Federal Aviation Administration 2016 – Federal Register Recent Federal Regulation Documents

Results 151 - 200 of 1,608
Sixteenth Meeting of the RTCA Tactical Operations Committee
Document Number: 2016-28286
Type: Notice
Date: 2016-11-25
Agency: Federal Aviation Administration, Department of Transportation
The FAA is issuing this notice to advise the public of the Sixteenth Meeting of the RTCA Tactical Operations Committee.
Amendment of Amendment of Class D and E Airspace for the Following Texas Towns; Georgetown, TX; Corpus Christi, TX; Dallas/Fort Worth, TX; Gainesville, TX; Graford, TX; Hebbronville, TX; and Jasper, TX
Document Number: 2016-28284
Type: Rule
Date: 2016-11-25
Agency: Federal Aviation Administration, Department of Transportation
This action modifies Class D airspace at Georgetown Municipal Airport, Georgetown, TX, and Class E airspace extending upward from 700 feet above the surface at Rockport Aransas County Airport, Corpus Christi, TX; Lancaster Airport, Dallas/Fort Worth, TX; Gainesville Municipal Airport, Gainesville, TX; Georgetown Municipal Airport, Georgetown, TX; (Hebbronville, TX) O.S. Wyatt Airport, Realitos, TX; and Jasper County-Bell Field, Jasper, TX. Decommissioning of non- directional radio beacons (NDB), cancellation of NDB approaches, and implementation of area navigation (RNAV) procedures have made this action necessary for the safety and management of Instrument Flight Rules (IFR) operations at the above airports. This action also updates the geographic coordinates for Corpus Christi International Airport; the Corpus Christi VORTAC; Aransas County Airport, Rockport, TX; Nueces County Airport, Robstown, TX; Dallas/Fort Worth International Airport, Dallas/Fort Worth, TX; McKinney National Airport, McKinney, TX; Lancaster Airport; Bourland Field Airport, Fort Worth, TX; Jasper County-Bell Field; and Alfred C. `Bubba' Thomas (formerly San Patricio County Airport), Sinton, TX, to coincide with the FAA's aeronautical database. Also, the names of McCampbell-Porter Airport (formerly T.P. McCampbell Airport); McKinney National Airport (formerly Collin County Regional Airport); Ralph M. Hall/Rockwall Municipal Airport (formerly Rockwall Municipal Airport); and Alfred C. `Bubba' Thomas (formerly San Patricio County Airport) are being updated to coincide with the FAA's aeronautical database.
Establishment of Class E Airspace, Silver Springs, NV
Document Number: 2016-28277
Type: Rule
Date: 2016-11-25
Agency: Federal Aviation Administration, Department of Transportation
This action establishes Class E airspace extending upward from 700 feet above the surface at Silver Springs Airport, Silver Springs, NV. The FAA found establishment of airspace necessary for the safety and management of Instrument Flight Rules (IFR) operations under new Area Navigation (RNAV) Standard Instrument Approach Procedures at the airport.
Airworthiness Directives; The Boeing Company Airplanes
Document Number: 2016-28059
Type: Rule
Date: 2016-11-25
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for certain The Boeing Company Model 747-8 and 747-8F series airplanes. This AD was prompted by a report that static strength analysis has shown that the aluminum transmission aft bearing plate assemblies have inadequate structural strength for one or more of the required load cases. This AD requires removing aluminum transmission aft bearing plate assemblies from the flap track and installing titanium transmission aft bearing plate assemblies to the flap track. We are issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Bombardier, Inc. Airplanes
Document Number: 2016-28054
Type: Rule
Date: 2016-11-25
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for certain Bombardier, Inc. Model DHC-8-102, -103, and -106 airplanes; and Model DHC-8-200 and -300 series airplanes. This AD was prompted by a report of heat damage found on a nacelle firewall after an unsuccessful engine ground start and several events of heat damage found on direct current starter/generator terminal block assemblies. This AD requires an inspection to detect damage on the nacelle firewalls and the terminal block assemblies and to make sure the insulating sleeves are installed and have no damage, and corrective action if necessary. We are issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Sikorsky Aircraft Corporation Helicopters
Document Number: 2016-27771
Type: Rule
Date: 2016-11-25
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for Sikorsky Aircraft Corporation Model S-76D helicopters. This AD requires revising the rotorcraft flight manual (RFM) to prohibit Barometric Altitude Hold (ALT) mode beyond a certain rate of climb or descent. This AD is prompted by a report of the autopilot being unable to maintain level flight during certain flight conditions. The actions specified by this AD are intended to prevent a significant pilot workload increase, pilot disorientation, and subsequent loss of control of the helicopter.
