Federal Aviation Administration July 17, 2024 – Federal Register Recent Federal Regulation Documents
Results 1 - 6 of 6
Airworthiness Directives; Airbus SAS Airplanes
The FAA proposes to supersede Airworthiness Directive (AD) 2022-24-05, which applies to all Airbus SAS Model A318, A319, A320, and A321 series airplanes. AD 2022-24-05 requires repetitive inspections of certain galleys for corrosion of trolley retainer aluminum blocks and delamination of the upper panel of the trolley compartment, and applicable corrective action. Since the FAA issued AD 2022-24-05, the list of affected galleys has been revised, and a modification has been developed to restore the design integrity of the affected galleys. This proposed AD would continue to require the actions in AD 2022-24-05, provide optional terminating action for the repetitive inspections, revise the list of affected parts, and prohibit the installation of affected parts under certain conditions, as specified in a European Union Aviation Safety Agency (EASA). The FAA is proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus SAS Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for certain Airbus SAS Model Airbus A350-941 and A350-1041 airplanes. This proposed AD was prompted by a determination that the lower attachment studs on the aft galley complex may be installed incorrectly due to a missing instruction in the maintenance procedure task. This proposed AD would require a one-time inspection of the lower attachment studs on the aft galley complex, and depending on findings, accomplishment of applicable corrective actions, as specified in a European Union Aviation Safety Agency (EASA) AD, which is proposed for incorporation by reference (IBR). The FAA is proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; Deutsche Aircraft GmbH (Type Certificate Previously Held by 328 Support Services GmbH; AvCraft Aerospace GmbH; Fairchild Dornier GmbH; Dornier Luftfahrt GmbH) Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for all Deutsche Aircraft GmbH Model 328-100 and 328-300 airplanes. This proposed AD was prompted by reports of a broken attachment eyebolt in a Collins Aerospace JB6 Commuter Class passenger seat. This proposed AD would require a one-time detailed inspection of each affected part, and applicable corrective actions, and would also limit the installation of affected parts, as specified in a European Union Aviation Safety Agency (EASA) AD, which is proposed for incorporation by reference (IBR). The FAA is proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; De Havilland Aircraft of Canada Limited (Type Certificate Previously Held by Bombardier, Inc.) Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain De Havilland Aircraft of Canada Limited Model DHC-8-401 and - 402 airplanes. This AD was prompted by reports of moisture in the wing- to-fuselage joint, between the mating front spar and rear spar frame segments. This AD requires a visual inspection of the fuselage front and rear spar frames, an ultrasonic test if applicable, other specified actions, and repair if necessary. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Robinson Helicopter Company Helicopters
The FAA proposes to adopt a new airworthiness directive (AD) for Robinson Helicopter Company (Robinson Helicopter) Model R22 Beta, R22 Mariner, R44, and R44 II helicopters with a certain governor controller installed. This proposed AD was prompted by reports of engine governor failure, which was a result of water intrusion inside of the governor controller. This proposed AD would require removing certain governor controllers from service and installing a part eligible for installation. This proposed AD would also prohibit installing certain governor controllers on any helicopter. The FAA is proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; De Havilland Aircraft of Canada Limited (Type Certificate Previously Held by Bombardier, Inc.) Airplanes
The FAA is superseding Airworthiness Directive (AD) 2021-25-12 and AD 2022-11-11, which applied to certain De Havilland Aircraft of Canada Limited Model DHC-8-401 and -402 airplanes. AD 2021-25-12 required repetitive lubrications of the trailing arm of the nose landing gear (NLG). AD 2021-25-12 also required revising the existing maintenance or inspection program to include new and revised airworthiness limitations. AD 2022-11-11 required a modification to the NLG shock strut assembly. This AD continues to require the actions specified in AD 2021-25-12 and AD 2022-11-11 and requires replacement of the pivot pin and tow fitting assembly with a new, improved pivot pin and tow fitting assembly and prohibits the installation of affected parts. This AD was prompted by a determination that the pivot pin and tow fitting assembly of the NLG must be replaced. The FAA is issuing this AD to address the unsafe condition on these products.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
