Federal Aviation Administration February 15, 2024 – Federal Register Recent Federal Regulation Documents

Airworthiness Directives; Bombardier, Inc., Airplanes
Document Number: 2024-03047
Type: Rule
Date: 2024-02-15
Agency: Federal Aviation Administration, Department of Transportation
The FAA is adopting a new airworthiness directive (AD) for all Bombardier, Inc., Model BD-100-1A10 airplanes. This AD was prompted by a report of a steering control unit (SCU) filter plate connector that does not meet the certification requirements for exposure of electronic components to high intensity radiated field environments, which could result in malfunction of the nose wheel steering (NWS) system. This AD requires determining if the SCU is an affected SCU, replacing all affected SCUs, and rigging and testing the NWS control. This AD also prohibits installing an affected SCU on any airplane. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; The Boeing Company Airplanes
Document Number: 2024-03082
Type: Rule
Date: 2024-02-15
Agency: Federal Aviation Administration, Department of Transportation
The FAA is adopting a new airworthiness directive (AD) for certain The Boeing Company Model 747-8 and 747-8F series airplanes. This AD was prompted by a report that all six Integrated Display Units (IDUs) became blank when new flight plan data was entered in the Flight Management System (FMS), and by a determination that indication of decaying airspeed in certain scenarios is required. This AD requires installing updated software. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; De Havilland Aircraft of Canada Limited (Type Certificate Previously Held by Bombardier, Inc.) Airplanes
Document Number: 2024-03081
Type: Rule
Date: 2024-02-15
Agency: Federal Aviation Administration, Department of Transportation
The FAA is adopting a new airworthiness directive (AD) for certain De Havilland Aircraft of Canada Limited Model DHC-8-401 and - 402 airplanes. This AD was prompted by reports that the saddle washer (radius filler) for the front and rear spar joints may have been incorrectly manufactured for several years. This AD requires inspecting the horizontal stabilizer to vertical joint for gaps and bending of the saddle washer and adjacent washers, and replacing parts if necessary. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus SAS Airplanes
Document Number: 2024-03080
Type: Rule
Date: 2024-02-15
Agency: Federal Aviation Administration, Department of Transportation
The FAA is superseding Airworthiness Directive (AD) 2019-16- 11, which applied to certain Airbus SAS Model A300 F4-605R and FR-622R airplanes. AD 2019-16-11 required repetitive high frequency eddy current (HFEC) inspections of the aft lower deck cargo door (LDCD) frame forks; a one-time check of the LDCD clearances; a one-time detailed visual inspection of hooks, eccentric bushes, and x-stops; and corrective actions if necessary. This AD was prompted by a determination that the threshold for the (repetitive) HFEC inspection needs to be corrected, and the LDCD frame forks modified. This AD continues to require the actions in AD 2019-16-11, requires correcting the HFEC inspection threshold and modifying the LDCD frame forks, and prohibits the installation of affected LDCDs under certain conditions; as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
Document Number: 2024-03134
Type: Rule
Date: 2024-02-15
Agency: Federal Aviation Administration, Department of Transportation
This rule amends, suspends, or removes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide for the safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Airworthiness Directives; Airbus Helicopters
Document Number: 2024-03137
Type: Rule
Date: 2024-02-15
Agency: Federal Aviation Administration, Department of Transportation
The FAA is adopting a new airworthiness directive (AD) for certain Airbus Helicopters Model EC225LP helicopters. This AD was prompted by a report of incorrect door opening instructions on the placards located on the right hand (RH) side of the VIP flap door. This AD requires installing a placard specifying jettisoning instructions, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
Document Number: 2024-03135
Type: Rule
Date: 2024-02-15
Agency: Federal Aviation Administration, Department of Transportation
This rule establishes, amends, suspends, or removes Standard Instrument Approach Procedures (SIAPS) and associated Takeoff Minimums and Obstacle Departure procedures (ODPs) for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Agency Information Collection Activities: Requests for Comments; Clearance of a Renewed Approval of Information Collection: Commercial Air Tour Limitations in the Grand Canyon National Park Special Flight Rules Area
Document Number: 2024-03194
Type: Notice
Date: 2024-02-15
Agency: Federal Aviation Administration, Department of Transportation
In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew an information collection. The FAA will use the information it collects and reviews to monitor compliance with the regulations regarding air tours in the Grand Canyon National Park.
Petition for Exemption; Summary of Petition Received; Bell Textron Inc.
Document Number: 2024-03198
Type: Notice
Date: 2024-02-15
Agency: Federal Aviation Administration, Department of Transportation
This notice contains a summary of a petition seeking relief from specified requirements of Federal Aviation Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, the FAA's exemption process. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.