Federal Aviation Administration January 26, 2018 – Federal Register Recent Federal Regulation Documents
Results 1 - 9 of 9
Twenty Third Meeting of the NextGen Advisory Committee (NAC)
The FAA is issuing this notice to advise the public of the Twenty Third Meeting of the NextGen Advisory Committee. The NAC is a subcommittee to RTCA.
Airworthiness Directives; Airbus Airplanes
We are superseding Airworthiness Directive (AD) 2016-02-01, which applied to certain Airbus Model A320-211, -212, and -231 airplanes. AD 2016-02-01 required repetitive inspections to detect cracks of the pressurized floor fittings at a certain frame, and renewal of the zone protective finish or replacement of fittings with new fittings if necessary. AD 2016-02-01 also provided an optional modification that was terminating action for the repetitive inspections. This new AD retains the requirements of AD 2016-02-01, and requires accomplishment of the modification that was optional in AD 2016-02-01. This AD was prompted by the results of an additional fatigue analysis of cracking of the pressurized floor fittings and a determination that the optional modification should become a required action. We are issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus Helicopters
We are adopting a new airworthiness directive (AD) for Airbus Helicopters Model AS350B, AS350BA, AS350B1, AS350B2, AS350B3, AS350D, AS355E, AS355F, AS355F1, AS355F2, AS355N, AS355NP, EC130B4, and EC130T2 helicopters. This AD requires inspecting the main rotor (M/R) mast jet oil lubrication hose (oil hose). This AD is prompted by a report of a blocked oil hose. The actions of this AD are intended to prevent an unsafe condition on these helicopters.
Airworthiness Directives; Bell Helicopter Textron Inc.
We propose to adopt a new airworthiness directive (AD) for Bell Helicopter Textron Inc. (Bell) Model 212, Model 412, and Model 412EP helicopters. This proposed AD would require replacing the emergency flotation system (EFS) tube assembly. This proposed AD is prompted by a report of an EFS tube assembly failure. The actions of this proposed AD are intended to address an unsafe condition on these helicopters.
Airworthiness Directives; Bell Helicopter Textron Canada Limited Helicopters
We propose to adopt a new airworthiness directive (AD) for certain serial numbered Bell Helicopter Textron Canada Limited (BHTC) Model 429 helicopters. This proposed AD would require marking a serial number on life-limited forward spars and actuator fitting assemblies. The actions of this proposed AD are intended to prevent an unsafe condition on these products.
Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
This rule amends, suspends, or removes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide for the safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
This rule establishes, amends, suspends, or removes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures (ODPs) for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
This rule amends, suspends, or removes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide for the safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
This rule establishes, amends, suspends, or removes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures (ODPs) for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
