Federal Aviation Administration September 2021 – Federal Register Recent Federal Regulation Documents
Results 51 - 100 of 145
Proposed Establishment of Class E Airspace; Fulton, KY
This action proposes to establish Class E airspace extending upward from 700 feet above the surface for Fulton Airport, Fulton, KY, to accommodate new area navigation (RNAV) global positioning system (GPS) standard instrument approach procedures (SIAPs) serving this airport. Controlled airspace is necessary for the safety and management of instrument flight rules (IFR) operations in the area.
Proposed Amendment of Class E Airspace; Skaneateles, NY
This action proposes to amend Class E airspace extending upward from 700 feet above the surface at Skaneateles Aerodrome, Skaneateles, NY, to accommodate new area navigation (RNAV) global positioning system (GPS) standard instrument approach procedures (SIAPs) serving this airport, as well as updating the airport's name. Controlled airspace is necessary for the safety and management of instrument flight rules (IFR) operations in the area.
Agency Information Collection Activities: Requests for Comments; Clearance of Renewed Approval of Information Collection: Fractional Aircraft Ownership Programs
In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request Office of Management and Budget (OMB) approval to renew an information collection. Fractional Ownership is a program that offers increased flexibility in aircraft ownership. Owners purchase shares of an aircraft and agree to share their aircraft with others having an ownership share in that same aircraft. Owners agree to put their aircraft into a ``pool'' of other shared aircraft and to lease their aircraft to another owner in that pool. This collection is necessary to ensure compliance with relevant safety regulations.
Agency Information Collection Activities: Requests for Comments; Clearance of a Renewed Approval of Information Collection: Disclosure of Seat Dimensions To Facilitate the Use of Child Safety Seats on Airplanes During Passenger-Carrying Operations
In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew an information collection. The collection involves each passenger carrying air carrier operating under the Code of Federal Regulations to post on the internet website of the air carrier the maximum dimensions of a child safety seat that can be used on those aircraft. The information to be collected will be used to facilitate the use of child restraint systems onboard airplanes and is required by section 412 of the FAA Modernization and Reform Act of 2012.
COVID-19 Related Relief Concerning Operations at Chicago O'Hare International Airport, John F. Kennedy International Airport, Los Angeles International Airport, Newark Liberty International Airport, New York LaGuardia Airport, Ronald Reagan Washington National Airport, and San Francisco International Airport for the Winter 2021/2022 Scheduling Season
The FAA proposes to extend through March 26, 2022, the Coronavirus (COVID-19)-related limited, conditional waiver of the minimum slot usage requirement at John F. Kennedy International Airport (JFK), New York LaGuardia Airport (LGA), and Ronald Reagan Washington National Airport (DCA) that the FAA has already made available through October 30, 2021, for all international operations. Similarly, the FAA proposes to extend through March 26, 2022, its COVID-19-related limited, conditional policy for prioritizing flights canceled at designated International Air Transport Association (IATA) Level 2 airports in the United States, for purposes of establishing a carrier's operational baseline in the next corresponding season, for all international operations. These IATA Level 2 airports include Chicago O'Hare International Airport (ORD), Newark Liberty International Airport (EWR), Los Angeles International Airport (LAX), and San Francisco International Airport (SFO). This relief would be limited to slots and approved operating times used by any carrier for international operations only, through March 26, 2022, and would be subject to the same terms and conditions, with minor modifications, that the FAA has already applied to the relief that remains available through October 30, 2021. This notice invites stakeholders to submit comments with detailed supporting information relevant to FAA making a final decision. The FAA anticipates subsequently providing notice of its final decision.
Reassignment of Schedules at Newark-Liberty International Airport
By this notice, the U.S. Department of Transportation (Department or DOT), including the Federal Aviation Administration (FAA), provides notice of its intention to approve schedule plans, for a single low-cost carrier (LCC) or ultra-low-cost carrier (ULCC), to operate the 16 peak afternoon and evening runway timings previously approved for operation by Southwest Airlines, Inc. (Southwest) at Newark-Liberty International Airport (EWR or Newark). The Department is seeking comment on the proposed process as well as the proposed eligibility and evaluation criteria described below. Comments are due no later than September 27, 2021.
