Federal Aviation Administration 2015 – Federal Register Recent Federal Regulation Documents

This notice contains a summary of a petition seeking relief from specified requirements of Title 14 of the Code of Federal Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, the FAA's exemption process. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.

This action establishes Class E airspace at Encinal, TX. Controlled airspace is necessary to accommodate new Standard Instrument Approach Procedures (SIAPs) at El Jardin Ranch Airport. The FAA is taking this action to enhance the safety and management of Instrument Flight Rules (IFR) operations for SIAPs at the airport.

This action amends Class D Airspace at Baltimore, MD, bringing current the regulatory text under the designation for Martin State Airport by adding the words ``and Restricted Area R-4001C, which is continuously active up to 10,000 feet AGL''. This is an administrative change to coincide with the FAA's aeronautical database.

We propose to adopt a new airworthiness directive (AD) for certain Rolls-Royce plc (RR) RB211-524B-02, RB211-524B2-19, RB211- 524B3-02, RB211-524B4-02, RB211-524B4-D-02, RB211-524C2-19, RB211- 524D4-19, RB211-524D4-39, and RB211-524D4X-19 turbofan engines. This proposed AD was prompted by several failures of affected high-pressure turbine (HPT) blades. This proposed AD would require removing affected HPT blades. We are proposing this AD to prevent failure of the HPT blade, which could lead to failure of one or more engines, loss of thrust control, and damage to the airplane.

We are superseding Airworthiness Directive (AD) 99-01-05 R1, which applied to certain aircraft equipped with wing lift struts. AD 99-01-05 R1 required repetitively inspecting the wing lift struts for corrosion; repetitively inspecting the wing lift strut forks for cracks; replacing any corroded wing lift strut; replacing any cracked wing lift strut fork; and repetitively replacing the wing lift strut forks at a specified time for certain airplanes. This new AD retains all requirements of AD 99-01-05R1 and adds additional airplane models to the Applicability section. This AD was prompted by a report that additional Piper Aircraft, Inc. model airplanes should be added to the Applicability section. We are issuing this AD to correct the unsafe condition on these products.

The FAA proposes to rule and invite public comment on the release of land at St. George Airport under the provisions of Section 125 of the Wendell H. Ford Aviation Investment Reform Act for the 21st Century (AIR 21), now 49 U.S.C. 47107(h)(2).

The FAA is withdrawing a previously published notice granting special conditions for the Honda Aircraft Company model HA-420 jet airplane. We are withdrawing Special Condition No. 23-227-SC through mutual agreement with Honda Aircraft Company.

We are superseding Airworthiness Directive (AD) 2014-26-53 and AD 2015-03-02 for certain Airbus Model A319-115, A319-133, A320-214, A320-232, and A320-233 airplanes. AD 2014-26-53 required repetitive detailed visual inspections to detect discrepancies of the wing lower skin surface and inboard main landing gear (MLG) support rib lower flange location fasteners and, depending on findings, accomplishment of applicable corrective action(s). AD 2015-03-02 required repetitive detailed visual inspections of the outboard MLG support rib lower flange fasteners for discrepancies, and corrective actions if necessary. This new AD retains the repetitive detailed visual inspections to detect discrepancies of the fasteners located in the wing lower skin surface and inboard MLG support rib lower flange with extended compliance times and repetitive intervals, and accomplishment of applicable corrective actions. This new AD also retains the repetitive detailed visual inspections of the outboard MLG support rib lower flange fasteners for discrepancies, and corrective actions if necessary. In addition, this new AD adds airplanes to the applicability. This AD was prompted by a determination that certain airplanes were missing from the applicability of AD 2014-26-53 and AD 2015-03-02 and that those airplanes may be affected by the unsafe condition addressed in AD 2014-26-53 and AD 2015-03-02. We are issuing this AD to detect and correct discrepancies of the fasteners at the external surface of the lower wing skin and inboard and outboard MLG support rib lower flanges, which could result in an airplane not meeting its maximum loads expected in service. This condition could result in structural failure.

