Federal Aviation Administration October 30, 2012 – Federal Register Recent Federal Regulation Documents

Airworthiness Directives; The Boeing Company Airplanes
Document Number: 2012-26670
Type: Proposed Rule
Date: 2012-10-30
Agency: Federal Aviation Administration, Department of Transportation
We are revising an earlier proposed airworthiness directive (AD) for all The Boeing Company Model 757 airplanes. That NPRM proposed to require repetitive operational tests of the engine fuel suction feed of the fuel system, and other related testing if necessary. That NPRM was prompted by reports of two in-service occurrences on Model 737-400 airplanes of total loss of boost pump pressure of the fuel feed system, followed by loss of fuel system suction feed capability on one engine, and in-flight shutdown of the engine. This action revises that NPRM by proposing to require repetitive operational tests and corrective actions if necessary. We are proposing this supplemental NPRM to detect and correct loss of the engine fuel suction feed capability of the fuel system, which, in the event of total loss of the fuel boost pumps, could result in dual engine flameout, inability to restart the engines, and consequent forced landing of the airplane. Since these actions impose an additional burden over that proposed in the previous NPRM, we are reopening the comment period to allow the public the chance to comment on these proposed changes.
Petition for Exemption; Summary of Petition Received
Document Number: 2012-26623
Type: Notice
Date: 2012-10-30
Agency: Federal Aviation Administration, Department of Transportation
This notice contains a summary of a petition seeking relief from specified requirements of Title 14, Code of Federal Regulations (CFR) part 25. The purpose of this notice is to improve the public's awareness of, and participation in, this aspect of FAA's regulatory activities. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Petition for Exemption; Summary of Petition Received
Document Number: 2012-26584
Type: Notice
Date: 2012-10-30
Agency: Federal Aviation Administration, Department of Transportation
This notice contains a summary of a petition seeking relief from specified requirements of Title 14, Code of Federal Regulations (14 CFR). The purpose of this notice is to improve the public's awareness of, and participation in, this aspect of the FAA's regulatory activities. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Petition for Exemption; Summary of Petition Received
Document Number: 2012-26583
Type: Notice
Date: 2012-10-30
Agency: Federal Aviation Administration, Department of Transportation
This notice contains a summary of a petition seeking relief from specified requirements of 14 CFR. The purpose of this notice is to improve the public's awareness of, and participation in, this aspect of FAA's regulatory activities. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Petition for Exemption; Summary of Petition Received
Document Number: 2012-26582
Type: Notice
Date: 2012-10-30
Agency: Federal Aviation Administration, Department of Transportation
This notice contains a summary of a petition seeking relief from specified requirements of Title 14, Code of Federal Regulations (CFR) part 25. The purpose of this notice is to improve the public's awareness of, and participation in, this aspect of FAA's regulatory activities. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Petition for Exemption; Summary of Petition Received
Document Number: 2012-26581
Type: Notice
Date: 2012-10-30
Agency: Federal Aviation Administration, Department of Transportation
This notice contains a summary of a petition seeking relief from specified requirements of 14 CFR. The purpose of this notice is to improve the public's awareness of, and participation in, this aspect of the FAA's regulatory activities. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Airworthiness Directives; Bombardier, Inc. Airplanes
Document Number: 2012-26077
Type: Rule
Date: 2012-10-30
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for certain Bombardier, Inc. Model DHC-8-400 series airplanes. This AD was prompted by cases of on-ground failure of the screw cap or end cap of hydraulic accumulators on other airplane models, resulting in high-energy impact damage to adjacent systems and structure. This AD requires inspecting for a part number and replacing the affected parking brake hydraulic accumulator, and relocating the parking brake accumulator, on the subject airplanes. We are issuing this AD to prevent failure of the screw caps and/or end caps of the parking brake hydraulic accumulator, which could result in damage to the airplane's primary structures, with potential adverse effect on the airplane's controllability.
Airworthiness Directives; Bombardier, Inc. Airplanes
Document Number: 2012-26075
Type: Rule
Date: 2012-10-30
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for certain Bombardier, Inc. Model CL-600-2B16 (CL-601-3A, CL-601-3R, and CL-604 Variants) airplanes. This AD was prompted by reports of deformation at the neck of the pressure regulator body on the oxygen cylinder and regulator assemblies (CRAs), and an electrical wiring harness in the area of the oxygen cylinder with no protective conduit sleeving. This AD requires inspecting to determine if certain oxygen pressure regulators are installed and replacing oxygen CRAs containing pressure regulators that do not meet the required material properties. This AD also requires inspecting for damaged wiring, and repairing or replacing wiring if necessary. We are issuing this AD to prevent rupture of the oxygen cylinder, which in the case of cabin depressurization, would lead to oxygen not being available when required; and to detect and correct unprotected wiring that could chafe against the oxygen system components or surrounding structure in the area, and lead to electrical arcing and an oxygen-fed fire.
Airworthiness Directives; The Boeing Company Airplanes
Document Number: 2012-26074
Type: Rule
Date: 2012-10-30
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for certain The Boeing Company Model 777-200LR and -300ER series airplanes. This AD requires reviewing the airplane's maintenance records for each rudder power control unit (PCU) to identify the condition of its related reaction link assembly, and replacing the rudder PCU and its related reaction link assembly if necessary. This AD was prompted by a report of an abnormal airframe vibration in the aft fuselage during flight. We are issuing this AD to prevent excessive freeplay in the rudder control surface, which could cause rudder vibration, and result in structural damage severe enough to prevent continued safe flight and landing.
Airworthiness Directives; The Boeing Company Airplanes
Document Number: 2012-26073
Type: Rule
Date: 2012-10-30
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for certain The Boeing Company Model DC-9-81 (MD-81), DC-9-82 (MD-82), DC-9-83 (MD- 83), DC-9-87 (MD-87), and MD-88 airplanes. This AD was prompted by reports of fatigue cracks found in Stringer 11 at the outboard flap, inboard drive hinge at Station Xrs=164.000. This AD requires repetitive inspections for cracks in Stringer 11, and a splice repair if necessary; and repetitive post-repair inspections, and repair if necessary. We are issuing this AD to detect and correct such cracking, which could result in the wing structure not supporting the limit load condition, which could lead to loss of structural integrity of the wing.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.