Airworthiness Directives; Rolls-Royce Deutschland Ltd & Co KG (Type Certificate Previously Held by Rolls-Royce plc) Turbofan Engines
The FAA is revising a notice of proposed rulemaking (NPRM) that applied to all Rolls-Royce Deutschland Ltd & Co KG (RRD) Trent 1000-A2, Trent 1000-AE2, Trent 1000-C2, Trent 1000-CE2, Trent 1000-D2, Trent 1000-E2, Trent 1000-G2, Trent 1000-H2, Trent 1000-J2, Trent 1000- K2, and Trent 1000-L2 model turbofan engines. This action revises the NPRM by requiring revision of the engine Time Limits Manual (TLM) life limits of certain critical rotating parts and direct accumulation counting (DAC) data files, as specified in a European Union Aviation Safety Agency (EASA) AD, which is proposed for incorporation by reference (IBR). The FAA is proposing this AD to address the unsafe condition on these products. Since these actions would impose an additional burden over those in the NPRM, the agency is requesting comments on this SNPRM.
Airworthiness Directives; Safran Helicopter Engines, S.A. (Type Certificate Previously Held by Turbomeca S.A.) Turboshaft Engines
The FAA proposes to supersede Airworthiness Directive (AD) 2005-12-08, which applies to Safran Helicopter Engines, S.A. (Safran Helicopter Engines) Arrius 2B1, 2B1A, 2B1A-1, and 2B2 model turboshaft engines. AD 2005-12-08 requires replacing the software in the engine electronic control unit (EECU). Since the FAA issued AD 2005-12-08, the manufacturer determined that certain previously affected EECUs are not subject to the unsafe condition identified in AD 2005-12-08. This proposed AD would retain the requirements of AD 2005-12-08 for engines with a certain EECU part number (P/N) installed. This proposed AD would also prohibit installation of an affected EECU onto any engine. The FAA is proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; Bell Textron Canada Limited (Type Certificate Previously Held by Bell Helicopter Textron Canada Limited) Helicopters
The FAA proposes to adopt a new airworthiness directive (AD) for certain Bell Textron Canada Limited (type certificate previously held by Bell Helicopter Textron Canada Limited) Model 505 helicopters. This proposed AD was prompted by the determination that reducing the pressure altitude limitations for certain fuel types is necessary. This proposed AD would require revising the existing Rotorcraft Flight Manal (RFM) for your helicopter. The FAA is proposing this AD to address the unsafe condition on these products.
NextGen Advisory Committee; Notice of Public Meeting
This notice announces a meeting of the NextGen Advisory Committee (NAC).
Drone Advisory Committee (DAC); Notice of Public Meeting
This notice announces a meeting of the Drone Advisory Committee.
Airworthiness Directives; General Electric Company Turbofan Engines
The FAA is adopting a new airworthiness directive (AD) for all General Electric Company (GE) CF34-8 model turbofan engines with a certain outer shell combustion liner (combustion outer liner shell) installed. This AD was prompted by two in-flight engine shutdowns (IFSDs) that occurred as a result of failures of the combustion outer liner shell. This AD requires a borescope inspection (BSI) or visual inspection of the combustion outer liner shell and, depending on the results of the inspection, possible replacement of the combustion outer liner shell. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; The Boeing Company Airplanes
The FAA is adopting a new airworthiness directive (AD) for all The Boeing Company Model 777 airplanes. This AD was prompted by a report that an operator found solid rivets with missing heads at the left buttock line 25 on the sloping pressure deck web. This AD requires doing a detailed inspection of the left- and right-side sloping pressure deck at certain stations for any damaged solid rivets, and applicable on-condition actions. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; DG Flugzeugbau GmbH Gliders
The FAA proposes to adopt a new airworthiness directive (AD) for all DG Flugzeugbau GmbH Models DG-500MB and DG-1000M gliders with a Solo Kleinmotoren GmbH Solo Model 2625 02i engine installed. This proposed AD was prompted by mandatory continuing airworthiness information (MCAI) issued by the aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as an error in the engine control unit (ECU) software. This proposed AD would require updating the ECU software. The FAA is proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; Gulfstream Aerospace Corporation Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for all Gulfstream Aerospace Corporation (Gulfstream) Models GV and GV- SP airplanes. This proposed AD was prompted by the omission of a life limit in the airworthiness limitations section (ALS) of the maintenance manual for a certain main landing gear (MLG) trunnion pin. This proposed AD would require revising the ALS of your existing instructions for continued airworthiness (ICA) or inspection program for the airplane to establish a life limit of 20,000 flight cycles for the affected MLG trunnion pin. The FAA is proposing this AD to address the unsafe condition on these products.
