Federal Aviation Administration March 16, 2022 – Federal Register Recent Federal Regulation Documents
Results 1 - 3 of 3
Airworthiness Directives; Goodrich Externally-Mounted Hoist Assemblies
The FAA is adopting a new airworthiness directive (AD) for various model helicopters with certain part-numbered Goodrich externally-mounted hoist assemblies (hoists) installed. This AD was prompted by hoists failing lower load limit inspections. This AD requires replacing unmodified hoists, installing placards, revising the existing Rotorcraft Flight Manual (RFM) for your helicopter, deactivating or removing a hoist if a partial peel out occurs, reviewing the helicopter's hoist slip load test records, repetitively inspecting the hoist cable and overload clutch (clutch), and reporting information to the manufacturer. This AD also requires establishing operating limitations on the hoist and prohibits installing an unmodified hoist. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; The Boeing Company Airplanes
The FAA is adopting a new airworthiness directive (AD) for all The Boeing Company Model 747-100, 747-100B, 747-100B SUD, 747-200B, 747-200C, 747-200F, 747-300, 747-400, 747-400D, and 747-400F series airplanes. This AD was prompted by a determination that radio altimeters cannot be relied upon to perform their intended function if they experience interference from wireless broadband operations in the 3.7-3.98 GHz frequency band (5G C-Band), and a recent determination that during takeoff, approach, landings, and go-arounds, as a result of this interference, certain airplane systems may not properly function, resulting in increased flightcrew workload while on approach with the flight director, autothrottle, or autopilot engaged, which could result in reduced ability of the flightcrew to maintain safe flight and landing of the airplane. This AD requires revising the limitations and operating procedures sections of the existing airplane flight manual (AFM) to incorporate specific operating procedures for takeoff, instrument landing system (ILS) approaches, non-precision approaches, and go-around and missed approaches, when in the presence of 5G C-Band interference as identified by Notices to Air Missions (NOTAMs). The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus Helicopters Deutschland GmbH Helicopters
The FAA is adopting a new airworthiness directive (AD) for all Airbus Helicopters Deutschland GmbH Model MBB-BK 117 D-3 helicopters. This AD was prompted by reports of a main rotor (M/R) blade lead-lag damper in a tilted position. This AD requires inspecting the Flex Control Unit (FCU), and corrective actions if necessary, as well as rework and re-identification of the bearing pin, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.