Airworthiness Directives; Bombardier, Inc. Airplanes
Document Number: 2016-27643
Type: Rule
Date: 2016-11-25
Agency: Federal Aviation Administration, Department of Transportation
We are superseding Airworthiness Directive (AD) 2013-02-08 for all Bombardier, Inc. Model CL-600-2B19 (Regional Jet Series 100 & 440) airplanes. AD 2013-02-08 required inspection of the trunnions and upper and lower pins of the horizontal stabilizer trim actuator (HSTA), and replacement or re-identification if necessary; and revision of the maintenance program to include safe life limits and inspection requirements for the HSTA. This new AD requires certain actions related to the trunnions and pins for the HSTA, revising the maintenance or inspection program, and removing certain airplanes from the applicability. This AD was prompted by a determination that not all affected attachment pins and trunnions were included in the inspections required by AD 2016-02-08, and that incorrect attachment hardware may have been used in replacements on certain airplanes. We are issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; The Boeing Company Airplanes
Document Number: 2016-27640
Type: Rule
Date: 2016-11-25
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for all The Boeing Company Model 737-400 series airplanes. This AD was prompted by reports of cracks in the upper chord of the overwing stub beams at body station (STA) 578 emanating from the rivet location common to the crease beam inner chord and the overwing stub beam upper chord. This AD requires repetitive inspections for cracking, and related investigative and corrective actions if necessary. We are issuing this AD to prevent the unsafe condition on these products.
Airworthiness Directives; Airbus Helicopters (Previously Eurocopter France) Helicopters
Document Number: 2016-27639
Type: Proposed Rule
Date: 2016-11-25
Agency: Federal Aviation Administration, Department of Transportation
The FAA is withdrawing a notice of proposed rulemaking (NPRM). The NPRM proposed to supersede airworthiness directive (AD) 2007-25-08 for Eurocopter France (now Airbus Helicopters) Model SA-365N1, AS- 365N2, AS 365 N3, SA-366G1, EC 155B, and EC155B1 helicopters. The proposed actions were intended to prevent damage to the tail gearbox (TGB) control shaft and rod assembly bearing resulting in end play, loss of tail rotor pitch control, and subsequent loss of control of the helicopter. Since we issued the NPRM, we have received reports of new occurrences of loss of yaw control due to failure of the control rod bearing and determined that different actions at shorter time intervals are necessary to correct the unsafe condition. Accordingly, we withdraw the proposed rule.
Airworthiness Directives; Airbus Helicopters (Previously Eurocopter France) Helicopters
Document Number: 2016-27638
Type: Rule
Date: 2016-11-25
Agency: Federal Aviation Administration, Department of Transportation
We are superseding Airworthiness Directive (AD) 2007-25-08 for Eurocopter France (now Airbus Helicopters) Model SA-365N1, AS-365N2, AS 365 N3, SA-366G1, EC 155B, and EC155B1 helicopters. AD 2007-25-08 required checking the tail rotor gearbox (TGB) oil, inspecting the magnetic plug, and either replacing the TGB or performing additional inspections. This AD was prompted by reports of new occurrences of loss of yaw control due to failure of the control rod bearing. This AD requires checking the TGB oil level and replacing the bearing with a new part-numbered bearing. These actions are intended to detect and prevent damage to the bearing resulting in end play, loss of tail rotor pitch control, and subsequent loss of control of the helicopter.
Airworthiness Directives; Airbus Defense and Space S.A. (Formerly Known as Construcciones Aeronauticas, S.A.) Airplanes
Document Number: 2016-27307
Type: Proposed Rule
Date: 2016-11-25
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for all Airbus Defense and Space S.A. Model CN-235, CN 235-100, CN 235-200, and CN 235-300 airplanes, and Model C-295 airplanes. This proposed AD was prompted by leakage of a motorized cross-feed fuel valve. This proposed AD would require an inspection of the affected fuel valves and, depending on findings, applicable corrective action(s). We are proposing this AD to detect and correct leaks in a motorized cross-feed fuel valve, which could lead to failure of the fuel valve and consequent improper fuel system functioning or, in case of the presence of an ignition source, an airplane fire.
