Federal Aviation Administration September 14, 2022 – Federal Register Recent Federal Regulation Documents
Results 1 - 9 of 9
Membership in the National Parks Overflights Advisory Group
By Federal Register notice on August 8, 2022 the Federal Aviation Administration (FAA) and the National Park Service (NPS) invited interested persons to apply to fill one existing and one upcoming vacancy on the National Parks Overflights Advisory Group (NPOAG). This notice informs the public of the selection made for the one upcoming vacancy representing environmental concerns. No selection was made for the existing opening representing Native American tribal concerns so this notice also invites persons interested in that opening to apply.
Petition for Exemption; Summary of Petition Received; Harris Aerial, LLC
This notice contains a summary of a petition seeking relief from specified requirements of Federal Aviation Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, the FAA's exemption process. Neither publication of this notice nor the inclusion nor omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model CL-600-1A11 (600), CL-600-2A12 (601), and CL-600-2B16 (601-3A and 601-3R Variants) airplanes. This AD was prompted by reports that during certain operating modes, the flight guidance/autopilot does not account for engine failure while capturing an altitude. This AD requires revising the existing airplane flight manual (AFM) to provide the flightcrew with a new limitation and procedure for operation during certain flight modes. The FAA is issuing this AD to address the unsafe condition on these products.
Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
This rule amends, suspends, or removes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide for the safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
This rule establishes, amends, suspends, or removes Standard Instrument Approach Procedures (SIAPS) and associated Takeoff Minimums and Obstacle Departure procedures (ODPs) for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Airworthiness Directives; Continental Aerospace Technologies, Inc. Reciprocating Engines
The FAA proposes to supersede Airworthiness Directive (AD) 2022-04-04, which applies to certain Continental Aerospace Technologies, Inc. (Continental) C-125, C145, IO-360, IO-470, IO-550, O-300, O-470, TSIO-360, and TSIO-520 series model reciprocating engines and certain Continental Motors IO-520 series model reciprocating engines with a certain oil filter adapter installed. AD 2022-04-04 requires replacing the oil filter adapter fiber gasket (fiber gasket) with an oil filter adapter copper gasket (copper gasket). Since the FAA issued AD 2022-04-04, the FAA determined that the reciprocating engines identified in the applicability of AD 2022-04-04 are incorrect. This proposed AD would require replacing the fiber gasket with the copper gasket or the stainless steel embedded within polytetrafluoroethylene gasket (stainless steel PTFE gasket). This proposed AD would also revise the applicability to add and remove certain reciprocating engine models, update the required actions to add an additional part-numbered stainless steel PTFE gasket as a replacement part, and revise the special flight permit paragraph to expand the limitations. The FAA is proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; Rolls-Royce Deutschland Ltd & Co KG (Type Certificate Previously Held by Rolls-Royce plc) Turbofan Engines
The FAA proposes to adopt a new airworthiness directive (AD) for certain Rolls-Royce Deutschland Ltd & Co KG (RRD) BR700-710A1-10, BR700-710A2-20, and BR700-710C4-11 model turbofan engines. This proposed AD was prompted by reports of cracks on certain low-pressure compressor (LPC) rotor (fan) disks. This proposed AD would require initial and repetitive visual inspections of certain LPC rotor fan disks and, depending on the results of the inspections, replacement of any LPC rotor fan disk with cracks detected. This proposed AD would also allow modification of the engine in accordance with RRD service information as a terminating action to these inspections, as specified in a European Union Aviation Safety Agency (EASA) AD, which is proposed for incorporation by reference (IBR). The FAA is proposing this AD to address the unsafe condition on these products.
Petition for Exemption; Summary of Petition Received; Osprey Agridrone Solutions, LLC
This notice contains a summary of a petition seeking relief from specified requirements of Federal Aviation Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, the FAA's exemption process. Neither publication of this notice nor the inclusion nor omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Notice of Release of Land Affecting Federal Grant Assurance Obligations at Paso Robles Municipal Airport, Paso Robles, San Luis Obispo County, California
The Federal Aviation Administration (FAA) is considering a proposal and invites public comment to change a portion of the airport from aeronautical use to non-aeronautical use at Paso Robles Municipal Airport (PRB), San Luis Obispo County, California. The proposal consists of one parcel containing 22.07 acres of airport land located southwest corner of the airport facility North of Airport Road and West of Satellite Drive.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
