Federal Aviation Administration September 22, 2020 – Federal Register Recent Federal Regulation Documents
Results 1 - 15 of 15
Agency Information Collection Activities: Requests for Comments; Clearance of Renewed Approval of Information Collection: NAS Data Release Request
In accordance with the Paperwork Reduction Act of 1995, the FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew an information collection. The collection is an application form, and collection frequency is on occasion, depending on how often requests for National Airspace System (NAS) data are submitted to the FAA. The information to be collected will be used to evaluate the validity of a user's request for NAS data from FAA systems and equipment.
Airworthiness Directives; Airbus SAS Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Airbus SAS Model A318 series airplanes; Model A319-111, -112, - 113, -114, -115, -131, -132, and -133 airplanes; Model A320-211, -212, -214, -216, -231, -232, and -233 airplanes; and Model A321-111, -112, -131, - 211, -212, -213, -231, and -232 airplanes. This AD was prompted by reports of crack findings in and around the fastener holes of the central and lateral window frame upper junction; those cracks were found on fastener holes outside of the inspection area specified in a certain airworthiness limitation item (ALI) task. This AD requires repetitive inspections of the upper junction fastener holes at the lateral window frame for cracking; and for certain airplanes, repetitive inspections of the spotface around the fastener holes for cracking; and corrective actions if necessary; as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; The Boeing Company Airplanes
The FAA proposes to supersede Airworthiness Directive (AD) 2007-07-03, which applies to certain The Boeing Company Model 747-100, 747-100B, 747-100B SUD, 747-200B, 747-200C, 747-200F, 747-300, 747-400, 747-400D, 747-400F, 747SR, and 747SP series airplanes. AD 2007-07-03 requires repetitive tests to detect hot air leaking from the trim air diffuser ducts or sidewall riser duct assemblies (collectively referred to as TADDs), related investigative actions, and corrective actions if necessary. AD 2007-07-03 also provides an optional terminating action for the repetitive tests. Since the FAA issued AD 2007-07-03, operators reported high temperature composite material TADDs installed as specified in AD 2007-07-03 have also failed. This proposed AD would require repetitive inspections of all TADD material for damage and applicable on-condition actions. The FAA is proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; Leonardo S.p.A. Helicopters
The FAA is adopting a new airworthiness directive (AD) for all Leonardo S.p.A. Model AW169 helicopters and certain Leonardo S.p.A Model AW189 helicopters. This AD was prompted by a report of a broken extrusion rubber window seal. This AD requires installation of a reinforcement around the rubber filler wedge where the extrusion rubber window seal meets the door's emergency exit handle. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus Helicopters Deutschland GmbH Helicopters
The FAA is adopting a new airworthiness directive (AD) for all Airbus Helicopters Deutschland GmbH Model MBB-BK 117 D-2 helicopters. This AD was prompted by a report of an erroneous low rotor revolutions per minute (RPM) indication after establishing a one engine inoperative (OEI) condition. This AD requires a software (SW) modification for the aircraft management computer (AMC). The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus Helicopters
The FAA is superseding Airworthiness Directive (AD) 2000-22-19 for Eurocopter France (now Airbus Helicopters) Model SA330F, G, and J helicopters. AD 2000-22-19 required repetitively inspecting certain tail rotor (T/R) blades for skin debonding and a crack. Since the FAA issued AD 2000-22-19, the inspection procedures have been revised. Additionally, the FAA is adding an affected part-numbered T/R blade and the FAA-validation for Model SA330F and G helicopters has been cancelled. This new AD revises the applicability, requires repetitively inspecting affected T/R blades with the new inspection procedures, and depending on the inspection results, repairing or replacing the T/R blade. This new AD also prohibits installing an affected T/R blade unless it has passed the inspections. The actions of this AD are intended to address an unsafe condition on these products.
Airworthiness Directives; Leonardo S.p.a. Helicopters
The FAA is adopting a new airworthiness directive (AD) for certain Leonardo S.p.a. (Leonardo) Model A119 and AW119 MKII helicopters. This AD requires repetitive borescope inspections of the tail rotor gearbox (TGB) and depending on the inspection results, removing the TGB from service. This AD was prompted by reports of corrosion on the internal surface of the 90-degree TGB output shaft. The actions of this AD are intended to address an unsafe condition on these products.