Airworthiness Directives; The Boeing Company Airplanes
Document Number: 2016-26809
Type: Rule
Date: 2016-11-25
Agency: Federal Aviation Administration, Department of Transportation
We are superseding Airworthiness Directive (AD) 2006-19-12 for certain The Boeing Company Model 777-200 and -300 series airplanes. AD 2006-19-12 required inspecting the lower web of the aft fairing of the engine struts for any discoloration, and doing related investigative and corrective actions if necessary; inspecting the heat shield castings for any damage and doing corrective action if necessary; installing gap cover strips; and replacing insulation blankets with new insulation blankets. This new AD retains those requirements and also requires, depending on airplane configuration, one-time or repetitive detailed inspections for cracking and deformation, as applicable, of the aft fairing lower structure, and one-time or repetitive conductivity inspections of the aft fairing lower structure, and related investigative and corrective actions if necessary. This new AD also adds airplanes to the applicability. This AD was prompted by a report that an aft fairing lower spar web exceeded the allowable conductivity limits. We are issuing this AD to address the unsafe condition on these products.
Approval of Noise Compatibility Program for Bob Hope Airport, Burbank, California
Document Number: 2016-28291
Type: Notice
Date: 2016-11-23
Agency: Federal Aviation Administration, Department of Transportation
The Federal Aviation Administration (FAA) announces its findings on the noise compatibility program submitted by Burbank- Glendale-Pasadena Airport Authority under the provisions of 49 U.S.C. 47501 et seq. (formerly the Aviation Safety and Noise Abatement Act, hereinafter referred to as ``the Act'') and 14 Code of Federal Regulations (CFR) Part 150 (hereinafter referred to as ``Part 150''). These findings are made in recognition of the description of Federal and nonfederal responsibilities in Senate Report No. 96-52 (1990). On October 10, 2013, the FAA determined that the noise exposure maps submitted by Burbank-Glendale-Pasadena Airport Authority under Part 150 were in compliance with applicable requirements. On October 24, 2016, the FAA approved the Bob Hope Airport noise compatibility program. Fifteen (15) of the eighteen (18) total number of recommendations of the program were approved. Two (2) of the eighteen (18) total number of recommendations of the program were approved in part. For one (1) of the eighteen (18) program measures there was no action required at this time. No program elements relating to new or revised flight procedures for noise abatement were proposed by the airport operator.
Special Conditions: Cranfield Aerospace Limited, Cessna Aircraft Company Model 525; Tamarack Load Alleviation System and Cranfield Winglets-Interaction of Systems and Structures
Document Number: 2016-28016
Type: Proposed Rule
Date: 2016-11-22
Agency: Federal Aviation Administration, Department of Transportation
This action proposes special conditions for the Cessna Aircraft Company model 525 airplane. This airplane as modified by Cranfield Aerospace Limited will have a novel or unusual design features associated with the installation of a Tamarack Active Technology Load Alleviation System and Cranfield Winglets. These design features will include winglets and an Active Technology Load Alleviation System. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These proposed special conditions contain the additional safety standards the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.
Rotorcraft Pilot Compartment View; Extension of Comment Period
Document Number: 2016-27966
Type: Proposed Rule
Date: 2016-11-22
Agency: Federal Aviation Administration, Department of Transportation
This action reopens the comment period for an NPRM that was published on October 17, 2016. In that document, the FAA proposed to revise its rules for pilot compartment view to allow ground tests to demonstrate compliance for night operations. The FAA is extending the comment period closing date to allow time to adequately analyze the draft advisory circulars (ACs) associated with the proposed rule and prepare comments.
Airworthiness Directives; BRP-Powertrain GmbH & Co KG Reciprocating Engines
Document Number: 2016-27922
Type: Rule
Date: 2016-11-22
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for certain BRP-Powertrain GmbH & Co KG Rotax 912 F2, 912 F3, 912 F4, 912 S2, 912 S3, 912 S4, 914 F2, 914 F3, and 914 F4 reciprocating engines. This AD requires replacement of any affected carburetor float with a float that is eligible for installation. This AD was prompted by a report of a quality escape in the manufacturing of the affected floats. We are issuing this AD to prevent failure of the carburetor float, failure of the engine, in-flight shutdown, and loss of the airplane.
