Federal Aviation Administration September 23, 2024 – Federal Register Recent Federal Regulation Documents

The FAA proposes to supersede Airworthiness Directive (AD) 2020-26-16, which applies to certain Piper Aircraft, Inc. (Piper) Model PA-28-151, PA-28-161, PA-28-181, PA-28-235, PA-28R-180, PA-28R-200, PA- 28R-201, PA-28R-201T, PA-28RT-201, PA-28RT-201T, PA-32-260, PA-32-300, PA-32R-300, PA-32RT-300, and PA-32RT-300T airplanes. AD 2020-26-16 requires calculating the factored service hours (FSH) for each main wing spar to determine when an inspection is required, inspecting the lower main wing spar bolt holes for crack(s), and replacing any cracked main wing spar. Since the FAA issued AD 2020-26-16, the FAA evaluated the reports required by AD 2020-26-16 and determined that repetitive inspections of the lower main wing spar bolt holes for crack(s) and non-crack damage (including deep scratches, gouges, and thread marks) and replacement or modification of the main wing spar should be required, calculated service hours (CSH) should be used instead of FSH to determine times for required actions for each main wing spar, and that certain airplanes should be removed from the applicability and a new airplane model added to the applicability. This proposed AD would require calculating the CSH for each main wing spar; repetitively inspecting the lower main wing spar bolt holes for crack(s) and non- crack damage and taking corrective actions as needed; and replacing or modifying main wing spars at a specified time. This proposed AD would also revise the applicability by removing certain airplanes and adding a new airplane model. The FAA is proposing this AD to address the unsafe condition on these products.