Federal Aviation Administration June 2018 – Federal Register Recent Federal Regulation Documents

This notice contains a summary of a petition seeking relief from specified requirements of Title 14 of the Code of Federal Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, the FAA's exemption process. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.

This notice contains a summary of a petition seeking relief from specified requirements of Title 14 of the Code of Federal Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, the FAA's exemption process. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.

This notice contains a summary of a petition seeking relief from specified requirements of Federal Aviation Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, the FAA's exemption process. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.

These special conditions are issued for the Airbus Model A318, A319, A320 and A321 series airplanes. These airplanes will have a novel or unusual design feature when compared to the state of technology envisioned in the airworthiness standards for transport category airplanes. This design feature is airplane electronic systems and networks that allow access from external sources (e.g., wireless devices, internet connectivity) to the airplane's internal electronic components. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew an information collection. The information to be collected will be used to determine if licensees have complied with financial responsibility requirements for maximum probable loss determination (MPL) analysis as set forth in FAA regulations. The FAA is responsible for determining MPL required to cover claims by a third party for bodily injury or property damage, and the United States, its agencies, and its contractors and subcontractors for covered property damage or loss, resulting from a Commercial space transportation permitted or licensed activity. The MPL determination forms the basis for financial responsibility requirements issued in a license or permit order.

The Federal Aviation Administration (FAA) is finalizing specific criteria to guide the identification and selection of appropriate circling procedures that can be considered for cancellation. These procedures include certain circling procedures (to include circling-only instrument approach procedures (IAPs) and circling minima charted on straight-in IAPs). The circling procedures associated with this cancellation initiative will be selected based on the criteria outlined in this statement of policy. This document is not a part of the FAA's VOR minimum operating network (MON) initiative.

We propose to adopt a new airworthiness directive (AD) for all BAE Systems (Operations) Limited Model 4101 airplanes. This proposed AD was prompted by a report of an improperly installed spacer around the electrical pins in the cartridge connector for the fire bottle extinguisher cartridge. This proposed AD would require repetitive inspections for excessive or missing spacers, and applicable corrective actions. We are proposing this AD to address the unsafe condition on these products.

This notice contains a summary of a petition seeking relief from specified requirements of Federal Aviation Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, the FAA's exemption process. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.

This action modifies VHF Omnidirectional Range (VOR) Federal airway V-316 in the vicinity of Newberry, MI. The FAA is taking this action due to the planned decommissioning of the Newberry, MI, VOR/ Distance Measuring Equipment (VOR/DME) navigation aid (NAVAID), which provides navigation guidance for portions of the above route. The Newberry VOR/DME is a non-federal NAVAID owned by the State of Michigan that is planned to be decommissioned in September 2018.

This action changes the time of designation and controlling agency of restricted area R-2302, Flagstaff AZ. The FAA is taking this administrative action in response to the United States Army's limited utilization of the airspace while updating the responsible controlling agency. There are no changes to the boundaries; designated altitudes; or activities conducted within the affected restricted area.

This rulemaking relieves burdens on pilots seeking to obtain aeronautical experience, training, and certification by increasing the allowed use of aviation training devices. Use of these training devices has proven to be an effective, safe, and affordable means of obtaining pilot experience. This rulemaking also addresses changing technologies by accommodating the use of technically advanced airplanes as an alternative to the use of older complex single engine airplanes for the commercial pilot training and testing requirements. Additionally, this rulemaking broadens the opportunities for military instructor pilots or pilot examiners to obtain civilian ratings based on military experience, expands opportunities for logging pilot time, and removes a burden from sport pilot instructors by permitting them to serve as safety pilots. Finally, this rulemaking includes changes to some of the provisions established in an August 2009 final rule. These actions are necessary to bring the regulations in line with current needs and activities of the general aviation training community and pilots.

This amendment adopts miscellaneous amendments to the required IFR (instrument flight rules) altitudes and changeover points for certain Federal airways, jet routes, or direct routes for which a minimum or maximum en route authorized IFR altitude is prescribed. This regulatory action is needed because of changes occurring in the National Airspace System. These changes are designed to provide for the safe and efficient use of the navigable airspace under instrument conditions in the affected areas.

This action proposes special conditions for Ultramagic S.A. Model M-56, M-56C, M-65, M-65C, M-77, M-77C, M-90, M-105, M-120, M-130, M-145, M-160, N-180, N-210, N-250, N-300, N-355, N-425, S-70, S-90, S- 105, S-130, S-160, T-150, T-180, T-210, V-56, V-65, V-77, V-90, and V- 105 balloons. These balloons will have novel or unusual design features associated with a standard construction basket with a singular distribution that includes four occupant seats and a lower sidewall. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for these design features. These proposed special conditions contain the additional safety standards the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew an information collection. The Federal Register Notice with a 60-day comment period soliciting comments on the following collection of information was published on March 28, 2018. The information is used to determine if applicants satisfy requirements for obtaining a launch license to protect the public from risks associated with reentry operations from a site not operated by or situated on a Federal launch range.