Proposed Establishment of Class E Airspace; Kill Devil Hills, NC
Document Number: 2016-27859
Type: Proposed Rule
Date: 2016-11-22
Agency: Federal Aviation Administration, Department of Transportation
This action proposes to establish Class E airspace at Kill Devil Hills, NC, to accommodate new Area Navigation (RNAV) Global Positioning System (GPS) Standard Instrument Approach Procedures (SIAPs) serving First Flight Airport. Controlled airspace is necessary for the safety and management of instrument flight rules (IFR) operations at the heliport.
Proposed Establishment of Class E Airspace, Manti, UT
Document Number: 2016-27858
Type: Proposed Rule
Date: 2016-11-22
Agency: Federal Aviation Administration, Department of Transportation
This action proposes to establish Class E airspace extending upward from 700 feet above the surface at Manti-Ephraim Airport, Manti, UT, to accommodate new Instrument Flight Rules (IFR) operations for standard instrument approach and departure procedures. The establishment of Class E airspace is necessary to support the safety and management of IFR operations at the airport.
Amendment of Class D and Class E Airspace; Savannah, GA
Document Number: 2016-27856
Type: Rule
Date: 2016-11-22
Agency: Federal Aviation Administration, Department of Transportation
This action amends Class D and Class E airspace at Savannah, GA, by adjusting the geographic coordinates of Hunter Army Airfield (AAF), and updating the name of Savannah/Hilton Head International Airport. The boundaries and operating requirements of these airports remain the same.
Airworthiness Directives; Various Restricted Category Helicopters
Document Number: 2016-27767
Type: Rule
Date: 2016-11-22
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for various restricted category helicopters. This AD requires cleaning and visually inspecting certain main rotor (M/R) blades and, depending on the outcome of the inspections, repairing or replacing the M/R blades. This AD was prompted by a report of an M/R blade with multiple fatigue cracks around the blade retention bolt hole. The actions are intended to detect a crack in the M/R blade, and prevent failure of the M/R blade and subsequent loss of helicopter control.
Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
Document Number: 2016-27699
Type: Rule
Date: 2016-11-22
Agency: Federal Aviation Administration, Department of Transportation
This rule establishes, amends, suspends, or removes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures (ODPs) for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
Document Number: 2016-27698
Type: Rule
Date: 2016-11-22
Agency: Federal Aviation Administration, Department of Transportation
This rule establishes, amends, suspends, or removes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures (ODPs) for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Airworthiness Directives; The Boeing Company Airplanes
Document Number: 2016-26621
Type: Rule
Date: 2016-11-22
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for all The Boeing Company Model 737-600, -700, -700C, -800, -900, and -900ER series airplanes. This AD was prompted by an evaluation by the design approval holder (DAH) indicating that lap splices for certain stringers are subject to widespread fatigue damage (WFD). This AD requires repetitive inspections for cracking in the lower fastener row of the lap splices of certain stringers, and repair if necessary. We are issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Bombardier, Inc. Airplanes
Document Number: 2016-26618
Type: Rule
Date: 2016-11-22
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for certain Bombardier, Inc. Model CL-600-2C10 (Regional Jet Series 700, 701, and 702), CL-600-2D15 (Regional Jet Series 705), CL-600-2D24 (Regional Jet Series 900), and CL-600-2E25 (Regional Jet Series 1000) airplanes. This AD was prompted by a determination that wear and possible leakage of the high-pressure seal in the cylinder of the No. 3 hydraulic system reservoir could occur and cause high hydraulic fluid temperature and/or prevent the system from reaching normal operating pressure. This AD requires repetitive operational checks for wear and leakage of the high-pressure seal in the cylinder of the reservoir of the No. 3 hydraulic system, and corrective actions if necessary. We are issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; The Boeing Company Airplanes
Document Number: 2016-26614
Type: Rule
Date: 2016-11-22
