Federal Aviation Administration October 1, 2019 – Federal Register Recent Federal Regulation Documents

Proposed Amendment of Class E Airspace; Redding, CA
Document Number: 2019-21286
Type: Proposed Rule
Date: 2019-10-01
Agency: Federal Aviation Administration, Department of Transportation
This action proposes to amend Class E airspace designated as an extension to a Class D or Class E surface area, and Class E airspace extending upward from 700 feet above the surface at Redding Municipal Airport, Redding CA. This action also proposes to remove Class E airspace extending upward from 1,200 feet above the surface as this airspace is wholly contained within the Rogue Valley en route airspace and duplication is not necessary. Additionally, this action proposes to update the geographic coordinates of the airport to match the FAA's database. Lastly, this action proposes to remove the Redding VOR/DME and the Lassen NDB and the extensions associated with those navigational aids from the legal description of the airspace. Removing the VOR/DME and NDB simplifies the airspace's legal description. These changes are necessary to accommodate airspace redesign for the safety and management of Instrument Flight Rules (IFR) operations at the airport.
Agency Information Collection Activities: Requests for Comments; Clearance of a New Approval of Information Collection: Pilot Reports (PIREP)
Document Number: 2019-21257
Type: Notice
Date: 2019-10-01
Agency: Federal Aviation Administration, Department of Transportation
In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval for a new information collection. The collection involves an aircraft pilot's voluntary submission of weather conditions that were encountered while in flight. The information to be collected is necessary because Pilot Report (PIREP) Solicitation and Dissemination has been identified by the ATO as one of the Top 5 hazards in the National Airspace System (NAS). For certain weather conditions, PIREPs are the only means of confirmation that forecasted conditions are occurring. The FAA 7110-2 PIREP Form is a guide to assist pilots in submitting Pilot Weather Reports into the NAS.
Airworthiness Directives; Airbus SAS Airplanes
Document Number: 2019-21241
Type: Rule
Date: 2019-10-01
Agency: Federal Aviation Administration, Department of Transportation
The FAA is superseding Airworthiness Directive (AD) 2018-22- 13, which applied to certain Airbus SAS Model A350-941 and -1041 airplanes. AD 2018-22-13 required revising the existing airplane flight manual (AFM) to provide the flightcrew with updated procedures related to inboard aileron fault operations. This AD continues to require that AFM revision, and also requires modification of the electronic centralized aircraft monitoring (ECAM) procedures by installing an Airbus temporary quick change (ATQC) and activating an ECAM temporary change. This AD was prompted by a technical issue detected on the inboard aileron electrohydrostatic actuators that caused potential erroneous monitoring of those actuators. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus SAS Airplanes
Document Number: 2019-21240
Type: Rule
Date: 2019-10-01
Agency: Federal Aviation Administration, Department of Transportation
The FAA is adopting a new airworthiness directive (AD) for all Airbus SAS Model A330-200 Freighter, A330-200, and A330-300 series airplanes. This AD was prompted by an analysis conducted on Airbus SAS Model A330-200 Freighter, A330-200, and A330-300 series airplanes that identified structural areas that are susceptible to widespread fatigue damage (WFD). This AD requires reinforcement modifications of various structural parts of the fuselage, and applicable related investigative and corrective actions if necessary, as specified in a European Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus SAS Airplanes
Document Number: 2019-21238
Type: Rule
Date: 2019-10-01
Agency: Federal Aviation Administration, Department of Transportation
The FAA is adopting a new airworthiness directive (AD) for certain Airbus SAS Model A330-202, -243, -243F, -302, -323, and -343 airplanes. This AD was prompted by a report that cracks have been found within the ring gears of the slat geared rotary actuators (SGRAs) due to a change in the manufacturing process and inadequate post-production non-destructive testing for potential cracking. This AD requires an inspection to determine the part number and serial number of the SGRAs, and replacement of each affected SGRA with a serviceable part, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus SAS Airplanes
Document Number: 2019-21237
Type: Rule
Date: 2019-10-01
Agency: Federal Aviation Administration, Department of Transportation
The FAA is adopting a new airworthiness directive (AD) for all Airbus SAS Model A300 series airplanes; Airbus SAS Model A300 B4-600, B4-600R, and F4-600R series airplanes, and Model A300 C4-605R Variant F airplanes (collectively called Model A300-600 series airplanes); and Airbus SAS Model A310 series airplanes. This AD was prompted by a report indicating that the trimmable horizontal stabilizer (THS) actuator ball nut trunnion lower attachment was missing parts. This AD requires a one-time detailed inspection of the THS actuator right-hand spherical bearing and retaining parts (bolt, tab washer, and end cap) for correct installation of the retaining parts and correct bolt position, and applicable corrective actions, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Fokker Services B.V. Airplanes
Document Number: 2019-21221
Type: Proposed Rule
Date: 2019-10-01
Agency: Federal Aviation Administration, Department of Transportation
The FAA proposes to adopt a new airworthiness directive (AD) for all Fokker Services B.V. Model F28 Mark 0100 airplanes. This proposed AD was prompted by reports of smoke in the flight deck, in conjunction with the loss of electrical power. This proposed AD would require replacement of affected generator power transfer contactors (GPTCs), essential bus transfer contactors (EBTCs), and auxiliary power transfer contactors (APTCs), as specified in a European Union Aviation Safety Agency (EASA) AD, which will be incorporated by reference. The FAA is proposing this AD to address the unsafe condition on these products.
