National Highway Traffic Safety Administration June 2007 – Federal Register Recent Federal Regulation Documents
Results 1 - 14 of 14
Notice of Receipt of Petition for Decision That Nonconforming 2004 Hyundai XG350 Passenger Cars Are Eligible for Importation
This document announces receipt by the National Highway Traffic Safety Administration (NHTSA) of a petition for a decision that 2004 Hyundai XG350 passenger cars that were not originally manufactured to comply with all applicable Federal motor vehicle safety standards (FMVSS) are eligible for importation into the United States because (1) They are substantially similar to vehicles that were originally manufactured for sale in the United States and that were certified by their manufacturer as complying with the safety standards, and (2) they are capable of being readily altered to conform to the standards.
Decision That Certain Nonconforming Motor Vehicles Are Eligible for Importation
This document announces decisions by NHTSA that certain motor vehicles not originally manufactured to comply with all applicable Federal motor vehicle safety standards (FMVSS) are eligible for importation into the United States because they are substantially similar to vehicles originally manufactured for importation into and/or sale in the United States and certified by their manufacturers as complying with the safety standards, and they are capable of being readily altered to conform to the standards or because they have safety features that comply with, or are capable of being altered to comply with, all applicable FMVSS.
Reports, Forms and Recordkeeping Requirements; Agency Information Collection Activity Under OMB Review
In compliance with the Paperwork Reduction Act of 1995 (44 U.S.C. 3501 et seq.), this notice announces that the Information Collection Request (ICR) abstracted below has been forwarded to the Office of Management and Budget (OMB) for review and comment. The ICR describes the nature of the information collections and their expected burden. The Federal Register Notice with a 60-day comment period was published on March 23, 2007 [72 FR 13856].
Highway Safety Programs; Model Specifications for Calibrating Units for Breath Alcohol Testers; Conforming Products List of Calibrating Units for Breath Alcohol Testers
This notice amends the Model Specifications for Calibrating Units for Breath Alcohol Testers (Model Specifications) by adopting an alternate test procedure for evaluating the accuracy of both wet bath and dry gas breath alcohol calibrating units infra-red spectroscopy, as proposed in the Federal Register on August 13, 1997 (62 FR 43416). Published with this notice is an updated Conforming Products List of Calibrating Units for Breath Alcohol Testers (CPL) of calibrating units that meet the Model Specifications. This updated CPL includes 22 new listings8 wet bath units and 14 dry gas units.
Federal Motor Vehicle Safety Standards; Electronic Stability Control Systems; Correction
In April 2007, the agency published a final rule establishing a new Federal motor vehicle safety standard on electronic stability control (ESC) systems for light vehicles. As part of that rulemaking, the final rule notice stated that NHTSA had decided to defer the standard's requirements related to the ESC telltales and controls until the end of the phase-in period (i.e., until September 1, 2011). Accordingly, most of the paragraphs containing ESC telltale and control requirements were prefaced with the phrase ``as of September 1, 2011.'' However, that phrase was inadvertently omitted from two of the paragraphs setting forth ESC telltale and control requirements. These amendments correct this administrative error by adding the phrase ``as of September 1, 2011'' to those paragraphs.
Meeting Notice
NHTSA announces a meeting of the Federal Interagency Committee on Emergency Medical Services (FICEMS) to be held in Washington, DC. This notice announces the date, time and location of the meeting, which will be open to the public.
Mosler Automotive; Receipt of Application for a Temporary Exemption From the Advanced Air Bag Requirements of FMVSS No. 208
In accordance with the procedures in 49 CFR Part 555, Mosler Automotive has petitioned the agency for a temporary exemption from certain advanced air bag requirements of FMVSS No. 208. The basis for the application is that compliance would cause substantial economic hardship to a manufacturer that has tried in good faith to comply with the standard.\1\
Defect and Noncompliance Notification, Reports, and Responsibility; Reporting of Information and Documents Concerning Potential Defects
This final rule contains administrative adjustments to part 573, Defect and Noncompliance Responsibility and Reports; part 577, Defect and Noncompliance Notification; and part 579, Reporting of Information and Communications about Potential Defects, of Title 49 of the CFR. Specifically, we are updating and/or supplementing the mailing and address information found in some sections, and correcting erroneous references found in other sections. We are also moving one paragraph of part 573, requiring submission of draft owner notification letters to NHTSA, to another paragraph found in part 577 that addresses the content of owner notification letters, where that paragraph more logically fits. None of these amendments impose or relax any substantive requirements or burdens on manufacturers.
Federal Motor Vehicle Safety Standards for School Bus Passenger Protection
NHTSA is having a public meeting to bring together a roundtable of State and local government policymakers, school bus and seat manufacturers, pupil transportation associations, and public interest groups to discuss the issue of seat belts on large school buses. The discussion on how best to provide safety during a crash, by compartmentalization or through the use of seat belts, has been ongoing for many years. This public meeting is an opportunity for an exchange among interested parties, as well as the public, on the safety, policy and economic issues related to the use of seat belts on school buses. The date, time, location, and framework for this public meeting are announced in this notice.
Reports, Forms and Recordkeeping Requirements Agency Information Collection Activity Under OMB Review
This notice solicits public comment on continuation of the requirements for the collection of information on brake hose manufacturers. Before a Federal agency can collect certain information from the public, it must receive approval from the Office of Management and Budget (OMB). Under procedures established by the Paperwork Reduction Act of 1995, before seeking approval, Federal agencies must solicit public comment on proposed collections of information, including extensions and reinstatement of previously approved collections. This document describes a collection of information associated with 49 CFR Part 571, Section 106, Brake Hoses.
Reports, Forms and Recordkeeping Requirements Agency Information Collection Activity Under OMB Review
In compliance with the Paperwork Reduction Act of 1995 (44 U.S.C. 3501 et seq.), this notice announces that the Information Collection Request (ICR) abstracted below has been forwarded to the Office of Management and Budget (OMB) for review and comment. The ICR describes the nature of the information collections and their expected burden. The Federal Register Notice with a 60-day comment period was published on March 14, 2007 (72 FR 11930). Comments: Comments should be directed to the Office of Information and Regulatory Affairs, Office of Management and Budget, 725-17th Street, NW., Washington, DC 20503, Attention NHTSA Desk Officer. Type of Request: Extension of a currently approved collection. Form Number: This collection of information uses no standard forms.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.