Federal Aviation Administration September 1, 2016 – Federal Register Recent Federal Regulation Documents

Special Conditions: Bombardier Aerospace Inc. Model BD-700-2A12 and BD-700-2A13 Airplanes; Sidestick Controllers
Document Number: 2016-21123
Type: Rule
Date: 2016-09-01
Agency: Federal Aviation Administration, Department of Transportation
These special conditions are issued for the Bombardier Aerospace Inc. (Bombardier) Model BD-700-2A12 and BD-700-2A13 airplanes. These airplanes will have a novel or unusual feature when compared to the state of technology envisioned in the airworthiness standards for transport-category airplanes. This design feature is a sidestick controller, designed to be operated with only one hand, in lieu of the conventional wheel or stick controls. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.
Special Conditions: Bombardier Inc., Model BD-700-2A12 and BD-700-2A13 Airplanes; Interactions of Systems and Structures
Document Number: 2016-21122
Type: Rule
Date: 2016-09-01
Agency: Federal Aviation Administration, Department of Transportation
These special conditions are issued for the Bombardier Inc. (Bombardier) Model BD-700-2A12 and BD-700-2A13 airplanes. These airplanes will have novel or unusual features when compared to the state of technology envisioned in the airworthiness standards for transport-category airplanes. These design features include systems that, directly or as a result of failure or malfunction, affect structural performance. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for these design features. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.
FAA Approval of Noise Compatibility Program; Boise Air Terminal (Gowen Field) Boise, Idaho
Document Number: 2016-21105
Type: Notice
Date: 2016-09-01
Agency: Federal Aviation Administration, Department of Transportation
The Federal Aviation Administration (FAA) announces its findings (Record of Approval) on the noise compatibility program submitted by the City of Boise, Idaho for the Boise Air Terminal (Gowen Field) under the provisions of 49 U.S.C. (the Aviation Safety and Noise Abatement Act, hereinafter referred to as ``the Act'') and 14 CFR part 150 (Part 150). On May 2, 2016, the FAA determined that the noise exposure maps submitted by the City of Boise for the Boise Air Terminal under Part 150 were in compliance with applicable requirements. On August 24, 2016 the FAA approved the Boise Airport Noise Compatibility Program. Seven of the 13 measures recommended in the noise compatibility plan were approved and six measures were disapproved for the purposes of Part 150. In addition, 22 measures were included in the noise compatibility plan that requested no FAA action as they were approved in a previous record of approval, were removed from consideration, or disapproved in a previous record of approval. These measures and FAA's associated determinations are summarized in the attachment to the Record of Approval.
Special Conditions: Bombardier Inc. Model BD-700-2A12 and BD-700-2A13 Airplanes; Hydrophobic Coatings in Lieu of Windshield Wipers
Document Number: 2016-21079
Type: Rule
Date: 2016-09-01
Agency: Federal Aviation Administration, Department of Transportation
These special conditions are issued for the Bombardier Inc. (Bombardier) Model BD-700-2A12 and BD-700-2A13 airplanes. These airplanes will have a novel or unusual feature when compared to the state of technology envisioned in the airworthiness standards for transport category airplanes. This design feature is hydrophobic coatings in lieu of windshield wipers. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for these design features. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.
First Meeting of the Drone Advisory Committee (DAC)
Document Number: 2016-21013
Type: Notice
Date: 2016-09-01
Agency: Federal Aviation Administration, Department of Transportation
The FAA is issuing this notice to advise the public of the First Meeting of the Drone Advisory Committee (DAC).
Airworthiness Directives; Airbus Airplanes
Document Number: 2016-20991
Type: Rule
Date: 2016-09-01
Agency: Federal Aviation Administration, Department of Transportation
The FAA is correcting an airworthiness directive (AD) that published in the Federal Register. That AD applies to certain Airbus Model A330-200 Freighter, -200, and -300 series airplanes. Paragraphs (i) and (l) of the regulatory text contain typographical errors in the service bulletin number. This document corrects those errors. In all other respects, the original document remains the same.
Airworthiness Directives; PILATUS AIRCRAFT LTD. Airplanes
Document Number: 2016-20833
Type: Rule
Date: 2016-09-01
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for PILATUS AIRCRAFT LTD. Models PC-12, PC-12/45, PC-12/47, and PC-12/47E airplanes installed with an affected engine mounting frame assembly. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as longitudinal material separation on the internal surface of the engine mounting frame assembly tubes. We are issuing this AD to detect and correct this condition, which could lead to partial or complete failure of the structural joint and possibly result in in-flight detachment of the engine with consequent loss of control.
Airworthiness Directives; Bombardier, Inc. Airplanes
Document Number: 2016-20826
Type: Rule
Date: 2016-09-01
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for certain Bombardier, Inc. Model CL-600-2B19 (Regional Jet Series 100 & 440) airplanes. This AD was prompted by two in-service incidents of a loss of all air data information in the flight deck. This AD requires a revision of the airplane flight manual (AFM) emergency procedures section to provide procedures to guide the crew on how to stabilize the airplane airspeed and attitude for continued safe flight when a loss of all air data information has occurred in the flight deck. We are issuing this AD to prevent loss of control when a loss of all air data information has occurred in the flight deck.
Airworthiness Directives; The Boeing Company Airplanes
Document Number: 2016-20825
Type: Rule
Date: 2016-09-01
Agency: Federal Aviation Administration, Department of Transportation
We are superseding Airworthiness Directive (AD) 2013-24-12 for all The Boeing Company Model 747-8 and 747-8F airplanes. AD 2013-24-12 required repetitive ultrasonic or dye penetrant inspections for cracking of the barrel nuts and bolts on each forward engine mount, and related investigative and corrective actions if necessary. This new AD retains the requirements of AD 2013-24-12 and also requires installing new barrel nuts at the forward engine mounts; or identifying the part number of the barrel nuts, inspecting affected barrel nuts for gaps of the strut bulkhead and forward engine mount, and doing related investigative and corrective actions if necessary. This new AD also removes airplanes from the applicability. This new AD also requires revising the maintenance or inspection program, as applicable, to include a new structurally significant item. This AD was prompted by our determination that it is necessary to mandate the installation of new barrel nuts or new inspections to adequately address the unsafe condition. We are issuing this AD to detect and correct cracked barrel nuts on a forward engine mount, which could result in reduced load capacity of the forward engine mount, separation of an engine under power from the airplane, and consequent loss of control of the airplane.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.