Federal Aviation Administration July 19, 2023 – Federal Register Recent Federal Regulation Documents
Results 1 - 11 of 11
Agency Information Collection Activities: Request for Comments; Clearance of a New Approval for Information Collection: Safety Management System Voluntary Program
In accordance with the Paperwork Reduction Act of 1995, the Federal Aviation Administration (FAA) invites public comments about our intention to request the Office of Management and Budget (OMB) approval for an information collection to support the analysis of safety data as part of the Safety Management System Voluntary Program (SMSVP). The data collected will be used by the FAA Flight Standards Service, Safety Management System Program Office (SMSPO) to evaluate certificate holders participating in the voluntary program. This Information Collection will enable the FAA to ensure conformity with the SMSVP Standard (voluntary program guidelines and performance measures).
Airworthiness Directives; Dassault Aviation Airplanes
The FAA proposes to supersede Airworthiness Directive (AD) 2020-01-13, which applies to all Dassault Aviation Model MYSTERE-FALCON 200 airplanes. AD 2020-01-13 requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. Since the FAA issued AD 2020-01- 13, the FAA has determined that new or more restrictive airworthiness limitations are necessary. This proposed AD would continue to require the actions in AD 2020-01-13 and would require revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations, as specified in a European Union Aviation Safety Agency (EASA) AD, which is proposed for incorporation by reference (IBR). The FAA is proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; Dassault Aviation Airplanes
The FAA proposes to supersede Airworthiness Directive (AD) 2020-03-24, which applies certain Dassault Aviation Model MYSTERE- FALCON 20-C5, 20-D5, 20-E5, and 20-F5 airplanes. AD 2020-03-24 requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. Since the FAA issued AD 2020-03-24, the FAA has determined that new or more restrictive airworthiness limitations are necessary. This proposed AD would continue to require the actions in AD 2020-03-24 and require revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations, as specified in a European Union Aviation Safety Agency (EASA) AD, which is proposed for incorporation by reference (IBR). The FAA is proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus SAS Airplanes
The FAA is superseding Airworthiness Directive (AD) 2013-07- 03, which applied to all Airbus SAS Model A330-200, A330-200 Freighter, A330-300, A340-200, and A340-300 series airplanes; and Model A340-541 and A340-642 airplanes. AD 2013-07-03 required repetitive inspections for degradation of the bogie pivot pins and for any cracks and damage of the pivot pin bushes of the main and central landing gear; an inspection of the affected bogie pivot pins for corrosion and base metal cracks; and repairing or replacing bogie pivot pins and pivot pin bushes, if necessary. This AD was prompted by development of a modification that address the unsafe condition and a determination that a parts installation prohibition is necessary. This AD continues to require certain actions in AD 2013-07-03, add an optional modification that would terminate the repetitive inspections, and add a parts installation prohibition, as specified in a European Union Aviation Safety Agency (EASA), which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model CL-600-2B16 (604 Variant) airplanes. This AD was prompted by reports of oxygen leaks caused by cracked, brittle, or broken oxygen hoses that were found during scheduled maintenance tests of the airplane oxygen system. This AD requires replacing oxygen system hoses having any part number in the O2C20T1 and O2C20T14 series. This AD also prohibits installation of affected oxygen hoses. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Survitec Group Limited (RFD Beaufort Ltd.) Life Jackets
The FAA is adopting a new airworthiness directive (AD) for certain Survitec Group Limited (RFD Beaufort Ltd.) Type 102 Mk 3, 102 Mk 4, and 105 Mk 1 life jackets. This AD was prompted by a report that some life jackets were found packed in the wrong valise (container). This AD requires an inspection for a discrepancy (mismatch of the valise/container description and life jacket type) of life jackets and, if necessary, replacement of the life jacket. This AD also limits the installation of affected parts under certain conditions. The FAA is issuing this AD to address the unsafe condition on these products.
Demonstration of Radio Altimeter Tolerant Aircraft
The Federal Aviation Administration (FAA) announces Policy Statement PS-AIR-600-39-01 for demonstrating an aircraft is a ``radio altimeter tolerant airplane'' or a ``radio altimeter tolerant rotorcraft'' using a method approved by the FAA.
Airworthiness Directives; Airbus SAS Airplanes
The FAA is superseding Airworthiness Directive (AD) 2021-16- 18, which applied to all Airbus SAS Model A330-200 Freighter, A330-200, A330-300, A330-800, A330-900, A340-200, A340-300, A340-500, and A340- 600 series airplanes. AD 2021-16-18 required repetitive inspections of certain fuel pumps for cavitation erosion, replacement if necessary, revision of the operator's existing minimum equipment list (MEL), and accomplishment of certain maintenance actions related to defueling and ground fuel transfer operations. This AD was prompted by reports of a fuel pump showing cavitation erosion that exposed the fuel pump power supply wires, and a determination that affected fuel pumps must be replaced with new, more erosion resistant pumps. This AD continues to require the actions in AD 2021-16-18, and also requires replacement of affected parts, which would terminate the repetitive inspections, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. This AD also prohibits the installation of certain affected parts. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; BAE Systems (Operations) Limited Airplanes
The FAA is adopting a new airworthiness directive (AD) for all BAE Systems (Operations) Limited Model 4101 airplanes. This AD was prompted by in-service cracking of the passenger door edge member, seal carrier, and inner skin, adjacent to the roller guide bracket. This AD requires a one-time inspection of the external visible surface of the inner skin, door edge member, and seal carrier adjacent to the roller bracket attachment brackets; and the inner skin, door edge member, and seal carrier at the roller bracket attachment bore, and repair if necessary. The FAA is issuing this AD to address the unsafe condition on these products.
Amendment of United States Area Navigation (RNAV) Route T-302 in Vicinity of Acequia, ID
This action proposes to amend United States Area Navigation (RNAV) route, T-302, in the vicinity of Acequia, ID to increase the RNAV route's lateral separation from Restricted Area 3203 (R-3203). This proposal will also increase the lateral separation between T-302, parachute activities at Nampa Municipal Airport (MAN) and Caldwell Executive Airport in Idaho (EUL).
Airworthiness Directives; MHI RJ Aviation ULC (Type Certificate Previously Held by Bombardier, Inc.) Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for all MHI RJ Aviation ULC Model CL-600-2B19 (Regional Jet Series 100 & 440); CL-600-2C10 (Regional Jet Series 700, 701, & 702); CL-600-2C11 (Regional Jet Series 550); CL-600-2D15 (Regional Jet Series 705); CL- 600-2D24 (Regional Jet Series 900); and CL-600-2E25 (Regional Jet Series 1000) airplanes. This proposed AD was prompted by a determination that aircraft maintenance manual (AMM) tasks and certification maintenance requirement (CMR) tasks are necessary. This proposed AD would require revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive AMM and CMR tasks. The FAA is proposing this AD to address the unsafe condition on these products.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.