Federal Aviation Administration August 3, 2022 – Federal Register Recent Federal Regulation Documents
Results 1 - 6 of 6
Airworthiness Directives; Gulfstream Aerospace Corporation Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Gulfstream Aerospace Corporation (Gulfstream) Model GV and GV-SP airplanes. This AD was prompted by corrosion of the horizontal stabilizer lower bonded skin assemblies. This AD requires inspecting the horizontal stabilizer lower skin and associated bonded doublers and bonded stringers, repairing any area with corrosion beyond allowable damage limits, and incorporating revisions to the airworthiness limitations section (ALS) in the existing aircraft maintenance manual (AMM) or progressive maintenance program. The FAA is issuing this AD to address the unsafe condition on these products.
Revocation of Class E Airspace; Milford, PA
This action removes Class E airspace in Milford, PA, as Myer Airport has been abandoned, and controlled airspace is no longer required. This action enhances the safety and management of controlled airspace within the national airspace system.
Notice of Intent To Rule on a Land Release Request at Malden Regional Airport & Industrial Park (MAW), Malden, MO
The FAA proposes to rule and invites public comment on the request to release and sell a 4.81 acre parcel and a .016 acre parcel of federally obligated airport property at the Malden Regional Airport & Industrial Park (MAW), Malden, Missouri, under the provisions agency regulations.
Request for Comments in Minimum Seat Dimensions Necessary for Safety of Air Passengers (Emergency Evacuation)
In 2018, Congress directed the FAA to, after notice and comment, issue such rules for minimum dimensions for passenger seats that are necessary for passenger safety. The FAA conducted simulated emergency evacuations, the results of which are in a publicly-available report. The FAA seeks public comment on the minimum seat dimensions that are necessary for passenger safety.
Special Conditions: Dassault Aviation Falcon Model 6X Airplane; Design Speed Definition
These special conditions are issued for the Dassault Aviation (Dassault) Model Falcon 6X Airplane. This airplane will have a novel or unusual design feature when compared to the state of technology envisioned in the airworthiness standards for transport category airplanes. This design feature is a high speed protection system that limits nose-down pilot authority at speeds above VC/ MC. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.
Airworthiness Directives; The Boeing Company Airplanes
The FAA is adopting a new airworthiness directive (AD) for all The Boeing Company Model 777 airplanes. This AD was prompted by high electrical resistance within the gust suppression sensor (GSS) transorb modules due to corrosion on the transorb module threads. This AD requires disconnecting the connectors and capping and stowing the wires that had been attached to the affected transorb modules. The FAA is issuing this AD to address the unsafe condition on these products.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.