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for certain The Boeing Company Model 787-8 airplanes. This AD was prompted by a report that the grounding jumpers between the environmental control system (ECS) bracket and the current return network (CRN) straps near certain passenger entry doors were not bonded correctly during manufacturing. This AD requires changing the configuration of the grounding jumpers connecting the ECS brackets and CRN straps; measuring the bond resistance; and doing related investigative and corrective actions if necessary. We are issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; The Boeing Company Airplanes
Document Number: 2016-26164
Type: Proposed Rule
Date: 2016-11-22
Agency: Federal Aviation Administration, Department of Transportation
We propose to supersede Airworthiness Directive (AD) 2008-12- 04, which applies to certain Boeing Model 737-600, -700, -700C, -800, and -900 series airplanes. AD 2008-12-04 currently requires various repetitive inspections to detect cracks along the chem-milled steps of the fuselage skin, and to detect missing or loose fasteners in the area of the preventive modification or repairs, replacement of the time- limited repair with the permanent repair if applicable, and applicable corrective actions, if necessary, which would end certain repetitive inspections. Since we issued AD 2008-12-04, an evaluation by the design approval holder (DAH) has indicated that the upper skin panel at the chem-milled step above the lap joint is subject to widespread fatigue damage (WFD) if the modification was installed after 30,000 total flight cycles. This proposed AD would reduce the post-modification inspection compliance times, limit installation of the preventive modification to airplanes with fewer than 30,000 total flight cycles, and add repetitive inspections for modified airplanes. We are proposing this AD to detect and correct cracking of the upper skin panel at the chem-milled step above the lap joint, which could result in reduced structural integrity of the airplane.
Airworthiness Directives; Airbus Airplanes
Document Number: 2016-25745
Type: Rule
Date: 2016-11-22
Agency: Federal Aviation Administration, Department of Transportation
We are superseding Airworthiness Directive (AD) 2013-25-08 for all Airbus Model A330-200, -200 Freighter, and -300 series airplanes; and Model A340-200 and -300 series airplanes. AD 2013-25-08 required a repetitive inspection program on certain check valves in the hydraulic systems that includes, among other things, inspections for lock wire presence and integrity, traces of seepage or black deposits, proper torque, alignment of the check valve and manifold, installation of new lock wire, and corrective actions if needed. This new AD removes airplanes from the applicability, and requires modifying the green, blue, and yellow high pressure hydraulic manifolds by replacing certain check valves with improved check valves, which terminates the repetitive inspections required by this AD. This AD was prompted by multiple reports of hydraulic line check valves loosening. We are issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Gulfstream Aerospace Corporation Airplanes
Document Number: 2016-25743
Type: Rule
Date: 2016-11-22
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for certain Gulfstream Aerospace Corporation Model GV and GV-SP airplanes. This AD was prompted by a new revision to the Airworthiness Limitations Section (ALS) of the Aircraft Maintenance Manual (AMM) based on fatigue and damage tolerance testing, and updated analysis. This AD requires revising the maintenance or inspection program to incorporate updated inspection requirements and life limits that address fatigue cracking of principal structural elements (PSEs). We are issuing this AD to ensure that fatigue cracking of PSEs is detected and corrected; such fatigue cracking could result in reduced structural integrity of the PSEs and critical components.
Special Conditions: Pilatus Aircraft, Ltd., Model PC-12, PC-12/45, and PC-12/47 Airplanes, Lithium Batteries
Document Number: 2016-28013
Type: Rule
Date: 2016-11-21
Agency: Federal Aviation Administration, Department of Transportation
These special conditions are issued for the Pilatus Aircraft, Ltd., Model PC-12, PC-12/45, and PC-12/47 airplanes. This airplane as modified by Finnoff Aviation will have a novel or unusual design feature associated with the installation of a rechargeable lithium battery. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.
