Federal Aviation Administration October 3, 2023 – Federal Register Recent Federal Regulation Documents
Results 1 - 10 of 10
Amendment of Jet Route J-133 and Establishment of Area Navigation Route Q-801 in the Vicinity of Anchorage, AK
This action proposes to amend Jet Route J-133 by revoking a portion of the airway and establishing Canadian Area Navigation Route (RNAV) Q-801 in the vicinity of Anchorage, AK. The proposed amendment of J-133 is due to the pending decommissioning of several Navigational Aids (NAVAID) that provide course guidance along the airway. The proposed establishment of RNAV route Q-801 serves as a mitigation to J- 133 and provides additional routing to the southeast for aircraft traveling to Canada or to the Pacific Northwest United States.
Petition for Exemption; Summary of Petition Received; Wing Aviation
This notice contains a summary of a petition seeking relief from specified requirements of Federal Aviation Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, the FAA's exemption process. Neither publication of this notice nor the inclusion nor omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
This rule amends, suspends, or removes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide for the safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
This rule establishes, amends, suspends, or removes Standard Instrument Approach Procedures (SIAPS) and associated Takeoff Minimums and Obstacle Departure procedures (ODPs) for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Agency Information Collection Activities: Requests for Comments; Clearance of a Renewed Approval of Information Collection: Commercial Air Tour Operator Reports
In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew an information collection. The collection involves information from commercial air tour operators on the numbers and types of air tours over national park units. The information to be collected will be used by the FAA and the National Park Service to track air tour operations over national parks and as background information in the development of air tour management plans and voluntary agreements for purposes of addressing any potential significant impacts from commercial air tour operations on the natural or cultural resources or visitor experience at the parks.
Airworthiness Directives; Leonardo S.p.a. Helicopters
The FAA proposes to adopt a new airworthiness directive (AD) for all Leonardo S.p.a. Model A109E, A109S, AW109SP, A119, and AW119 MKII helicopters. This proposed AD was prompted by multiple reports of excessive axial play on the ball bearing of the lower half of the main rotor (MR) rotating scissor assembly. This proposed AD would require one-time scissor coupling and axial play inspections and repetitive quantitative axial play inspections and, depending on the results, additional inspections and replacing certain parts. This proposed AD would also require reporting information and prohibit installing certain parts unless certain inspections have been accomplished as specified in a European Union Aviation Safety Agency (EASA) AD, which is proposed for incorporation by reference. The FAA is proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; Pratt & Whitney Division Engines
The FAA is superseding Airworthiness Directive (AD) 2018-21- 11, which applied to all Pratt & Whitney Division (PW) Model PW4074D, PW4077D, PW4084D, PW4090, and PW4090-3 engines with a low-pressure compressor (LPC) fan hub, part number (P/N) 51B821 or P/N 52B521, installed. AD 2018-21-11 required performing repetitive eddy current inspections (ECIs) and fluorescent penetrant inspections (FPIs) for cracks in certain LPC fan hubs and removing LPC fan hubs from service that fail any inspection. Since the FAA issued AD 2018-21-11, the FAA determined that affected LPC fan hub assemblies can meet the published certificated life limit without the need for the required repetitive FPI inspections in AD 2018-21-11, and the repetitive ECI inspections require shortened intervals. Based on a report of another incident, the FAA determined that the unsafe condition is likely to exist or develop on additional LPC fan hub assemblies and PW model engines. This AD expands the applicability to include Model PW4074, PW4074D, PW4077, PW4077D, PW4084D, PW4090, and PW4090-3 engines with any part number LPC fan hub assembly installed and requires performing repetitive ECIs of the LPC fan hub assembly and, depending on the results of the inspections, removing the LPC fan hub assembly from service. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; The Boeing Company Airplanes
The FAA is superseding Airworthiness Directive (AD) 2021-02- 15, which applied to certain The Boeing Company Model 747-100, 747- 100B, 747-100B SUD, 747-200B, 747-200C, 747-200F, 747-300, 747-400, 747-400D, 747-400F, and 747SR series airplanes. AD 2021-02-15 required repetitive replacement of certain parts; an inspection to determine production configuration for certain parts; repetitive lubrication of certain parts and a repetitive inspection of certain parts for any exuding grease; repetitive inspections of certain parts for loose or missing attachment bolts, cracks or bushing migration, cracks or gouges, or broken, binding, or missing rollers; repetitive inspections of certain parts for cracks or corrosion; repetitive lubrication; and on-condition actions if necessary. This AD was prompted by the FAA's determination that certain compliance times must be reduced in order to address the unsafe condition. This AD continues to require the actions specified in AD 2021-02-15 with certain reduced compliance times. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Dassault Aviation Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Dassault Aviation Model MYSTERE-FALCON 900, FALCON 900EX, FALCON 2000, and FALCON 2000EX airplanes. This AD was prompted by reports of the wing anti-icing (WAI) system leaking in the wing leading edge. This AD requires a one-time inspection of the WAI system, and corrective actions if necessary, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Centerpointe Aerospace Inc. Helicopters
The FAA proposes to adopt a new airworthiness directive (AD) for all Centerpointe Aerospace Inc. (Centerpointe) Model S-58BT, S- 58DT, S-58ET, S-58FT, S-58HT, and S-58JT helicopters. This proposed AD was prompted by an indication of a crack on the angle gearbox mount (AGBM). This proposed AD would require repetitively performing a fluorescent penetrant inspection (FPI) and depending on the results, removing the AGBM from service. The FAA is proposing this AD to address the unsafe condition on these products.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.