Airworthiness Directives; Leonardo S.p.a. Helicopters
The FAA is adopting a new airworthiness directive (AD) for Leonardo S.p.a. Model AW169 helicopters. This AD requires modifying the weight on wheels (WoW) support installation on the main landing gear (MLG). This AD was prompted by a report that an inappropriately tightened WoW support could result in a rotation of the support and improper WoW switch performance. The actions of this AD are intended to address an unsafe condition on these products.
Proposed Amendment of Class E Airspace; DuBois, PA
This action proposes to amend Class E surface airspace and Class E airspace extending upward from 700 feet above the surface in DuBois, PA, due to the decommissioning of the Clarion VORTAC and cancellation of the associated approach at DuBois Regional Airport. This action would also update the name of the airport, as well as the name and geographic coordinates of Penn Highlands Healthcare-DuBois Heliport. Controlled airspace is necessary for the safety and management of instrument flight rules (IFR) operations in the area.
Proposed Amendment of Class D Airspace, and Proposed Removal of Class E Airspace; Homestead, FL
This action proposes to amend Class D airspace, and remove Class E airspace designated as an extension to a Class D surface area for Homestead Air Reserve Base (ARB), Homestead, FL. This action would also update the geographic coordinates of the airport. Controlled airspace is necessary for the safety and management of instrument flight rules (IFR) operations in the area.
Airworthiness Directives; Airbus Helicopters
The FAA is revising an earlier proposal to supersede Airworthiness Directive (AD) 2014-12-12, which applies to certain Airbus Helicopters Model EC120B and EC130B4 helicopters. This action revises the notice of proposed rulemaking (NPRM) by revising the compliance time, expanding the applicability, and providing improved procedures for modifying the sliding door star support as specified in a European Union Aviation Safety Agency (EASA) AD, which will be incorporated by reference. The FAA is proposing this AD to address the unsafe condition on these products. Since these actions would impose an additional burden over those in the NPRM, the FAA is reopening the comment period to allow the public the chance to comment on these changes.
Airworthiness Directives; Textron Aviation Inc. (Textron) Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for certain Textron (type certificate previously held by Cessna Aircraft Company) Models 208 and 208B airplanes. This proposed AD was prompted by reports of loose elevator torque tube attach fasteners. This proposed AD would require repetitively inspecting the inboard and outboard elevator torque tube attachments for loose or incorrectly installed fasteners, replacing all fasteners if loose or incorrectly installed fasteners are found, and reporting the inspection results to the FAA. This AD also includes optional actions to terminate the repetitive inspections. The FAA is proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus SAS Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for certain Airbus SAS Model A350-941 and -1041 airplanes. This proposed AD was prompted by reports of migration of the bushings of the horizontal tail plane (HTP) lateral load fittings (LLFs) on the left- and right-hand sides during flight test. This proposed AD would require repetitive inspections for migration of the bushings of the HTP LLFs on the left- and right-hand sides, and terminating repair or modification of any affected bushing, as specified in a European Union Aviation Safety Agency (EASA), which will be incorporated by reference. The FAA is proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; The Boeing Company Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for all The Boeing Company Model 737-100, -200, -200C, -300, -400, and -500 series airplanes. This proposed AD was prompted by a report of cracks found in fastener holes at a certain station of the center wing box. This proposed AD would require repetitive external surface high frequency eddy current inspections (HFEC) and repetitive external surface ultrasonic inspections; or repetitive internal detailed inspections; of a certain station of the center wing box for any cracking, and repair if necessary. The FAA is proposing this AD to address the unsafe condition on these products.
Accepted Means of Compliance; Airworthiness Standards: Normal Category Airplanes
This document announces the availability of means of compliance to the applicable airworthiness standards for normal category airplanes. The Administrator finds these means of compliance to be an acceptable means, but not the only means, of showing compliance to the applicable airworthiness standards for normal category airplanes and that they provide an appropriate level of safety.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