We propose to adopt a new airworthiness directive (AD) for certain Airbus Defense and Space S.A. Model C-212-CB, C-212-CC, C-212- CD, C-212-CE, and C-212-DF airplanes. This proposed AD was prompted by reports of failures of the rudder pedal control system support. This proposed AD would require repetitive detailed visual inspections of the rudder pedal control system support box and shaft and applicable corrective actions. We are proposing this AD to address the unsafe condition on these products.

This action modifies VHF Omnidirectional Range (VOR) Federal airways V-2, V-26, V-84, V-218, and V-510 in the vicinity of Lansing, MI, and removes airway V-410 in the vicinity of Pontiac, MI. These modifications are required due to the planned decommissioning of the Lansing, MI, VHF Omnidirectional Range/Tactical Air Navigation (VORTAC) and the Pontiac, MI, VORTAC navigation aids, which provide navigation guidance for portions of the above routes.

This action amends Class E airspace at Duplin County Airport, Kenansville, NC, to accommodate airspace reconfiguration due to the decommissioning of the Kenan non-directional radio beacon (NDB), and cancellation of the NDB approach. Controlled airspace is necessary for the safety and management of instrument flight rules (IFR) operations at this airport. This action also updates the geographic coordinates of this airport.

This action proposes to amend Class E airspace extending upward from 700 feet or more above the surface at Bloomsburg, PA, due to the decommissioning of the Milton very high frequency omni- directional range collocated tactical air navigation aid (VORTAC) which requires airspace reconfiguration at Bloomsburg Municipal Airport. Controlled airspace is necessary for the safety and management of instrument flight rules (IFR) operations at the airport. This action also would update the geographic coordinates of the airport.

We propose to adopt a new airworthiness directive (AD) for certain Bombardier, Inc., Model DHC-8-400 series airplanes. This proposed AD was prompted by a report of broken P-clamps on the pressure relief line and the motive flow line in the left and right fuel tanks, and fouling conditions between the motive flow line and the collector tank partition wall in both fuel tanks. This proposed AD would require, depending on airplane configuration: Increasing the hole size in the collector tank partition wall, inspecting the motive flow line for damage, and replacing the associated grommet and motive flow line; replacing the affected single nut plate brackets and standoffs at the affected stations on the motive flow line and pressure relief line; and inspecting the motive flow line and vent line at certain wing stations, and inspecting the fuel tubes, to verify that an appropriate clearance has been maintained between the fuel tubes and their support brackets, and applicable corrective actions. We are proposing this AD to address the unsafe condition on these products.

We propose to adopt a new airworthiness directive (AD) for all Dassault Aviation Model MYSTERE-FALCON 200 airplanes. This proposed AD was prompted by a determination that more restrictive maintenance requirements and airworthiness limitations are necessary. This proposed AD would require revising the maintenance or inspection program, as applicable, to incorporate new or more restrictive maintenance requirements and airworthiness limitations. We are proposing this AD to address the unsafe condition on these products.

We propose to supersede Airworthiness Directive (AD) 88-12-10, which applies to certain Honeywell International Inc. (Honeywell) TPE331 turboprop engines. AD 88-12-10 requires reducing the life limit for certain second stage turbine rotors. Since we issued AD 88-12-10, we received a report that a TPE331-11U engine experienced an uncontained rotor separation. In addition, cracks were discovered through eddy current inspection (ECI) in the bore of the second stage turbine rotor assembly after publication of AD 88-12-10. This proposed AD would require removing certain second stage turbine rotors from service at a reduced life limit. We are proposing this AD to address the unsafe condition on these products.

This action streamlines and improves commercial space transportation regulations' general rulemaking and petition procedures to better reflect current practice; reorganizes the regulations for clarity and flow; and allows petitioners to file their petitions to the FAA's Office of Commercial Space Transportation electronically. Further, it expands the option to satisfy commercial space transportation requirements by demonstrating an equivalent level of safety to the regulatory requirements. These changes are necessary to ensure that the regulations regarding petitions are clear and current, and that the commercial space launch industry is more easily able to request approvals of safe alternative means of regulatory compliance.

We are adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-100-1A10 airplanes. This AD was prompted by a report indicating that certain lanyards for the passenger oxygen masks located in the airplane's entry area are too long. This AD requires replacement of certain oxygen mask lanyards with shorter lanyards. We are issuing this AD to address the unsafe condition on these products.

This action amends Class D airspace, Class E surface airspace, and Class E airspace extending upward from 700 feet above the surface; and removes Class E airspace designated as an extension to a Class D surface area; at Greater Binghamton Airport/Edwin A. Link Field (formerly Binghamton Regional Airport/Edwin A. Link Field), Binghamton, NY. This action accommodates airspace reconfiguration due to the decommissioning of the Binghamton VHF omni-directional radio range tactical air navigation aid (VORTAC), and cancellation of the VOR approaches. Controlled airspace is necessary for the safety and management of instrument flight rules (IFR) operations at the airport. This action also updates the geographic coordinates of the airport, and corrects the airport's name. Additionally, this action replaces the outdated term ``Airport/Facility Directory'' with the term ``Chart Supplement'' in Class D and E surface airspace descriptions.

We propose to supersede Airworthiness Directive (AD) 2015-23- 03 for Pacific Aerospace Limited Model 750XL airplanes. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as fatigue cracks on the fin forward pickup plates. We are issuing this proposed AD to require actions to address the unsafe condition on these products.