Proposed Amendment of VOR Federal Airways V-16, V-31, V-93, V-157, V-213, and V-229 in the Vicinity of Patuxent River, MD
The FAA is withdrawing the NPRM published in the Federal Register on July 12, 2017, proposing to amend VHF Omnidirectional Range (VOR) Federal airways V-16, V-31, V-93, V-157, V-213, and V-229 near Patuxent River, MD, due to the planned decommissioning of the Patuxent VOR/Tactical Air Navigation (VORTAC) (PXT), Patuxent River, MD, in support of the FAA's VOR Minimum Operational Network (MON) program. Subsequent to the NPRM, the PXT VORTAC decommissioning has been delayed until a to-be-determined date. The FAA decided that additional planning is necessary to ensure a more efficient implementation and integration with other ongoing VOR MON program activities, and determined that withdrawal of the proposed rule is warranted.
Airworthiness Directives; Daher Aerospace (Type Certificate Previously Held by SOCATA) Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for all Daher Aerospace (type certificate previously held by SOCATA) Models TB 20 and TB 21 airplanes. This AD was prompted by mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as cracks on the main landing gear (MLG) legs. This proposed AD would require repetitively inspecting the MLG and performing all applicable corrective actions. The FAA is proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; Pilatus Aircraft Ltd. Airplanes
The FAA proposes to supersede Airworthiness Directive (AD) 2012-06-16, which applies to all Pilatus Aircraft Ltd. (Pilatus) Models PC-6, PC-6-H1, PC-6-H2, PC-6/350, PC-6/350-H1, PC-6/350-H2, PC-6/A, PC- 6/A-H1, PC-6/A-H2, PC-6/B-H2, PC-6/B1-H2, PC-6/B2-H2, PC-6/B2-H4, PC-6/ C-H2, and PC-6/C1-H2 airplanes. AD 2012-06-16 requires installing a new rudder and elevator locking screw and modifying the installation of the rudder and elevator hinge bolt. Since the FAA issued AD 2012-06-16, the European Union Aviation Safety Agency (EASA) superseded its mandatory continuing airworthiness information (MCAI) to correct an unsafe condition on these products. This proposed AD would not retain any actions required by AD 2012-06-16 and would require inspecting and modifying the rudder, elevator, and right-hand (RH) aileron hinge bolt installations. The FAA is proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; Dassault Aviation Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Dassault Aviation Model FALCON 7X airplanes. This AD was prompted by a report of defects on the piston hole associated with the O2 saver feature that may prevent efficient deactivation of the O2 saver function. This AD requires amending the existing airplane flight manual (AFM) to incorporate a check and an operating limitation regarding the O2 saver function, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. This AD also limits the installation of affected parts under certain conditions. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Rolls-Royce Deutschland Ltd & Co KG (Type Certificate Previously Held by Rolls-Royce plc) Turbofan Engines
The FAA is superseding Airworthiness Directive (AD) 2020-15-12 for certain Rolls-Royce Deutschland Ltd & Co KG (RRD) Trent 1000 model turbofan engines. AD 2020-15-12 required initial and repetitive ultrasonic or visual inspections of the intermediate-pressure compressor (IPC) stage 1 rotor blade root (front face), IPC stage 2 rotor blade root (front and rear face), and IPC shaft stage 2 dovetail post (front face), and removal of any cracked parts from service. AD 2020-15-12 also required an inspection after asymmetric power and cabin depressurization events. This AD was prompted by IPC rotor blade separations resulting in engine failures. This AD requires initial and repetitive ultrasonic or visual inspections of certain IPC stage 1 rotor blade root, IPC stage 2 rotor blade root, and IPC shaft stage 2 dovetail posts until replacement of the IPC stage 1 and stage 2 rotor blades with redesigned IPC stage 1 and stage 2 rotor blades in kitted sets. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Piper Aircraft, Inc. Airplanes
The FAA proposes to supersede Airworthiness Directive (AD) 78- 02-03, which applies to all Piper Aircraft, Inc. (Piper), Model PA-23- 250 airplanes. AD 78-02-03 requires repetitively inspecting the stabilator tip tube and weight assemblies for cracks, inspecting for missing rivets and screws, replacing the forward rib/horn assemblies, and reinforcing the mounting. Since AD 78-02-03 was issued, Piper developed a newly-designed stabilator, which is not subject to the unsafe condition, and revised its service information. This proposed AD would retain the actions of AD 78-02-03, but would reduce the applicability and require the actions in the revised service information. The FAA is proposing this AD to address the unsafe condition on these products.