Amendment of Class E Airspace; St. James, MN
Document Number: 2019-21195
Type: Rule
Date: 2019-10-01
Agency: Federal Aviation Administration, Department of Transportation
This action amends the Class E airspace extending upward from 700 feet above the surface at St. James Municipal Airport, St. James, MN. This action is due to an airspace review caused by the decommissioning of the Fairmont VHF omnidirectional range (VOR) navigation aid, which provided navigation information for the instrument procedures at this airport, as part of the VOR Minimum Operational Network (MON) Program. Airspace redesign is necessary for the safety and management of instrument flight rules (IFR) operations at this airport.
Proposed Amendment of VOR Federal Airways V-11 and V-275 in the Vicinity of Bryan, OH, and Defiance, OH, Respectively
Document Number: 2019-21194
Type: Proposed Rule
Date: 2019-10-01
Agency: Federal Aviation Administration, Department of Transportation
This action proposes to amend VHF Omnidirectional Range (VOR) Federal airways V-11 by redefining the EDGEE fix in the vicinity of Bryan, OH, and V-275 by redefining the KLOEE fix in the vicinity of Defiancé, OH. These modifications are necessary due to the planned decommissioning of the VOR portion of the Waterville, OH (VWV), VOR/ Distance Measuring Equipment (VOR/DME) navigation aid (NAVAID), which provides navigation guidance for portions of the affected air traffic service (ATS) routes. The Waterville VOR is being decommissioned as part of the FAA's VOR Minimum Operational Network (MON) program.
Amendment of Area Navigation (RNAV) Routes Q-121 and Q-156; Miles City, MT
Document Number: 2019-21193
Type: Rule
Date: 2019-10-01
Agency: Federal Aviation Administration, Department of Transportation
This action amends the legal descriptions of area navigation (RNAV) routes Q-121 and Q-156 by changing the name of one waypoint common to each route. Specifically, this action changes the TOUGH waypoint name to SWTHN in RNAV routes Q-121 and Q-156.
Airworthiness Directives; The Boeing Company Airplanes
Document Number: 2019-21187
Type: Proposed Rule
Date: 2019-10-01
Agency: Federal Aviation Administration, Department of Transportation
The FAA proposes to adopt a new airworthiness directive (AD) for certain The Boeing Company Model 737-600, -700, -700C, -800, and - 900 series airplanes. This proposed AD was prompted by reports of cracks in the bear strap between certain stations, sometimes common to fasteners in the gap cover and emanating from rough sanding marks found on the surface of the bear strap. This proposed AD would require inspections of the fuselage skin and bear strap at the forward galley door between certain stations for cracks, and applicable on-condition actions. The FAA is proposing this AD to address the unsafe condition on these products.
Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
Document Number: 2019-20991
Type: Rule
Date: 2019-10-01
Agency: Federal Aviation Administration, Department of Transportation
This rule establishes, amends, suspends, or removes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures (ODPs) for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
Document Number: 2019-20989
Type: Rule
Date: 2019-10-01
Agency: Federal Aviation Administration, Department of Transportation
This rule establishes, amends, suspends, or removes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures (ODPs) for operations at certain airports. These regulatory actions areneeded because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
Document Number: 2019-20988
Type: Rule
Date: 2019-10-01
Agency: Federal Aviation Administration, Department of Transportation
This rule amends, suspends, or removes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide for the safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
Document Number: 2019-20987
Type: Rule
Date: 2019-10-01
Agency: Federal Aviation Administration, Department of Transportation
This rule amends, suspends, or removes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide for the safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.