Pipeline and Hazardous Materials Safety Administration January 2012 – Federal Register Recent Federal Regulation Documents
Results 1 - 8 of 8
Safety Advisory Notice: Return of Radioactively Contaminated Tissue Holders Purchased From Bed Bath and Beyond
PHMSA has been notified that Bed Bath and Beyond sold a number of tissue holders in the United States, identified as the Dual Ridge Metal tissue holder, model number DR9M, that emit low levels of radiation. PHMSA and the Nuclear Regulatory Commission believe that there is no immediate danger to the public; however, PHMSA is advising persons in possession of the contaminated tissue holders that they should arrange with Bed Bath and Beyond for their safe return. Any person in possession of this item should call Bed Bath and Beyond at 1- (800) 462-3966 to obtain information about the proper return procedures.
Pipeline Safety: Random Drug Testing Rate
PHMSA has determined that the minimum random drug testing rate for covered employees will remain at 25 percent during calendar year 2012.
Pipeline Safety: Implementation of the National Registry of Pipeline and Liquefied Natural Gas Operators
This notice advises owners and operators of pipeline facilities of PHMSA's plan regarding the implementation of the national registry of pipeline and liquefied natural gas operators.
Notice of Applications for Modification of Special Permit
In accordance with the procedures governing the application for, and the processing of, special permits from the Department of Transportation's Hazardous Material Regulations (49 CFR Part 107, Subpart B), notice is hereby given that the Office of Hazardous Materials Safety has received the applications described herein. This notice is abbreviated to expedite docketing and public notice. Because the sections affected, modes of transportation, and the nature of application have been shown in earlier Federal Register publications, they are not repeated here. Requests for modification of special permits (e.g., to provide for additional hazardous materials, packaging design changes, additional mode of transportation, etc.) are described in footnotes to the application number. Application numbers with the suffix ``M'' denote a modification request. These applications have been separated from the new application for special permits to facilitate processing.
Notice of Application for Special Permits
In accordance with the procedures governing the application for, and the processing of, special permits from the Department of Transportation's Hazardous Material Regulations (49 CFR Part 107, Subpart B), notice is hereby given that the Office of Hazardous Materials Safety has received the application described herein. Each mode of transportation for which a particular special permit is requested is indicated by a number in the ``Nature of Application'' portion of the table below as follows: 1Motor vehicle, 2Rail freight, 3Cargo vessel, 4Cargo aircraft only, 5Passenger-carrying aircraft.
Notice of Delays in Processing of Special Permits Applications
In accordance with the requirements of 49 U.S.C. 5117(c), PHMSA is publishing the following list of special permit applications that have been in process for 180 days or more. The reason(s) for delay and the expected completion date for action on each application is provided in association with each identified application.
Safety Advisory: Unauthorized Marking of Compressed Gas Cylinders
This is to notify the public that PHMSA has confirmed that Spears Fire & Safety, 287 Jackson Plaza, Ann Arbor, MI improperly requalified and marked high pressure compressed gas cylinders. During a recent investigation, PHMSA determined that between November 2008 and October 2011, Spears Fire & Safety requalified and marked with a Requalifier Identification Number (RIN) ``B037'' approximately 7,740 DOT specification cylinders after its authority to requalifiy high pressure cylinders expired on October 31, 2008. Additionally the investigation revealed that during this period, Spears Fire & Safety (1) failed to condemn cylinders with a permanent expansion greater than 10% of total expansion, (2) on multiple occasions did not maintain the minimum test pressure for the required time and (3) improperly repeated pressure tests on cylinders required to be condemned. Cylinders that have not been properly requalified and marked in accordance with the HMR may not be filled with compressed gas or other hazardous material.
Clarification and Further Guidance on the Fireworks Approvals Policy
This clarification provides further guidance on PHMSA's policy that it will only accept fireworks approvals applications from fireworks manufacturers or their designated agents and grant approvals only to manufacturers of fireworks devices. This clarification and additional guidance follows the issuance of Docket No. PHMSA-2010-0353; Notice 10-9, published on June 29, 2011.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
