Federal Aviation Administration September 16, 2024 – Federal Register Recent Federal Regulation Documents
Results 1 - 9 of 9
Airworthiness Directives; Bell Textron Canada Limited Helicopters
The FAA is adopting a new airworthiness directive (AD) for certain Bell Textron Canada Limited Model 505 helicopters. This AD was prompted by a fuel leakage discovered during fuel system crash impact testing activity. This AD requires installing a grommet around the sump drain port fitting airframe hole, as specified in a Transport Canada AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus SAS Airplanes
The FAA is superseding Airworthiness Directive (AD) 2018-01- 07, AD 2018-19-33, AD 2019-21-01, AD 2021-26-20, AD 2022-13-09, AD 2022-14-06, AD 2023-09-05, and AD 2023-26-06, which applied to all Airbus SAS Model A300 B4-600, B4-600R, and F4-600R series airplanes, and Model A300 C4-605R Variant F airplanes (collectively called Model A300-600 series airplanes); and AD 2020-23-11, which applied to all Airbus SAS Model A300 and A300-600 series airplanes. AD 2018-01-07, AD 2018-19-33, AD 2019-21-01, AD 2021-26-20, AD 2022-13-09, AD 2022-14-06, AD 2023-09-05, and AD 2023-26-06 required revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. AD 2020-23-11 required repetitive inspections for discrepancies of certain areas in and around the fuselage and repair if necessary. This AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. This AD continues to require certain actions specified in the superseded ADs, and requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations; as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. This AD also removes the Model A300 series airplanes from the applicability. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; The Boeing Company Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain The Boeing Company Model 747-400F series airplanes. This AD was prompted by a report that cap seals were not applied to certain fasteners in the fuel tanks during production. This AD requires applying cap seals to certain fastener collars inside the fuel tanks. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus SAS Airplanes
The FAA proposes to supersede Airworthiness Directive (AD) 2022-11-01, which applies to certain Airbus SAS Model A300 series airplanes; Model A300 B4-600, B4-600R, and F4-600R series airplanes; and Model A300 C4-605R Variant F airplanes (collectively called Model A300-600 series airplanes). AD 2022-11-01 requires a detailed inspection (DET) of the main landing gear (MLG) support rib 5 lower flange, a fluorescent penetrant inspection (FPI) around the spot facing of certain fastener holes if necessary, and applicable corrective actions. Since the FAA issued AD 2022-11-01, it was determined additional airplanes are affected. This proposed AD would continue to require the actions in AD 2022-11-01 and add airplanes to the applicability, as specified in a European Union Aviation Safety Agency (EASA) AD, which is proposed for incorporation by reference (IBR). The FAA is proposing this AD to address the unsafe condition on these products.
Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
This rule establishes, amends, suspends, or removes Standard Instrument Approach Procedures (SIAPS) and associated Takeoff Minimums and Obstacle Departure procedures (ODPs) for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Airworthiness Directives; Airbus Helicopters
The FAA is adopting a new airworthiness directive (AD) for all Airbus Helicopters Model SA330J helicopters. This AD was prompted by a report of a main rotor gearbox (MGB) flange assembly coupling (coupling) that was incorrectly assembled. This AD requires a one-time visual inspection to determine correct assembly of each sliding flange installed on each MGB coupling, and if necessary, further corrective actions. This AD also prohibits installing certain MGB couplings or any MGB equipped with certain MGB couplings on any helicopter. These requirements are specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Establishment of Class E Airspace; Austin Airport, Austin, NV
This action proposes to establish Class E airspace extending upward from 700 feet above the surface at Austin Airport, Austin, NV. The airport is transitioning from visual flight rules (VFR) to instrument flight rules (IFR), and these actions would support the safety and management of IFR operations at the airport.
Notice of Availability, Notice of Industry Day Meeting, and Request for Comment on the Draft Engineering Brief 105A for Vertiport Design
The FAA's Office of Airports is announcing the availability of and requesting comments on the update to Engineering Brief (EB) 105 for Vertiport Design (referred to as EB 105A). This draft EB provides updated interim safety standards for aviation facilities that electric Vertical Take-Off and Landing (eVTOL) aircraft use for take-off and landing. These types of aviation facilities are commonly referred to as `vertiports'. Draft EB 105A will be posted Friday, September 20, 2024, on the FAA website at: https://www.faa.gov/airports/engineering/ engineering_briefs/drafts/. A comment matrix will also be available for members of the public to use to submit written comments. The FAA will hold a virtual industry day meeting on the draft EB 105A on Monday, September 30, 2024. Registration is required to attend. See the DATES and ADDRESSES sections for more information.
Airworthiness Directives; Leonardo S.p.a. Helicopters
The FAA is adopting a new airworthiness directive (AD) for all Leonardo S.p.a. Model A109C, A109E, A109K2, A109S, and AW109SP helicopters. This AD was prompted by reports of loose tail rotor duplex bearing locking nuts, possibly caused by improper installation. This AD requires disassembling certain tail rotor duplex bearings and reassembling them in accordance with updated procedures. This AD also prohibits installing certain tail rotor duplex bearing housings and pitch change slider assemblies. These actions are specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
