Federal Aviation Administration June 5, 2006 – Federal Register Recent Federal Regulation Documents

Amendment to Class E Airspace; Jackson, WY
Document Number: 06-5107
Type: Rule
Date: 2006-06-05
Agency: Federal Aviation Administration, Department of Transportation
This action will revise the Class E airspace area at Jackson, WY. Additional controlled airspace is necessary to accommodate aircraft using a new Localizer Performance with Vertical Guidance (LPV) approach procedure with Lateral/Vertical Navigation (LNAV/VNAV) minimums. This additional controlled airspace is necessary for the safety of Instrument Flight Rules (IFR) aircraft executing this new LPV approach procedure at Jackson Hole Airport, Jackson, WY. This final rule also corrects an error in the airport's latitude and longitude coordinates and reference to exclusions to surrounding controlled airspace in the airspace description section.
Modification of Class E Airspace; Wellington Municipal Airport, KS
Document Number: 06-5106
Type: Rule
Date: 2006-06-05
Agency: Federal Aviation Administration, Department of Transportation
This action amends Title 14 Code of Federal Regulations, part 71 (14 CFR part 71) by revising the Class E airspace area at Wellington Municipal Airport, KS. The establishment of a non-directional beacon (NDB) runway (RWY) 35 standard instrument approach procedure (SIAP) necessitates the revision of the Class E airspace area. This airspace area and the legal description are revised to conform to the criteria in FAA Orders.
Airworthiness Directives; Pacific Aerospace Corporation Ltd. Model 750XL Airplanes
Document Number: 06-5047
Type: Rule
Date: 2006-06-05
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for certain Pacific Aerospace Corporation Ltd. Model 750XL airplanes. This AD requires you to inspect the condition of the insulation of the wiring adjacent to the electrical plugs mounted in the left-hand (LH) and right-hand (RH) sides of the forward end of the cockpit center console for signs of abrasion and arcing. If you find any evidence of abrasion or arcing, this AD requires you to replace the affected wire(s) and secure the wires away from the back shells of the electrical plugs. This AD results from mandatory continuing airworthiness information (MCAI) issued by the airworthiness authority for New Zealand. We are issuing this AD to detect and correct damaged wires on the LH and RH sides of the forward end of the cockpit center console, which could result in short-circuiting of the related wiring. This could lead to electrical failure of affected systems and potential fire in the cockpit.
Airworthiness Directives; DORNIER LUFTFAHRT GmbH Models 228-100, 228-101, 228-200, 228-201, 228-202, and 228-212 Airplanes
Document Number: 06-5045
Type: Rule
Date: 2006-06-05
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for all DORNIER LUFTFAHRT GmbH Models 228-100, 228-101, 228-200, 228-201, 228- 202, and 228-212 airplanes. This AD requires you to repetitively inspect the wiring in the flight deck overhead panels (locations 5VE and 6VE) for chafing and damage and repair any chafed or damaged wires. Regardless of the results of each inspection, this AD requires you to assure correct installation of the wiring in the flight deck overhead panels by reattaching or replacing the wire tie attachment holders and securing any loose wires to the wire tie attachment holders with plastic wire ties. This AD results from mandatory continuing airworthiness information (MCAI) issued by the airworthiness authority for Germany. We are issuing this AD to detect, correct, and prevent chafed or damaged wires in the flight deck overhead panels, which could result in short-circuiting of related wiring. This condition could lead to electrical failure of affected systems and potential fire in the flight deck.