Petition for Exemption; Summary of Petition Received; Airlines for America, Cargo Airline Association, National Air Carrier Association, and Regional Airline Association
This notice contains a summary of a petition seeking relief from specified requirements of Federal Aviation Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, the FAA's exemption process. Neither publication of this notice nor the inclusion nor omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Airworthiness Directives; Yaborã Indústria Aeronáutica S.A. (Type Certificate Previously Held by Embraer S.A.) Airplanes
The FAA is superseding Airworthiness Directive (AD) 2020-26- 02, which applied to certain Yabor[atilde] Ind[uacute]stria Aeron[aacute]utica S.A. (type certificate previously held by Embraer S.A.) Model ERJ 190-400 airplanes. AD 2020-26-02 required amending the existing airplane flight manual (AFM) to incorporate a new limitation and revise certain normal procedures. This AD retains those requirements and also requires upgrading the electronic engine control (EEC) software, as specified in an Ag[ecirc]ncia Nacional de Avia[ccedil][atilde]o Civil (ANAC) AD, which is incorporated by reference. This AD was prompted by a report of an in-flight shutdown (IFSD) due in part to failure in the low-pressure compressor (LPC) rotor 1 during operation in high altitude at high thrust settings, and by the development of updated EEC software, which would terminate the requirement to amend the existing AFM. The FAA is issuing this AD to address the unsafe condition on these products.
Amendment of Class D and Class E Airspace; Belleville, IL
This action amends the Class D and Class E airspace at Scott AFB/MidAmerica St. Louis Airport, Belleville, IL. This action is due to the results of a biennial airspace review. The name of the airport is also being updated to coincide with the FAA's aeronautical database.
Airworthiness Directives; Fokker Services B.V. Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Fokker Services B.V. Model F28 Mark 0070 and Mark 0100 airplanes. This AD was prompted by a report of a crack found on the forward pressure bulkhead web plate, at the edge of a bonded doubler. This AD requires a one-time inspection of the forward bulkhead for cracking, repair if necessary, and a report of inspection results, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus SAS Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Airbus SAS Model A318, A319, A320, and A321 series airplanes. This AD was prompted by reports of low halon concentration in the forward and aft cargo compartments due to air leakage through cargo door seals, and the certification of improved cargo door seals. This AD requires repetitive cleaning and greasing of affected cargo door seals; replacing the forward, aft, and bulk cargo compartment door seals with new seals; and installing a placard on the forward, aft, and cargo compartment doors; and for certain airplanes, implementing an operational limitation for certain routes, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for certain Bombardier, Inc., Model CL-600-1A11 (600), CL-600-2A12 (601), and CL-600-2B16 (601-3A, 601-3R, and 604 Variants) airplanes. This proposed AD was prompted by a report of a wing stall (wing drop/ un-commanded roll) during a landing flare. This proposed AD would require revising the existing airplane flight manual (AFM) to incorporate a limitation and procedure for the wing anti-ice (WAI) system in order to mitigate the risk of ice accumulation on the wing leading edges. The FAA is proposing this AD to address the unsafe condition on these products.
Public Notice of Surplus Property Release; Spokane International Airport, Spokane, Washington
Notice is being given that the FAA is considering a request from the City of Spokane, Washington and the County of Spokane, Washington, to waive the surplus property requirements for approximately 2.9 acres of airport property located at Spokane International Airport, in Spokane, Washington. The subject property is located away from the aeronautical area and currently includes two existing city water reservoirs located in the southeast section of the business park. This release will allow the City and the County to sell a portion of 1 parcel of airport property to the City of Spokane and to construct an additional potable water reservoir. There will be proceeds generated from the proposed release of this property for capital improvements at the airport. The City and County will receive not less than fair market value for the property and the revenue generated from the sale will be used for airport purposes. It has been determined through study that the subject partial parcel will not be needed for aeronautical purposes.
