National Highway Traffic Safety Administration November 2020 – Federal Register Recent Federal Regulation Documents
Results 1 - 8 of 8
General Motors LLC, Denial of Consolidated Petition for Decision of Inconsequential Defect
TK Holdings Inc. (``Takata'') has filed defect information reports (DIRs), in which it determined that a defect exists in certain passenger-side frontal air bag inflators that it manufactured, including passenger-side inflators that it supplied to General Motors, LLC (GM) for use in certain GMT900 vehicles. GM petitioned NHTSA for a decision that, because of differences in inflator design and vehicle integration, the equipment defect determined to exist by Takata is inconsequential as it relates to motor vehicle safety in GM's GMT900 vehicles, and that GM should therefore be relieved of its notification and remedy obligations under the National Traffic and Motor Vehicle Safety Act of 1966 and its applicable regulations. After reviewing GM's consolidated petition, supporting materials, and public comments, NHTSA has concluded that GM has not met its burden of establishing that the defect is inconsequential to motor vehicle safety, and denies the petition.
Request for Information: Impaired Driving Technologies
This notice requests information from interested parties to help inform the agency on available or late stage technology under development for impaired driving detection and mitigation. It also fulfills the Joint Explanatory Statement accompanying the Further Consolidated Appropriations Act, 2020, Public Law 116-94 (2020), which directs NHTSA to facilitate the sharing of information and the implementation and integration of impaired driving technology across the automotive industry.
Agency Information Collection Activities; Submission to the Office of Management and Budget for Review and Approval; National Survey of Drowsy Driving Knowledge, Attitudes and Behaviors
In compliance with the Paperwork Reduction Act of 1995 (PRA), this notice announces that the Information Collection Request (ICR) abstracted below will be submitted to the Office of Management and Budget (OMB) for review. The ICR describes the nature of the information collection and its expected burden. The ICR is for a new information collection for a one-time voluntary survey regarding knowledge, attitudes, and behaviors associated with drowsy driving. A Federal Register notice with a 60-day comment period soliciting public comments on the following information collection was published on July 14, 2020. NHTSA received two comments, which we address below.
General Motors, LLC, Denial of Petition for Decision of Inconsequential Noncompliance
General Motors, LLC (GM), has determined that the seat belt assemblies in certain model year (MY) 2017-2018 Chevrolet Silverado heavy duty and GMC Sierra heavy duty motor vehicles do not fully comply with Federal Motor Vehicle Safety Standard (FMVSS) No. 209, Seat Belt Assemblies. GM filed a noncompliance report dated September 14, 2017, and later amended it on September 22, 2017. GM also petitioned NHTSA on October 6, 2017, for a decision that the subject noncompliance is inconsequential as it relates to motor vehicle safety. This document announces the denial of GM's petition.
Consolidated Glass & Mirror, LLC, Receipt of Petitions for Decision of Inconsequential Noncompliance
Consolidated Glass & Mirror, LLC (CGM), a subsidiary of Guardian Industries Corporation (Guardian), has determined that certain laminated glass parts do not fully comply with Federal motor vehicle safety standard (FMVSS) No. 205, Glazing Materials. Guardian filed two noncompliance reports dated April 15, 2020 and December 14, 2018 CGM petitioned NHTSA on May 23, 2018, and December 20, 2018, for a decision that the subject noncompliances are inconsequential as they relate to motor vehicle safety. This document announces receipt of CGM's petitions.
Daimler Coaches North America, LLC, Receipt of Petition for Decision of Inconsequential Noncompliance
Daimler Coaches North America, LLC (DCNA), a subsidiary of Daimler AG, has determined that certain model year (MY) 2012-2019 Setra S407 and MY 2009-2020 Setra S417 buses do not fully comply with Federal Motor Vehicle Safety Standard (FMVSS) No. 101, Controls and Displays. DCNA filed a noncompliance report dated July 16, 2020. DCNA subsequently petitioned NHTSA on August 4, 2020, and later amended it on October 1, 2020, for a decision that the subject noncompliance is inconsequential as it relates to motor vehicle safety. This notice announces receipt of DCNA's petition.
Anthropomorphic Test Devices; Q3s 3-Year-Old Child Side Impact Test Dummy; Incorporation by Reference
This final rule amends NHTSA's regulation on anthropomorphic test devices (ATD) to add design and performance specifications for a test dummy representing a 3-year-old child, called the ``Q3s'' test dummy. The Q3s is an instrumented dummy that can assess the performance of child restraint systems in protecting small children in side impacts. Adding the Q3s provides NHTSA a new test device that can be used to improve side impact protection for children.
Federal Motor Vehicle Safety Standards; Child Restraint Systems, Incorporation by Reference
In accordance with the Moving Ahead for Progress in the 21st Century Act (MAP-21), this document proposes to amend Federal Motor Vehicle Safety Standard (FMVSS) No. 213, ``Child restraint systems,'' by updating the standard seat assembly on which child restraint systems (CRSs) are tested to determine their compliance with the standard's dynamic performance requirements. This NPRM proposes other amendments to modernize FMVSS No. 213, including a lessening of restrictions in some of the standard's owner registration and labeling requirements, to give manufacturers more flexibility in communicating with today's parents for the purposes of increasing owner registrations for recall notification purposes and increasing the correct use of CRSs, respectively. NHTSA is also proposing ways to streamline the Agency's use of test dummies to assess restraint performance, including simplifying the standard's compliance tests to make them more reflective of the real-world use of CRSs today. The purpose of these and other proposals is to modernize the seat assembly and other aspects of FMVSS No. 213, to help ensure the continued effectiveness of CRSs in current and future vehicles.