Federal Aviation Administration October 14, 2021 – Federal Register Recent Federal Regulation Documents
Results 1 - 11 of 11
Petition for Exemption; Summary of Petition Received; The Boeing Company
This notice contains a summary of a petition seeking relief from specified requirements of Federal Aviation Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, the FAA's exemption process. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Petition for Exemption; Summary of Petition Received; The Boeing Company
This notice contains a summary of a petition seeking relief from specified requirements of Federal Aviation Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, the FAA's exemption process. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Women in Aviation Advisory Board; Notice of Public Meeting
This notice announces a meeting of the Women in Aviation Advisory Board (the Board).
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model CL-600-2B16 (604 Variant) airplanes. This AD was prompted by multiple reports of cracking of the main landing gear (MLG) shock strut lower pin. This AD requires repetitive lubrication and repetitive detailed visual inspections (DVI) and non- destructive test (NDT) inspections of the MLG shock strut lower pins, and replacement if necessary. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Dassault Aviation Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Dassault Aviation Model FALCON 7X, FALCON 900EX, and FALCON 2000EX airplanes. This AD was prompted by a report of a manufacturing issue involving misalignment of a cabin seat pin and plate that can prevent the recline locking mechanism from properly engaging when the seat is in taxi, take-off, or landing position. This AD requires an inspection of certain cabin seats for discrepancies and corrective action, as specified in European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus SAS Airplanes
The FAA is superseding Airworthiness Directive (AD) 2019-19- 06, which applied to certain Airbus SAS Model A330-202, -243, -243F, - 302, -323, and -343 airplanes. AD 2019-19-06 required an inspection to determine the part number and serial number of the slat geared rotary actuators (SGRAs), and replacement of each affected SGRA with a serviceable part. This AD continues to require replacement of each affected SGRA with a serviceable part, expands the applicability to include all airplanes on which the affected part may be installed, and also prohibits installation of an affected part; as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. This AD was prompted by a report that cracks have been found within the ring gears of the SGRAs due to a change in the manufacturing process and inadequate post-production non-destructive testing for potential cracking, and a determination that the requirements of AD 2019-19-06 may not ensure the permanent removal from service of affected SGRAs. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; De Havilland Aircraft of Canada Limited (Type Certificate Previously Held by Bombardier, Inc.) Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain De Havilland Aircraft of Canada Limited Model DHC-8-102, -103, and -106 airplanes; Model DHC-8-201 and -202 airplanes; Model DHC-8- 301, -311, and -315 airplanes; and Model DHC-8-400, -401, and -402 airplanes. This AD was prompted by reports that mounting nuts attaching the rudder actuator bracket to the vertical stabilizer have been found cracked or missing due to hydrogen embrittlement. This AD requires a one-time inspection of the rudder actuator bracket mounting nuts, and corrective actions if necessary. The FAA is issuing this AD to address the unsafe condition on these products.
Proposed Amendment of Class E Airspace; Covington, GA
This action proposes to amend Class E airspace extending upward from 700 feet above the surface for Covington Municipal Airport, Covington, GA. The FAA is proposing this action as a result of an airspace review caused by the decommissioning of the ALCOVY Non- directional Beacon (NDB) and cancellation of the associated approaches. Controlled airspace is necessary for the safety and management of instrument flight rules (IFR) operations in the area.
Airworthiness Directives; The Boeing Company Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for certain The Boeing Company Model 747-400, -400D, and -400F series airplanes. This proposed AD was prompted by reports of burned Boeing Material Specification (BMS) 8-39 urethane foam, and a report from the airplane manufacturer that airplanes were assembled with seals throughout various areas of the airplane (including flight deck and cargo compartments) made of BMS 8-39 urethane foam, a material with fire-retardant properties that deteriorate with age. This proposed AD would require replacing the system tube/wire seals made of BMS 8-39 urethane foam in certain areas of the airplane. The FAA is proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; The Boeing Company Airplanes
The FAA proposes to supersede Airworthiness Directive (AD) 2016-09-01, which applies to certain The Boeing Company Model 777-200 and -300 series airplanes. AD 2016-09-01 requires repetitive inspections for cracking of the left-and right-side forward outer chords of the pivot bulkhead, and related investigative and corrective actions if necessary. AD 2016-09-01 also provides a modification of the pivot bulkhead, which terminates the repetitive inspections. Since the FAA issued AD 2016-09-01, it has received reports that cracking of the left- and right-side forward outer chords of the pivot bulkhead were found at earlier compliance times than those specified in AD 2016-09-01 and determined that the inspection areas must be expanded, and that additional inspections are needed in areas that were modified as specified in AD 2016-09-01. This proposed AD would retain certain requirements of AD 2016-09-01. This proposed AD would require doing repetitive detailed and high frequency eddy current (HFEC) inspections of the longeron fitting and, for certain airplanes, the bulkhead assembly structure, for any cracking and doing all applicable on- condition actions. The FAA is proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus SAS Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Airbus SAS Model A318, A319, A320, A321, A330-200, A330-200 Freighter, A330-300, A330-800, A330-900, A340-200, A340-300, A340-500, A340-600, and A380-800 series airplanes. This AD was prompted by a report that repetitive disconnection and reconnection of certain batteries during airplane parking or storage could lead to a reduction in capacity of those batteries. This AD requires replacing certain nickel-cadmium (Ni- Cd) batteries with serviceable Ni-Cd batteries, or maintaining the electrical storage capacity of those Ni-Cd batteries during airplane storage or parking, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