Petition for Exemption; Summary of Petition Received; The Boeing Company
Document Number: 2016-27965
Type: Notice
Date: 2016-11-21
Agency: Federal Aviation Administration, Department of Transportation
This notice contains a summary of a petition seeking relief from specified requirements of Title 14, Code of Federal Regulations (14 CFR). The purpose of this notice is to improve the public's awareness of, and participation in, this aspect of the FAA's regulatory activities. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Petition for Exemption; Summary of Petition Received; The Boeing Company
Document Number: 2016-27964
Type: Notice
Date: 2016-11-21
Agency: Federal Aviation Administration, Department of Transportation
This notice contains a summary of a petition seeking relief from specified requirements of Title 14, Code of Federal Regulations (14 CFR). The purpose of this notice is to improve the public's awareness of, and participation in, this aspect of the FAA's regulatory activities. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Airworthiness Directives; Airbus Helicopters Deutschland GmbH
Document Number: 2016-27765
Type: Proposed Rule
Date: 2016-11-21
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for Airbus Helicopters Deutschland GmbH (Airbus Helicopters) MBB-BK 117 D-2 helicopters. This proposed AD would require repetitively inspecting the bushings of the inner and outer forward trusses of both engines. This proposed AD is prompted by reports of delaminated and worn engine mount bushings. The proposed actions are intended to detect delaminated engine mount bushings, which can lead to excessive vibration, cracking, failure of the engine mount front support pins, and loss of helicopter control.
Airworthiness Directives; Gulfstream Aerospace Corporation Airplanes
Document Number: 2016-27309
Type: Proposed Rule
Date: 2016-11-21
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for all Gulfstream Aerospace Corporation Model G-1159B airplanes. This proposed AD was prompted by a review of airplane maintenance records, which revealed that incorrect rudder assemblies were installed on certain airplanes. This proposed AD would require certain inspections, and replacement or modification of the rudder assembly if necessary. We are proposing this AD to address the unsafe condition on these products.
Ninety Seventh Plenary for RTCA SC-159 Navigation Equipment Using the Global Positioning System
Document Number: 2016-27796
Type: Notice
Date: 2016-11-18
Agency: Federal Aviation Administration, Department of Transportation
The FAA is issuing this notice to advise the public of a meeting of Ninety Seventh Plenary for RTCA SC-159 Navigation Equipment Using the Global Positioning System.
Thirtieth RTCA SC-216 Aeronautical Systems Security Plenary
Document Number: 2016-27795
Type: Notice
Date: 2016-11-18
Agency: Federal Aviation Administration, Department of Transportation
The FAA is issuing this notice to advise the public of a meeting of Thirtieth RTCA SC-216 Aeronautical Systems Security Plenary.
Thirteenth RTCA SC-231 TAWS Plenary
Document Number: 2016-27794
Type: Notice
Date: 2016-11-18
Agency: Federal Aviation Administration, Department of Transportation
The FAA is issuing this notice to advise the public of a meeting of Thirteenth RTCA SC-231 TAWS Plenary.
Sixteenth Meeting of the RTCA Tactical Operations Committee
Document Number: 2016-27793
Type: Notice
Date: 2016-11-18
Agency: Federal Aviation Administration, Department of Transportation
The FAA is issuing this notice to advise the public of the Sixteenth Meeting of the RTCA Tactical Operations Committee.
Thirteenth RTCA SC-228 Focused Plenary
Document Number: 2016-27730
Type: Notice
Date: 2016-11-18
Agency: Federal Aviation Administration, Department of Transportation
The FAA is issuing this notice to advise the public of a meeting of Thirteenth RTCA SC-228 Focused Plenary.
Forty Sixth RTCA SC-206 Aeronautical Information and Meteorological Data Link Services Plenary
Document Number: 2016-27717
Type: Notice
Date: 2016-11-18
Agency: Federal Aviation Administration, Department of Transportation
The FAA is issuing this notice to advise the public of a meeting of Forty Sixth RTCA SC-206 Aeronautical Information and Meteorological Data Link Services Plenary.
Forty Fifth RTCA SC-224 Airport Security Access Control Systems Plenary
Document Number: 2016-27716
Type: Notice
Date: 2016-11-18
Agency: Federal Aviation Administration, Department of Transportation
The FAA is issuing this notice to advise the public of a meeting of Forty Fifth RTCA SC-224 Airport Security Access Control Systems Plenary.
Sixteenth Meeting of the RTCA Tactical Operations Committee
Document Number: 2016-27715
Type: Notice
Date: 2016-11-18
Agency: Federal Aviation Administration, Department of Transportation
The FAA is issuing this notice to advise the public of the Sixteenth Meeting of the RTCA Tactical Operations Committee.