Airworthiness Directives; Bombardier, Inc. Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for certain Bombardier, Inc., Model CL-600-1A11 (600), CL-600-2A12 (601), and CL-600-2B16 (601-3A, 601-3R, and 604 Variants) airplanes. This proposed AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. This proposed AD would require revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. The FAA is proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; Austro Engine GmbH Engines
The FAA proposes to supersede Airworthiness Directive (AD) 2021-09-04, which applies to all Austro Engine GmbH E4 and E4P model diesel piston engines. AD 2021-09-04 requires replacing a certain oil pump as well as the oil filter and engine oil. Since the FAA issued AD 2021-09-04, the FAA determined that the requirement to replace the oil pump should be limited to only Austro Engine E4 and E4P model diesel piston engines with a certain oil pump, identified by part number (P/N) and serial number (S/N), installed. This proposed AD would require replacing a certain oil pump, the oil filter, and the engine oil installed on Austro Engine GmbH E4 and E4P model diesel piston engines. The FAA is proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus Helicopters Deutschland GmbH Helicopters
The FAA proposes to adopt a new airworthiness directive (AD) for certain Airbus Helicopters Deutschland GmbH Model MBB-BK 117 D-2 helicopters. This proposed AD was prompted by a report of chafing marks on a wiring harness near the locking washer of the lateral control rod. This proposed AD would require an inspection of the wiring harness and the routing of the wiring harness and corrective actions if necessary, as specified in a European Union Aviation Safety Agency (EASA) AD, which is proposed for incorporation by reference (IBR). The FAA is proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; Bell Textron Canada Limited Helicopters
The FAA proposes to supersede Airworthiness Directive (AD) 2021-06-06, which applies to certain Bell Textron Canada Limited Model 505 helicopters. AD 2021-06-06 requires repetitive fluorescent penetrant inspections (FPIs) of the pilot collective stick and grip assembly and revising the existing Rotorcraft Flight Manual (RFM) for your helicopter. Since the FAA issued AD 2021-06-06, the pilot collective stick and grip assembly has been redesigned. This proposed AD would retain certain requirements of AD 2021-06-06, require modifying your helicopter to include the improved pilot collective stick tube and would add a terminating action for the repetitive FPIs. This proposed AD would also prohibit installing any pilot collective stick and grip assembly unless certain requirements of this proposed AD were met. The FAA is proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; Leonardo S.p.a. Helicopters
The FAA is revising an earlier proposal for certain Leonardo S.p.a. Model AB139 and AW139 helicopters. This action revises the notice of proposed rulemaking (NPRM) by expanding the required actions. This proposed AD would require various inspections of certain main rotor (MR) dampers, as specified in a European Aviation Safety Agency (now European Union Aviation Safety Agency) (EASA) AD, which is proposed for incorporation by reference (IBR). This proposed AD would also require reducing the torque of the MR damper hub attachment bolts, installing a special washer, installing a certain part-numbered MR damper, and prohibit installing other part-numbered MR dampers. The FAA is proposing this airworthiness directive (AD) to address the unsafe condition on these products. Since these actions would impose an additional burden over those in the NPRM, the FAA is requesting comments on this SNPRM.
Airworthiness Directives; Daher Aerospace (Type Certificate Previously Held by SOCATA) Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for certain Daher Aerospace (type certificate previously held by SOCATA) Model TBM 700 airplanes. This proposed AD was prompted by mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as a non-conforming dump switch ejecting from its slot. This proposed AD would require modifying certain dump switches. The FAA is proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; Bell Textron Canada Limited
The FAA proposes to adopt a new airworthiness directive (AD) for certain Bell Textron Canada Limited Model 206, 206A, 206A-1, 206B, 206B-1, 206L, 206L-1, 206L-3, and 206L-4 helicopters. This proposed AD was prompted by reports of cracked or missing nuts on the tail rotor drive shaft (TRDS) disc pack (Thomas) couplings. This proposed AD would require removing certain nuts from service, installing newly designed nuts, and applying a specific torque and a torque stripe to each newly installed nut. This proposed AD would then require, after the installation of each newly designed nut, inspecting the torque and, depending on the inspection results, either applying a torque stripe or performing further inspections and removing certain parts from service. Finally, this proposed AD would prohibit installing any affected nut on any TRDS Thomas coupling. The FAA is proposing this AD to address the unsafe condition on these products.
Petition for Exemption; Summary of Petition Received; Jenks Family Farms
This notice contains a summary of a petition seeking relief from specified requirements of Federal Aviation Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, FAA's exemption process. Neither publication of this notice nor the inclusion nor omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Petition for Exemption; Summary of Petition Received; FedEx Corporation
This notice contains a summary of a petition seeking relief from specified requirements of Federal Aviation Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, the FAA's exemption process. Neither publication of this notice nor the inclusion nor omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Petition for Exemption; Summary of Petition Received; ABC Drones, LLC
This notice contains a summary of a petition seeking relief from specified requirements of Federal Aviation Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, the FAA's exemption process. Neither publication of this notice nor the inclusion nor omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
This rule amends, suspends, or removes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide for the safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
This rule establishes, amends, suspends, or removes Standard Instrument Approach Procedures (SIAPS) and associated Takeoff Minimums and Obstacle Departure procedures (ODPs) for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Amendment of Class E Airspace; Courtland, AL
This action amends Class E airspace extending upward from 700 feet above the surface for Courtland Airport, Courtland, AL, by amending the name and geographical coordinates of Courtland Airport (formerly Industrial Airpark Airport).