We propose to supersede Airworthiness Directive (AD) 97-07-14, for certain Airbus Model A320-111, -211, and -231 airplanes. AD 97-07- 14 currently requires modification of an area on the front spar of the wing center section by installing shims and new fasteners to reinforce pressure floor fittings. Since we issued AD 97-07-14, we have determined the need for repetitive inspections on airplanes on which the modification of the rib flange on the front spar of the wing center section has been done. This proposed AD would continue to require modifying the rib flange on the front spar of the wing center section by installing shims and new fasteners to reinforce pressure floor fittings; and would require repetitive high frequency eddy current inspections for cracking of the radius of the rib flanges and vertical stiffener at frame 36, a rototest inspection for cracking of the fastener holes of the rib flanges, repair if needed, and adding additional airplanes to the applicability. We are proposing this AD to prevent fatigue cracking on the rib flange area of the front spar of the wing center section, which can reduce the structural integrity of fuselage frame 36 and the wing center section.

This action establishes Class E Airspace at West Creek, NJ, to accommodate new Area Navigation (RNAV) Global Positioning System (GPS) Standard Instrument Approach Procedures (SIAPs) serving Eagles Nest Airport. This action enhances the safety and management of Instrument Flight Rules (IFR) operations within the National Airspace System.

This action establishes Class E airspace at Cando, ND. Controlled airspace is necessary to accommodate new Standard Instrument Approach Procedures (SIAP) at Cando Municipal Airport. The FAA is taking this action to enhance the safety and management of Instrument Flight Rules (IFR) operations for SIAPs at the airport.

This action amends the legal description of the Baton Rouge, LA, VHF Omnidirectional Range/Tactical Air Navigation aid (VORTAC) located in Class E airspace at Baton Rouge, LA. The Baton Rouge VORTAC and Baton Rouge Metropolitan Airport, Ryan Field, have similar names and both share the same facility identifier but are not co-located. The FAA is renaming the Baton Rouge VORTAC as well as assigning a new facility identifier for the safety and management of aircraft operations within the Baton Rouge, LA, airspace area. This does not affect the boundaries or operating requirements of the airspace.

This action establishes Class E airspace at Cypress, TX. Controlled airspace is necessary to accommodate new Area Navigation (RNAV) Standard Instrument Approach Procedures (SIAPs) at Dry Creek Airport. The FAA is taking this action to enhance the safety and management of Instrument Flight Rules (IFR) operations for SIAPS at the airport.

This action proposes to amend Class E Airspace at Greenville, SC as new Standard Instrument Approach Procedures have been developed at Greenville Downtown Airport. This action would enhance the safety and management of Instrument Flight Rules (IFR) operations at the airport. This action also would update the geographic coordinates of the airport.

This action proposes to establish Class E Airspace at Defuniak Springs, FL, to accommodate new Area Navigation (RNAV) Global Positioning System (GPS) Standard Instrument Approach Procedures (SIAPs) serving Defuniak Springs Airport. Controlled airspace is necessary for the safety and management of instrument flight rules (IFR) operations at the airport.

This action amends Class E Airspace at Zephyrhills, FL, as the Zephyrhills Non-Directional Beacon (NDB) has been decommissioned, requiring airspace redesign at Zephyrhills Municipal Airport. This action enhances the safety and management of Instrument Flight Rules (IFR) operations at the airport. This action also updates the geographic coordinates of the airport.

We are superseding Airworthiness Directive (AD) 2013-26-05 for all Dassault Aviation Model FAN JET FALCON, FAN JET FALCON SERIES C, D, E, F, and G airplanes; Model MYSTERE-FALCON 200 airplanes; and Model MYSTERE-FALCON 20-C5, 20-D5, 20-E5, and 20-F5 airplanes. AD 2013-26-05 required repetitive weighing of fire extinguisher bottles having a certain part number, and eventual replacement of those bottles to terminate the repetitive weighing. This new AD continues to require repetitive weighing of fire extinguisher bottles having a certain part number, and eventual replacement of those bottles to terminate the repetitive weighing. This AD was prompted by our determination that certain text in the method of compliance language specified in AD 2013- 26-05 incorrectly refers to Airbus, instead of ``Dassault Aviation.'' We are issuing this AD to detect and correct a dormant failure in the fire suppression system, which could result in the inability to put out a fire in an engine, auxiliary power unit (APU), or rear compartment.

