Federal Aviation Administration July 12, 2006 – Federal Register Recent Federal Regulation Documents

Airworthiness Directives; Bombardier Model CL-600-2B19 (Regional Jet Series 100 & 440) Airplanes
Document Number: E6-10913
Type: Proposed Rule
Date: 2006-07-12
Agency: Federal Aviation Administration, Department of Transportation
The FAA proposes to supersede an existing airworthiness directive (AD) that applies to certain Bombardier Model CL-600-2B19 (Regional Jet Series 100 & 440) airplanes. The existing AD currently requires repetitive inspections for cracks, sealant damage, and corrosion of the main fittings of the main landing gear (MLG), and corrective actions if necessary. This proposed AD would reduce the compliance times for inspecting certain low-utilization airplanes, and provide a terminating action for the repetitive inspections. This proposed AD results from a report of a cracked main fitting of the MLG. We are proposing this AD to detect and correct fatigue cracking of the main fitting of the MLG and consequent failure of the main fitting, which could result in the collapse of the MLG.
Airworthiness Directives; Bombardier Model DHC-8-400 Series Airplanes
Document Number: E6-10912
Type: Proposed Rule
Date: 2006-07-12
Agency: Federal Aviation Administration, Department of Transportation
The FAA proposes to adopt a new airworthiness directive (AD) for certain Bombardier Model DHC-8-400 series airplanes. This proposed AD would require inspecting for fouling and chafing damage of the outboard brake control cable of the main landing gear, replacing the control cable if necessary, reworking the control cable cover, and, if applicable, manufacturing/installing an offset plate on the control cable cover. This proposed AD is prompted by a review of brake control cable operation conducted by the manufacturer. We are proposing this AD to prevent abrasion and wear of the outboard brake control cable, which could lead to cable separation and reduced control of airplane braking.
Airworthiness Directives; Gulfstream Aerospace Model G-159 Airplanes
Document Number: E6-10911
Type: Proposed Rule
Date: 2006-07-12
Agency: Federal Aviation Administration, Department of Transportation
This document revises an earlier supplemental notice of proposed rulemaking (NPRM), applicable to all Gulfstream Aerospace Corporation Model G-159 airplanes, that would have required repetitive non-destructive testing inspections to detect corrosion of the skin of certain structural assemblies, and corrective action if necessary. The first supplemental NPRM also would have required x-ray and ultrasonic inspections to detect corrosion and cracking of the splicing of certain structural assemblies, and repair if necessary. This new action revises the proposed rule by limiting the time certain repetitive inspections may be repeated before corrective action must be taken. The actions specified by this new proposed supplemental AD are intended to detect and correct corrosion and cracking of the lower wing plank splices and spot-welded skins of certain structural assemblies, which could result in reduced controllability of the airplane. This action is intended to address the identified unsafe condition.
Special Conditions: Dassault Aviation Model Falcon 7X Airplane, Windshield Coating in Lieu of Wipers
Document Number: E6-10894
Type: Proposed Rule
Date: 2006-07-12
Agency: Federal Aviation Administration, Department of Transportation
This action proposes special conditions for the Dassault Aviation Model Falcon 7X airplane. This airplane will have a novel or unusual design feature(s) associated with use of a hydrophobic coating, rather than windshield wipers, as the means to maintain a clear portion of the windshield during precipitation conditions, as required by the airworthiness standards for transport category airplanes. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These proposed special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.
Special Conditions; Cessna Aircraft Company Model 510 Airplane; Full Authority Digital Engine Control (FADEC) System
Document Number: E6-10469
Type: Rule
Date: 2006-07-12
Agency: Federal Aviation Administration, Department of Transportation
On June 16, 2006, we published a document on special conditions for Cessna Aircraft Company on the Model 510 airplane for full authority digital engine control system. There was an error in the background of the document in reference to the future type certificate number. This notice removes that sentence from the background; no change to the special conditions portion is necessary.
Proposed Modification of Class E Airspace; Honolulu International Airport, HI
Document Number: 06-6143
Type: Proposed Rule
Date: 2006-07-12
Agency: Federal Aviation Administration, Department of Transportation
This notice proposes to modify the Class E airspace area at Honolulu International Airport, HI. The establishment of an Area Navigation (RNAV) Required Navigation Performance (RNP) Instrument Approach Procedures (IAP) to Runway (RWY) 08L and 26L at Honolulu International Airport, Honolulu, HI has made this proposal necessary. Additional controlled airspace extending upward from 700 feet or more above the surface of the earth is needed to contain aircraft executing the RNAV (RNP) IAP to RWY 08L/26L at Honolulu International Airport. The intended effect of this proposal is to provide adequate controlled airspace for Instrument Flight Rules (IFR) operations at Honolulu International Airport, Honolulu, HI.
Notice of Intent To Rule on Request To Release Airport Property at Aransas County Airport, Rockport, TX
Document Number: 06-6142
Type: Notice
Date: 2006-07-12
Agency: Federal Aviation Administration, Department of Transportation
The FAA proposes to rule and invites public comment on the release of land at the Aransas County Airport under the provisions of section 125 of the Wendell H. Ford Aviation Investment Reform Act for the 21st Century (AIR 21).
Notice of Intent To Request Revision From the Office of Management and Budget of a Currently Approved Information Collection Activity, Request for Comments; Flight Operational Quality Assurance (FOQA) Program
Document Number: 06-6141
Type: Notice
Date: 2006-07-12
Agency: Federal Aviation Administration, Department of Transportation
The FAA invites public comments about our intention to request the Office of Management and Budget (OMB) to approve a current information collection. FOQA is a voluntary program for the routine collection and analysis of digital flight data from airplane operations. The purpose is to enable early corrective action for potential threats to safety.
Notice of Intent To Request Revision From the Office of Management and Budget of a Currently Approved Information Collection Activity, Request for Comments; Operating Requirements: Commuter and On-Demand Operation
Document Number: 06-6140
Type: Notice
Date: 2006-07-12
Agency: Federal Aviation Administration, Department of Transportation
The FAA invites public comments about our intention to request the Office of Management and Budget (OMB) to approve a current information collection. This information is needed to identify and track regulated entities required to implement anti-drug and alcohol misuse prevention programs as well as those companies that opt to implement programs.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.