Airworthiness Directives; Zodiac Aero Evacuation Systems
Document Number: 2016-27626
Type: Proposed Rule
Date: 2016-11-18
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for Zodiac Aero Evacuation Systems fusible plugs installed on emergency evacuation equipment for various transport category airplanes. This proposed AD was prompted by reports indicating that affected fusible plugs activated (vented gas) below the rated temperature. This proposed AD would require an inspection of the fusible plugs to determine the part number, and lot number and replacement of all affected fusible plugs. We are proposing this AD to prevent the unsafe condition on these products.
Airworthiness Directives; Learjet Inc. Airplanes
Document Number: 2016-27532
Type: Proposed Rule
Date: 2016-11-18
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for certain Learjet Inc. Model 36A airplanes. This proposed AD was prompted by a report indicating that an aileron cable failed on an airplane during a tension check and a determination that Model 36A airplanes were not included in AD 2005-13-36, which addresses this issue for other Learjet Inc. airplanes. This proposed AD would require a one-time inspection of the center ball of the aileron control cables for a defective swage, and corrective actions if necessary. We are proposing this AD to prevent the unsafe condition on these products.
Airworthiness Directives; The Boeing Company Airplanes
Document Number: 2016-27531
Type: Proposed Rule
Date: 2016-11-18
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for all The Boeing Company Model 737-300, -400, and -500 series airplanes. This proposed AD was prompted by a report of a crack in a certain body station (BS) frame inboard chord during supplemental structural inspection document (SSID) inspections. This proposed AD would require repetitive detailed and high frequency eddy current (HFEC) inspections for any crack at the frame inboard chords, and repair if necessary. We are proposing this AD to prevent the unsafe condition on these products.
Airworthiness Directives; Various Aircraft Equipped With BRP-Powertrain GmbH & Co KG 912 A Series Engine
Document Number: 2016-27444
Type: Rule
Date: 2016-11-18
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for various aircraft equipped with a BRP-Powertrain GmbH & Co KG (formerly Rotax Aircraft Engines) 912 A series engine. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as a manufacturing defect found in certain carburetor floats where an in-flight engine shutdown and forced landing could occur when the affected cylinder had reduced or blocked fuel supply. We are issuing this AD to require actions to address the unsafe condition on these products.
Petition for Exemption; Summary of Petition Received, Airbus SAS
Document Number: 2016-27682
Type: Notice
Date: 2016-11-17
Agency: Federal Aviation Administration, Department of Transportation
This notice contains a summary of a petition seeking relief from specified requirements of Title 14, Code of Federal Regulations (14 CFR). The purpose of this notice is to improve the public's awareness of, and participation in, this aspect of the FAA's regulatory activities. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Petition for Exemption; Summary of Petition Received; Northrop Grumman Corporation
Document Number: 2016-27679
Type: Notice
Date: 2016-11-17
Agency: Federal Aviation Administration, Department of Transportation
This notice contains a summary of a petition seeking relief from specified requirements of Title 14, Code of Federal Regulations (14 CFR). The purpose of this notice is to improve the public's awareness of, and participation in, this aspect of the FAA's regulatory activities. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Petition for Exemption; Summary of Petition Received; Page, Andrew K.
Document Number: 2016-27678
Type: Notice
Date: 2016-11-17
Agency: Federal Aviation Administration, Department of Transportation
This notice contains a summary of a petition seeking relief from specified requirements of Title 14 of the Code of Federal Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, the FAA's exemption process. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Airworthiness Directives; Fokker Services B.V. Airplanes
Document Number: 2016-27529
Type: Proposed Rule
Date: 2016-11-17
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new Airworthiness Directive (AD) for all Fokker Services B.V. Model F28 Mark 0100 series airplanes. This proposed AD was prompted by an evaluation by the design approval holder (DAH) indicating that certain wing fuel tank access panels are subject to widespread fatigue damage (WFD). This proposed AD would require replacement of affected access panels and modification of the coamings of the associated access holes. We are proposing this AD to prevent the unsafe condition on these products.
Airworthiness Directives; The Boeing Company Airplanes
Document Number: 2016-27310
Type: Proposed Rule
Date: 2016-11-17
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for certain The Boeing Company Model 777-300ER series airplanes. This proposed AD was prompted by a report that certain galley tripod mount assemblies were not connected to the tie rods in the overhead support structure. This proposed AD would require an inspection of certain galleys for the presence of the hardware that connects the tripod mount assembly to the tie rods in the overhead support structure, and corrective actions if necessary. We are proposing this AD to address the unsafe condition on these products.