Revocation of Class E Airspace and Amendment of Class E Airspace; Peebles and West Union, OH
This action revokes the Class E extending upward from 700 feet above the surface at Peebles, OH; and amends the Class E airspace extending upward from 700 feet above the surface at Alexander Salamon Airport, West Union, OH. This action is the result of airspace reviews caused by the decommissioning of the West Union non-federal non- directional beacon (NDB). The geographic coordinates of the Alexander Salamon Airport are also being updated to coincide with the FAA's aeronautical database.
Proposed Amendment Class E Airspace and Establishment of Class E; Greenville and Terrell, TX
This action proposes to amend the Class E airspace at Greenville, TX, and establish Class E airspace at Terrell, TX. The FAA is proposing this action as the result of airspace reviews due to the decommissioning of the Caddo Mills non-directional beacon (NDB). The geographic coordinates of Caddo Mills Municipal Airport, Caddo Mill, TX, would also be updated to coincide with the FAA's aeronautical database.
Airworthiness Directives; International Aero Engines, LLC Turbofan Engines
The FAA is adopting a new airworthiness directive (AD) for certain International Aero Engines, LLC (IAE) PW1122G-JM, PW1124G1-JM, PW1124G-JM, PW1127G1-JM, PW1127GA-JM, PW1127G-JM, PW1129G-JM, PW1130G- JM, PW1133GA-JM, and PW1133G-JM model turbofan engines. This AD was prompted by a root cause analysis of an event involving an uncontained failure of a high-pressure turbine (HPT) disk that resulted in high- energy debris penetrating the engine cowling on an Airbus Model A321- 231 airplane, powered by IAE V2533-A5 model turbofan engines. This AD requires removing certain HPT 1st-stage and HPT 2nd-stage disks from service. The FAA is issuing this AD to address the unsafe condition on these products.
Petition for Exemption; Summary of Petition Received; Alitalia Societa Aerea Italiana
This notice contains a summary of a petition seeking relief from specified requirements of Federal Aviation Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, the FAA's exemption process. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Petition for Exemption; Summary of Petition Received; Choose Aerospace, Inc.
This notice contains a summary of a petition seeking relief from specified requirements of Federal Aviation Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, the FAA's exemption process. Neither publication of this notice nor the inclusion nor omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
IFR Altitudes; Miscellaneous Amendments
This amendment adopts miscellaneous amendments to the required IFR (instrument flight rules) altitudes and changeover points for certain Federal airways, jet routes, or direct routes for which a minimum or maximum en route authorized IFR altitude is prescribed. This regulatory action is needed because of changes occurring in the National Airspace System. These changes are designed to provide for the safe and efficient use of the navigable airspace under instrument conditions in the affected areas.
Proposed Revocation of United States Area Navigation Routes Q-162 and Q-166; Bishop, CA
This action proposes to revoke United States Area Navigation (RNAV) routes Q-162 and Q-166 in the vicinity of Bishop, CA due to the establishment of a new RNAV route, Q-174, that provides better connectivity for the Las Vegas Terminal area arrivals.
Amendment of Class E Airspace; Monroe, NC
This action amends Class E airspace extending upward from 700 feet above the surface for Charlotte-Monroe Executive Airport, Monroe, NC. The FAA is taking this action as a result of the Charlotte Class B Biennial Review. This action also updates the airport's name to Charlotte-Monroe Executive Airport (formerly Monroe Airport). In addition, this action updates the geographic coordinates of the airport to coincide with the FAA's database. Controlled airspace is necessary for the safety and management of instrument flight rules (IFR) operations in the area.
Airworthiness Directives; The Boeing Company Airplanes
The FAA proposes to supersede Airworthiness Directive (AD) 2020-21-17, which applies to all The Boeing Company Model 757 airplanes. AD 2020-21-17 requires repetitive inspections for skin cracking and shim migration at the upper link drag fittings, diagonal brace cracking, and fastener looseness; and applicable on-condition actions. Since the FAA issued AD 2020-21-17, a determination has been made that the compliance times for certain groups are not adequate. This proposed AD would retain the requirements of AD 2020-21-17 with reduced compliance times for certain airplane groups. The FAA is proposing this AD to address the unsafe condition on these products.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.