Federal Aviation Administration May 2, 2024 – Federal Register Recent Federal Regulation Documents
Results 1 - 6 of 6
Airworthiness Directives; ATR-GIE Avions de Transport Régional Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain ATRGIE Avions de Transport R[eacute]gional Model ATR42 and ATR72 airplanes. This AD was prompted by a report of an electrical contactor that failed with contacts in the intermediate position, causing the airplane to lose power to multiple electrical systems. This AD requires repetitive operational tests of the affected part, and, depending on findings, accomplishment of applicable corrective action, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Notice of Intent of Waiver With Respect to Land; John Glenn Columbus International Airport, Columbus, OH
The FAA is considering a proposal to change approximately 2.392 acres of airport land from aeronautical use to non-aeronautical use and to authorize the sale of airport property located at John Glenn Columbus International Airport, Columbus, OH. The property is located in the northwest portion of the airport along the north side of Johnstown Road, west of the Runway Protection Zone for Runway 10L. The aforementioned land is proposed to be sold for future development of an office/warehouse building and is not needed for aeronautical use.
Airworthiness Directives; Airbus SAS Airplanes
The FAA is superseding Airworthiness Directive (AD) 2021-20- 08, which applied to certain Airbus SAS Model A318, A319, A320, A321, A330-200, A330-200 Freighter, A330-300, A330-800, A330-900, A340-200, A340-300, A340-500, A340-600, and A380-800 series airplanes. AD 2021- 20-08 required replacing certain nickel-cadmium (Ni-Cd) batteries with serviceable Ni-Cd batteries. This AD was prompted by a report that repetitive disconnection and reconnection of certain Ni-Cd batteries during airplane parking or storage could lead to a reduction in capacity of those batteries. This AD adds airplanes to the applicability and requires replacement of certain affected parts with serviceable parts as a precondition for return to service of airplanes from storage or parking, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus SAS Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Airbus SAS Model A350-941 airplanes. This AD was prompted by a report of cracks found on the trunnion arms of the inboard flap assemblies. This AD requires repetitive inspections for cracking of the trunnion arms of the inboard flap assembly, and applicable corrective actions, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. This AD also prohibits the installation of affected parts. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus Canada Limited Partnership (Type Certificate Previously Held by C Series Aircraft Limited Partnership (CSALP); Bombardier, Inc.) Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Airbus Canada Limited Partnership Model BD-500-1A10 and BD-500- 1A11 airplanes. This AD was prompted by a design review that identified the fixed emergency locator transmitter (ELT) lithium batteries would not be sufficiently cooled by the outside air in the event of a thermal runaway event. This AD requires replacing the ELT with a new ELT with redesigned batteries, as specified in a Transport Canada AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model CL-600-2B16 (604 Variant) airplanes. This AD was prompted by a report indicating that a new filter plate connector for the nose wheel steering (NWS) system electronic control module (ECM) does not meet certain certification requirements. This AD requires replacing all affected ECMs. This AD also prohibits the installation of affected parts under certain conditions. The FAA is issuing this AD to address the unsafe condition on these products.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
