Federal Aviation Administration July 5, 2019 – Federal Register Recent Federal Regulation Documents

Commercial Space Transportation Advisory Committee-Charter Renewal
Document Number: 2019-14349
Type: Notice
Date: 2019-07-05
Agency: Federal Aviation Administration, Department of Transportation
FAA announces the renewal of the COMSTAC charter, a Federal Advisory Committee that provides information, advice, and recommendations to DOT and the FAA on the critical matters facing the U.S. commercial space transportation industry. This renewal will take effect the day of publication of this announcement, and will expire after 2 years.
Airworthiness Directives; Robinson Helicopter Company Helicopters
Document Number: 2019-14205
Type: Rule
Date: 2019-07-05
Agency: Federal Aviation Administration, Department of Transportation
The FAA is adopting a new airworthiness directive (AD) for Robinson Helicopter Company (Robinson) Model R44 II helicopters. This AD requires inspecting the engine air induction hose (hose) and replacing any hose that is not airworthy. This AD was prompted by multiple reports of separation between the outer and inner layers of the hoses. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Pilatus Aircraft Ltd. Airplanes
Document Number: 2019-14199
Type: Proposed Rule
Date: 2019-07-05
Agency: Federal Aviation Administration, Department of Transportation
The FAA proposes to adopt a new airworthiness directive (AD) for Pilatus Aircraft Ltd. Models PC-6, PC-6/350, PC-6/350-H1, PC-6/350- H2, PC-6/A, PC-6/A-H1, PC-6/A-H2, PC-6/B-H2, PC-6/B1-H2, PC-6/B2-H2, PC-6/B2-H4, PC-6/C-H2, PC-6/C1-H2, PC-6-H1, and PC-6-H2 airplanes. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as rudder shaft assemblies with incorrect rivet configuration. The FAA is proposing this AD to require actions that address the unsafe condition on these products.
Airworthiness Directives; Embraer S.A. Airplanes
Document Number: 2019-14192
Type: Proposed Rule
Date: 2019-07-05
Agency: Federal Aviation Administration, Department of Transportation
The FAA proposes to supersede Airworthiness Directive (AD) 2017-16-08, which applies to certain Embraer S.A. Model ERJ 190-100 STD, -100 LR, -100 IGW, and -100 ECJ airplanes; and Model ERJ 190-200 STD, -200 LR, and -200 IGW airplanes. AD 2017-16-08 requires revising the existing maintenance or inspection program, as applicable, to incorporate more restrictive airworthiness limitations. Since the FAA issued AD 2017-16-08, the FAA determined that new or more restrictive airworthiness limitations are necessary. This proposed AD would require revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. This proposed AD would also add airplanes to the applicability. The FAA is proposing this AD to address the unsafe condition on these products.
Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
Document Number: 2019-14133
Type: Rule
Date: 2019-07-05
Agency: Federal Aviation Administration, Department of Transportation
This rule amends, suspends, or removes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide for the safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
Document Number: 2019-14130
Type: Rule
Date: 2019-07-05
Agency: Federal Aviation Administration, Department of Transportation
This rule establishes, amends, suspends, or removes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures (ODPs) for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, addingnew obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
Document Number: 2019-14129
Type: Rule
Date: 2019-07-05
Agency: Federal Aviation Administration, Department of Transportation
This rule establishes, amends, suspends, or removes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures (ODPs) for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
Document Number: 2019-14128
Type: Rule
Date: 2019-07-05
Agency: Federal Aviation Administration, Department of Transportation
This rule amends, suspends, or removes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide for the safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.