We propose to adopt a new airworthiness directive (AD) for certain Zodiac Aerotechnics (formerly Intertechnique Aircraft Systems) flightcrew oxygen mask regulators as installed on, but not limited to, various transport and small airplanes. This proposed AD was prompted by a report that improper maintenance on oxygen mask regulators was found. This proposed AD would require the identification and replacement of all potentially affected units. This proposed AD also would require installation of a placard and revision of the airplane flight manual to include an operational procedure for use in case of depressurization. We are proposing this AD to detect and correct affected oxygen mask regulators, which could lead to inadequate protection to the affected flightcrew against hypoxia. Hypoxia can start from a headache and drowsiness and lead eventually to unconsciousness with severe consequence in terms of airplane controllability.

Under the provisions of title 49, U.S.C. 47153(c), notice is being given that the FAA is considering a request from the City of Gulf Shores and the City of Gulf Shores Airport Authority to waive the requirement that a 11.48-acre parcel of surplus property, located at the Jack Edwards Airport, be used for aeronautical purposes.

This action corrects a final rule; technical amendment, published in the Federal Register on April 7, 2015, that made a correction to a typographical error to R-6703A, R-6703B, R-6703C, R- 6703D, R-6703E and R-6703F at Joint Base Lewis-McChord, WA. Due to a submission error, the abbreviation for West in the longitude description of restricted area R-6703A was entered as ``N''. This action corrects the boundary description of R-6703A by changing the longitude direction to ``W''.

We propose to adopt a new airworthiness directive (AD) for certain serial number GE Aviation Czech s.r.o. M601E-11, M601E-11A, and M601F turboprop engines with certain part number (P/N) gas generator turbine (GGT) blades, installed. This proposed AD was prompted by the determination that certain GGT blades are susceptible to blade failure. This proposed AD would require removing from service any affected engine with certain GGT blades installed. We are proposing this AD to prevent GGT blade failure, which could lead to engine failure and loss of the airplane.

We propose to adopt a new airworthiness directive (AD) for all Pratt & Whitney (PW) PW4164-1D, PW4168-1D, PW4168A-1D and PW4170 engines, and certain PW4164, PW4168, and PW4168A turbofan engines. This proposed AD was prompted by fuel nozzle-to-fuel supply manifold interface fuel leaks. This proposed AD would require inspecting fuel nozzles for signs of leakage, replacing hardware as required, and torqueing to specified requirement. We are proposing this AD to prevent fuel leaks which could result in engine fire and damage to the airplane.

We are adopting a new airworthiness directive (AD) for certain The Boeing Company Model 757-200, -200PF, -200CB, and -300 series airplanes. This AD was prompted by numerous reports of unintended lateral oscillations during final approach, just before landing. This AD requires, depending on airplane configuration, installing new relays and bracket assemblies, inspecting to ensure that the new relays do not contact adjacent wire bundles, torquing the bracket assembly installation nuts and ground stud nuts, doing bond resistance tests between the bracket assemblies and the terminal lugs on the ground studs, and related investigative and corrective actions if necessary. We are issuing this AD to reduce the chance of unintended lateral oscillations near touchdown, which could result in loss of lateral control of the airplane, and consequent airplane damage or injury to flightcrew and passengers.

Under this notice, the FAA announces the submission deadline of May 21, 2015, for winter 2015-2016 flight schedules at Los Angeles International Airport (LAX), Chicago's O'Hare International Airport (ORD), San Francisco International Airport (SFO), New York's John F. Kennedy International Airport (JFK), and Newark Liberty International Airport (EWR) in accordance with the International Air Transport Association (IATA) Worldwide Slot Guidelines. The deadline coincides with the schedule submission deadline for the IATA Slot Conference for the winter 2015 scheduling season.

The Federal Aviation Administration (FAA) and the National Park Service (NPS) are inviting interested persons to apply to fill three upcoming openings on the National Parks Overflights Advisory Group (NPOAG) Aviation Rulemaking Committee (ARC). The openings will represent general aviation concerns, air tour operator concerns, and Native American interests, respectively. Selected members will each serve 3-year terms.