Federal Aviation Administration August 19, 2016 – Federal Register Recent Federal Regulation Documents
Results 1 - 11 of 11
Special Conditions: The Boeing Company, Boeing Model 737-8 Airplane; Non-Rechargeable Lithium Battery Installations
These special conditions are issued for the Boeing Company (Boeing) Model 737-8 airplane. This airplane will have a novel or unusual design feature when compared to the state of technology envisioned in the airworthiness standards for transport-category airplanes. This design feature is associated with non-rechargeable lithium battery installations. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.
Petition for Exemption; Summary of Petition Received; The Boeing Company
This notice contains a summary of a petition seeking relief from specified requirements of Title 14 of the Code of Federal Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, the FAA's exemption process. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Petition for Exemption; Summary of Petition Received; Delta Engineering
This notice contains a summary of a petition seeking relief from specified requirements of title 14 of the Code of Federal Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, the FAA's exemption process. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Petition for Exemption; Summary of Petition Received; The Boeing Company
This notice contains a summary of a petition seeking relief from specified requirements of title 14 of the Code of Federal Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, the FAA's exemption process. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Petition for Exemption; Summary of Petition Received; Airbus
This notice contains a summary of a petition seeking relief from specified requirements of Title 14 of the Code of Federal Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, the FAA's exemption process. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Notice of Intent To Prepare an Environmental Impact Statement (EIS) for the Proposed Airfield Safety Enhancement Project at Tucson International Airport, Tucson, Pima County, Arizona
The Federal Aviation Administration (FAA) is issuing this notice under the provisions of the National Environmental Policy Act (NEPA) of 1969, as amended to advise the public that an Environmental Impact Statement (EIS) will be prepared to assess the potential impacts of the proposed Airfield Safety Enhancement Project (ASEP) including real property transactions between the United States Air Force (USAF) and the Tucson Airport Authority (TAA); demolition of 12 Earth Covered Magazines (ECM); replacement of the ECMs elsewhere on USAF Plant 44; construction of a new parallel taxiway; relocation of Runway 11R-29L and other associated development at Tucson International Airport. The proposed project also includes transfer of land ultimately to the USAF, on behalf of the National Guard Bureau (NGB), for construction of a Munitions Storage Area and access road to support the 162nd Fighter Wing at Tucson Air National Guard Base. To ensure that all significant issues related to the proposed action are identified, one (1) public scoping meeting and one (1) governmental agency scoping meeting will be held. FAA is the lead agency on the preparation of the EIS and has invited the Department of the Air Force (USAF) and the National Guard Bureau (NGB) to participate as cooperating agencies because the Tucson Airport Authority's proposed action requires federal actions by both U.S. Department of Defense agencies.
Airspace Designations; Incorporation by Reference
This action amends Title 14 Code of Federal Regulations (14 CFR) part 71 relating to airspace designations to reflect the approval by the Director of the Federal Register of the incorporation by reference of FAA Order 7400.11A, Airspace Designations and Reporting Points. This action also explains the procedures the FAA will use to amend the listings of Class A, B, C, D, and E airspace areas; air traffic service routes; and reporting points incorporated by reference.
Airworthiness Directives; Airbus Airplanes
We are superseding Airworthiness Directive (AD) 2003-25-07 for certain Airbus Model A319 and A320 series airplanes, and AD 2005-13-39 for certain Airbus Model A321 series airplanes. AD 2003-25-07 required a revision to the airplane flight manual (AFM) and replacement of both elevator aileron computers (ELACs) having L80 standards with new ELACs having L81 standards. AD 2005-13-39 required a revision to the AFM, replacement of existing ELACs with ELACs having L83 or L91 standards, as applicable; and a concurrent action. Since we issued AD 2003-25-07 and AD 2005-13-39, we have determined that new ELAC standards must be incorporated. The ELAC standards have been upgraded to version L97+, which implements enhanced angle-of-attack (AOA) monitoring to better detect AOA blockage, including multiple AOA blockages. This AD requires replacing existing ELACs with new ELACs having L97+ standards or revising the software in an existing ELAC to the L97+ standards, as applicable, which terminates the requirements of AD 2003-25-07 and AD 2005-13-39. This AD also expands the applicability to include all Airbus Model A318, A319, A320, and A321 series airplanes. We are issuing this AD to prevent inadvertent activation of the AOA protections. Inadvertent activation of the AOA protections could result in a continuous nose-down pitch rate that could result in reduced controllability of the airplane.
Airworthiness Directives; Dassault Aviation Airplanes
We are adopting a new airworthiness directive (AD) for certain Dassault Aviation Model FALCON 900EX and FALCON 2000EX airplanes. This AD requires revising the airplane flight manual (AFM) to include procedures to follow when an airplane is operating in icing conditions. This AD also provides optional terminating action for the AFM revision. This AD was prompted by a design review of in-production airplanes that identified a deficiency in certain wing anti-ice system ducting. A deficiency in the wing anti-ice system ducting could lead to undetected, reduced performance of the wing anti-ice system, with potential ice accretion and ingestion, possibly resulting in degraded engine power and degraded handling characteristics of the airplane. We are issuing this AD to ensure the flight crew has procedures for operating an airplane in icing conditions.
Airworthiness Directives; Airbus Airplanes
We are superseding Airworthiness Directive (AD) 2013-20-11, for all Airbus Model A318, A319, A320, and A321 series airplanes. AD 2013-20-11 required modifying the passenger emergency oxygen container assembly. This new AD expands the affected group of oxygen containers to include those labeled ``DAe Systems.'' This AD was prompted by a determination that the unsafe condition also affects oxygen containers labeled ``DAe Systems.'' We are issuing this AD to prevent a high temperature oxygen generator and mask from falling down and possibly resulting in an ignition source in the passenger compartment, injury to passengers, and reduced availability of supplemental oxygen.
Airworthiness Directives; Bombardier, Inc. Airplanes
We are adopting a new airworthiness directive (AD) for certain Bombardier, Inc. Model DHC-8-400, -401, and -402 airplanes. This AD was prompted by reports of chafing damage due to insufficient clearance on the main landing gear (MLG) stabilizer brace, the nacelle A-frame structure, and the adjacent electrical wiring harnesses. An insufficient fillet radius may also exist on certain airplanes. This AD requires, depending on airplane configuration, an inspection of the nacelle A-frame structure for insufficient fillet radius; an inspection for cracking of affected structure, and rework or repair if necessary, and rework of the nacelle A-frame structure; repetitive inspections of the nacelle A-frame structure and the MLG stabilizer brace for insufficient clearance and damage, and repair if necessary, and rework of the nacelle A-frame structure, which would terminate the repetitive inspections; installation of new stop brackets and a shim on each MLG stabilizer brace assembly; and rework of the electrical wiring harnesses in the nacelle area. We are issuing this AD to detect and correct chafing damage and subsequent premature cracking and fracture of the nacelle A-frame structure, which could result in failure of the MLG stabilizer brace and loss of the MLG down-lock indication, which could adversely affect the safe landing of the airplane.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.