition, height of rear side marker lights restrictions, tire loading restrictions, and the coil securement requirements.
Commercial Driver's License Standards: Application for Exemption; CRST Expedited
Document Number: 2016-22961
Type: Notice
Date: 2016-09-23
Agency: Federal Motor Carrier Safety Administration, Department of Transportation
FMCSA announces its decision to grant CRST Expedited (CRST) an exemption from the regulation that requires a commercial learner's permit (CLP) holder to be accompanied by a commercial driver's license (CDL) holder with the proper CDL class and endorsements, seated in the front seat of the vehicle while the CLP holder performs behind-the- wheel training on public roads or highways. Under the terms and conditions of this exemption, a CLP holder who has documentation of passing the CDL skills test may drive a commercial motor vehicle (CMV) for CRST without being accompanied by a CDL holder in the front seat of the vehicle. The exemption enables CLP holders to drive as part of a team and have the same regulatory flexibility as CRST team drivers with CDLs. FMCSA has analyzed the exemption application and the public comments and has determined that the exemption, subject to the terms and conditions imposed, will achieve a level of safety that is equivalent to, or greater than, the level that would be achieved absent such exemption.
Parts and Accessories Necessary for Safe Operation; Windshield-Mounted Technologies
Document Number: 2016-22923
Type: Rule
Date: 2016-09-23
Agency: Federal Motor Carrier Safety Administration, Department of Transportation
FMCSA amends the Federal Motor Carrier Safety Regulations (FMCSRs) to allow the voluntary mounting of certain devices on the interior of the windshields of commercial motor vehicles (CMVs), including placement within the area that is swept by the windshield wipers. Section 5301 of the Fixing America's Surface Transportation (FAST) Act directs the Agency to amend the FMCSRs to allow devices to be mounted on the windshield that utilize ``vehicle safety technology,'' as defined in the Act. In addition, the section 5301 states that all windshield mounted devices/technologies with a limited 2-year exemption in effect on the date of enactment, shall be considered to meet the equivalent-or-greater safety standard required for the initial exemption. Promulgation of this final rule is a nondiscretionary, ministerial action that does not require prior notice and public comment under the Administrative Procedure Act (APA).